OUTLINE S.R.L.
Via Leonardo da Vinci, 56
25020 Flero (Brescia) Italy
Tel.: +39 030.3581341
Fax +39 030.3580431
www.outline.it
4
1. SAFETY INSTRUCTIONS
We suggest you dedicate some time reading this
manual in order to get to know this product in depth
and ensure you make the most of its use.
It is important to remain at a suitable distance
from the sound reinforcement system, particularly
when it is used at high spl.
The
Superfly
system is designed for sound
reinforcement in medium-large sized venues and,
due to its performance, could cause hearing damage.
Safety precautions to be adopted are as follows:
• for all the information regarding the
installation of the system (rigging, derigging
and all related matters) the “
Superfly / Mantas
28 Rigging Manual
” must be consulted;
• any configuration of an Outline line array
system must necessarly be designed and
verified with OpenArray2 simulation software;
• for installation, the staff involved must know
and be familiar with the safety procedure to
follow in these situations;
• it is absolutely inadvisable to use material,
cables, amplifiers, acoustic prediction
software or anything else that is not expressly
foreseen by Outline.
Outline declines any and all responsibility
for damage or faulty operation caused by using
the
Superfly
system in a different way from that
expressly foreseen and specified:
• uncertified or unauthorized modification to
any part of the system can damage the system,
compromising its real efficiency and safety;
• it is advisable to carry out periodic inspections/
checks and any necessary maintenance of the
systems, cables and the amplifiers before
using them. In the event of wear or accidental
damage of the components, Outline will
provide specific support for their replacement;
• frequently check the conditions and correct
operation of the mechanical parts (details can
be found in the “
Superfly / Mantas 28 Rigging
Manual
”).
Since the system is equipped with loudspeakers/
transducers that produce a static magnetic field, it
is strongly advisable to keep any electronic devices
or magnetic media of any type (computers, hard
disks, magnetic card, etc) at a suitable distance
(approximately 1 metre) from the loudspeakers.
1.1. INSTRUCTIONS FOR DISPOSAL
The product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. When this
symbol of the crossed “wheelie” bin is attached to
a product, it means that the product is covered by
the European Directive 2012/19/EU and successive
amendments. This means that the product must NOT
be disposed of with other household-type waste.
Users are responsible for the disposal of their
electric andelectronic equipment,consigningittoan
approved disposal facility. For further information on
where it is possible to send equipment for recycling,
contact your local distributor. Correct disposal of the
old product will help to prevent potential negative
consequences for the environment and people’s
health.
1.2. CONFORMITY AND WARRANTY
All Outline electro-acoustic and electronic
devices are in conformity with the provisions
of EC/EU directives (as stated in our CE
declaration of conformity).
The CE declaration of conformity is attached to the
product warranty certificate and is shipped with the
product.
