OSD Audio ARCH-1 Bedienungsanleitung

OSD

AUDIO

Owner’s Manual

4” Multi-Purpose All

Weather Loudspeaker

1” Aluminum Tweeter

Dual 4” Polypropylene

4 - 8 Ohms

90dB 1W/1M

60Hz-20kHz

150 Watts

14 ¼” x 5 ⁄” x 10 ¼”

Each

10 Years

ARCH-1

Speaker Type:

Tweeter:

Woofer:

Impedance:

Sensitivity:

Frequency Response:

Power Handling::

Dimensions Satellite:

Unit of Measure:

Warranty:

Specification ARCH-1

RIGHT

FRONT

LEFT

FRONT

LEFT

REAR

RIGHT

REAR

LISTENING AREA

Diagram 2

SURROUND

RIGHT

FRONT

LEFT

FRONT

+ -

RIGHT

FRONT

LEFT

FRONT

LEFT

REAR

RIGHT

REAR

+ -

RIGHT

FRONT

LEFT

FRONT

LISTENING AREA

Diagram 1

SPEAKER CONNECTION

Left and Right Main Channel Speakers – For optimum

performance, place your speakers 6 to 15 feet (2 to 4.5m) apart

and at least 24 inches (60.8cm) from side walls. They may also

be toed-in slightly for better stereo imaging. The listening position

should be approximately 1 to 1.5 times the distance separating

the speakers. Refer to figures 1 and 2 for placement.

Rear Surround Channel Speakers – Rear surround speakers are

designed to recreate the sense of space and ambiance that many

of today’s surround sound technologies provide. ARCH-1 surround

speakers can be placed on the wall directly adjacent to or on the

wall behind the listening position using the foot as the mounting

bracket. Refer to Diagram 2 for placement.

CONNECTIONS

Conventional Connection – Using 16-gauge or larger speaker

wire, connect the RED “positive” (+) terminal of the LEFT

speaker to the RED “positive” (+) terminal of your amplifier’s

LEFT channel. Connect the BLACK “negative” (-) terminal of the

LEFT speaker to the BLACK “negative” (-) terminal of your

amplifier’s LEFT channel. Repeat this procedure for connecting

all remaining speakers to the appropriate amplifier

channels. Refer to Figure 3 and 4. Make sure no bare wires

from any of the connections touch any other bare wires or

terminals as this could cause a short and damage your

equipment.

Diagram 3 Diagram 4

The speakers have coded terminals that

accept a variety of wire connectors. The most

common connection is shown in the diagram

to the left. To ensure proper polarity, connect

each + terminal on the back of the ampliﬁer

or receiver to the respective + (red) terminal

on each speaker, as shown. Connect the –

(black) terminals in a similar way. See the

owner’s guides that were included with your

ampliﬁer, receiver and television to conﬁrm

connection procedures.

Receiver or Amplifier

FRONT SURROUNDFRONT

Appropriate

anchors

Mounting-Bracket

Mounting

Bracket

The mounting bracket is designed to trap the ﬂange of the ARCH-1

speaker by securing the mounting-bracket cap with two screws

through the bottom of the mounting bracket. Rest the ARCH-1

speaker’s rear ﬂange in the mounting bracket, as shown. This will

support the weight of the speaker. Slide the mounting-bracket cap

over the assembly. Secure the mounting-bracket cap by inserting

two screws (provided) in the bottom of the mounting bracket and

tightening.

Mounting Bracket

shown as looking

through the speaker.

WALL SURFACE-MOUNTING

WALL CORNER-MOUNTING

Appropriate

anchors

Top Cap

Mounting

Bracket

Mounting Bracket

shown as looking through

the speaker.

WALL/CEILING CORNER-MOUNTING

The customer is responsible for proper selection and use of mounting hardware (available through hardware

stores), to properly and safely wall-mount the speakers. The ARCH-1 speaker was designed to be easily

installed. However, if you are unable to clearly and fully understand and follow the instructions in this manual,

or if you are unsure of your ability to properly install these loudspeakers, please contact your dealer or a qualiﬁ

ed installer. Please do not use any power tools during installation. Power tools can exert excessive and

unnecessary torque which, in turn, can damage fasteners or other parts and accessories, reducing their

strength and causing possible failure of the fastener or part. A failed or damaged fastener or part may not be

able to perform as designed, and may lead to an unsafe installation.

The mounting bracket is designed to trap the ﬂange of the ARCH-1

speaker by securing the mounting-bracket cap with two screws

through the bottom of the mounting bracket. Rest the ARCH-1

speaker’s rear ﬂange in the mounting bracket, as shown. This will

support the weight of the speaker. Slide the mounting-bracket cap

over the assembly. Secure the mounting-bracket cap by inserting

two screws (provided) in the bottom of the mounting bracket and

tightening.

The mounting bracket is designed to trap the ﬂange of the ARCH-1

speaker by securing the mounting-bracket cap with two screws

through the bottom of the mounting bracket. Rest the ARCH-1

speaker’s rear ﬂange in the mounting bracket, as shown. This will

support the weight of the speaker. Slide the mounting-bracket cap

over the assembly. Secure the mounting-bracket cap by inserting

two screws (provided) in the bottom of the mounting bracket and

tightening.

Appropriate

anchors

Top Cap

Mounting

Bracket

Mounting Bracket

shown as looking

through the speaker.

OSD Audio • 775 Columbia St. • Brea • CA • 92821 • www.osdaudio.com • Tel (562) 697-2600

Andere OSD Audio Sprecher Handbücher

OSD Audio

OSD Audio NERO-WRSKII Bedienungsanleitung

OSD Audio

OSD Audio SPHERE-1 Bedienungsanleitung

OSD Audio

OSD Audio NERO Mini Bedienungsanleitung

OSD Audio

OSD Audio FORZA 850T-LUM Bedienungsanleitung

OSD Audio

OSD Audio BTP-650 Bedienungsanleitung

OSD Audio

OSD Audio ACE-500 Bedienungsanleitung

OSD Audio

OSD Audio BLACK EZ Series Bedienungsanleitung

OSD Audio

OSD Audio FORZA 5 Bedienungsanleitung

OSD Audio

OSD Audio NERO IWLCR53 Bedienungsanleitung

OSD Audio

OSD Audio T69LCR Bedienungsanleitung

OSD Audio

OSD Audio BLACK T63LCR Bedienungsanleitung

OSD Audio

OSD Audio LS2 Bedienungsanleitung

OSD Audio

OSD Audio NERO ARC 4SUB Bedienungsanleitung

OSD Audio

OSD Audio NERO-MODQ2 Bedienungsanleitung

OSD Audio

OSD Audio P83 Bedienungsanleitung

OSD Audio

OSD Audio Forza Bedienungsanleitung

OSD Audio

OSD Audio NERO ARC4 Bedienungsanleitung

OSD Audio

OSD Audio ICE-620ST Bedienungsanleitung

OSD Audio

OSD Audio Black BK-R62A Bedienungsanleitung

OSD Audio

OSD Audio BLACK Series Bedienungsanleitung

OSD Audio

OSD Audio ICE630ST Bedienungsanleitung

OSD Audio

OSD Audio NERO ARC4 Bedienungsanleitung

OSD Audio

OSD Audio AP525 Bedienungsanleitung

OSD Audio

OSD Audio ACE600ST Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung