Ovation Mainforce 1240 Bedienungsanleitung

User Manual

MAINFORCE 1240

12*40W LED moving head light with zoom

Caution!................................................................................................................. 3

Introduction........................................................................................................... 3

Safety instructions ............................................................................................... 3

Installation............................................................................................................. 4

Read ‘Safety information’ before installing the xture ....................................................................4

Fastening the xture to a at surface................................................................................................4

Mounting the xture on a truss ..........................................................................................................4

Securing with a safety cable...............................................................................................................5

DMX-512 connection/connection between xtures..........................................................................5

Control Menu Map ................................................................................................ 6

DMX Protocol........................................................................................................ 7

Fixture Cleaning ..................................................................................................11

Fuse Replacement...............................................................................................11

Troubleshooting ..................................................................................................11

The xture does not work, no light ..................................................................................................12

No response to the sound.................................................................................................................12

Specications ..................................................................................................... 12

Table of contents

3Version 1.0www.ovationlight.com

Caution!

Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric

shock when touching the wires!

Avoid looking directly into the light source!

Wear protective glasses and other PPE (personal protective equipment) when working on or near

the xture.

For your own safety, please read this user manual carefully before you initial start-up.

Follow operating safety precautions and pay attention to warning signs methods and equipment

on the user manual.

Indoor use only! To prevent risk of re or shock, do not expose this product to rain or moisture. IP

20 rating.

The ambient temperature must always be between -5° C and +45° C.

Always make sure you are connecting this product to the proper voltage in accordance with the

specications in this manual or on the product’s specication label.Make sure it is grounded when

using it!

Unplug mains lead before opening the housing!

Make sure that the power cord is never crimped or damaged by sharp edges. Check the xture

and the powercord from time to time.

Make sure to replace the fuse with another of the same type and rating.

Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot

during operation. After use, wait for a cool-down period of at least 10 minutes before handling or

transporting the device.

Every person involved with the installation, operation and maintenance of this device has to

- be qualied

- follow the instructions of this manual

- consider this manual to be part of the total product

- keep this manual for the entire service life of the product

- pass this manual on to every further owner or user of the product

- download the latest version of the user manual from the Internet

Introduction

Thank you for having chosen MainForce 1240. You will see you acquired a powerful and versatile device.

Unpack your item. Before you initial start-up, please make sure that there is no damage caused by

transportation. Should there be any, consult your dealer and do not use the device.

Safety instructions

This fixture is an extremely sophisticated piece of electronic equipment. To guarantee a smooth

operation, it is important to follow the guidelines in this manual. The manufacturer of this device will not

accept responsibility for damages resulting from the misuse of this xture due to the disregard of the

information printed in this manual.

This device has left our premises in absolutely perfect condition. Always disconnect from the mains,

when the device is not in use or before cleaning it. Keep away children and amateurs from the device!

There are no serviceable parts inside the device. Maintenance and service operations are only to be

carried out by authorized dealers.

4Version 1.0www.ovationlight.com

Installation

Read ‘Safety information’ before installing the xture

The xture is designed for indoor use only and must be used in a dry location with adequate ventilation. Ensure that

none of the xture’s ventilation slots are blocked.

Fasten the xture to a secure structure or surface. Do not stand it on a surface or leave it where it can be moved

or fall over. If you install the xture in a location where it may cause injury or damage if it falls, secure it as directed

in this user manual using a securely anchored safety cable that will hold the xture if the primary fastening method

fails.

Fastening the xture to a at surface

The xture can be fastened to a hard, xed, flat surface that is oriented at any angle. Ensure that the

surface and all fasteners used can support at least 10 times the weight of all xtures and equipment to

be installed on it.

Fasten the xture securely. Do not stand it on a surface or leave it where it can be moved or fall over.

If you install the xture in a location where it may cause injury or damage if it falls, secure it as directed

below with a securely anchored safety cable that will hold the xture if the primary fastening method fails.

Mounting the xture on a truss

The xture can be clamped to a truss or similar rigging structure in any orientation. When installing the

xture hanging vertically down, you can use an open-type clamp such as a G-clamp. When installing in

any other orientation, you must use a half-coupler clamp that completely encircles the truss chord.

To clamp the xture to a truss:

1. Check that the rigging structure can support at least 10 times the weight of all xtures and equipment

to be installed on it.

2. Block access under the work area.

3. Fold the legs of the mounting bracket together and bolt a rigging clamp securely to the mounting

bracket. The bolt used must be M12. It must pass through both mounting bracket legs and be

fastened with a self-locking nut.

4. Working from a stable platform, hang the fixture with its clamp on the truss and fasten the clamp

securely.

5. Secure the xture with a safety cable as directed below.

Securing with a safety cable

Secure the xture with a safety cable (or other secondary attachment) that is approved for the weight of

the xture so that the safety cable will hold the xture if a primary attachment fails.

Loop the safety cable through the eyebolt in the back of the xture and around a secure anchoring point.

Do not loop the safety cable around the fixture’s mounting bracket only, as this will leave the fixture

unsecured if it separates from the bracket.

5Version 1.0www.ovationlight.com

DMX-512 connection/connection between xtures

Occupation of the XLR-connection:

1. Group

2. Signal (-)

3. Signal (+)

DMX OUT

1. Group

2. Signal (-)

3. Signal (+)

DMX IN

If you are using controllers with this occupation, you can connect the DMX-output of the controller directly

with the DMX-input of the rst xture in the DMX-chain. If you wish to connect DMX-controllers with other

XLR-outputs, you need to use adapter-cables.

Building a serial DMX-chain:

Connect the DMX-output of the rst xture in the DMX-chain with the DMX-input of the next xture.

Always connect one output with the input of the next xture until all xtures are connected.

DMX-512 connection with DMX terminator:

For installations where the DMX cable has to run a long distance or is in an electrically noisy

environment, such as in a discotheque, it is recommended to use a DMX terminator. This helps in

preventing corruption of the digital control signal by electrical noise. The DMX terminator is simply an

XLR plug with a 120 resistor connected between pins 2 and 3, which is then plugged into the output XLR

socket of the last xture in the chain.

Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120

resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the

last xture.

Connection with the mains:

The MainForce 1240 is equipped with auto-switching power supply that automatically adjusts to any 50-

60Hz AC power source from 100-240 Volts.

This xture must be earthed. To use the xture, a plug must be xed.

The correct assembly of a sufcient plug may be done by professional persons only.

Connect the device to the mains with the enclosed power supply cable.

The occupation of the connection cables as below:

Cable color Connection International

Brown Live L

Blue Neutral N

Yellow/green Earth(Ground)

6Version 1.0www.ovationlight.com

Control Menu Map

Main Menu Second Third Fourth

Dmx Address 000 - 512

Fixture

Dmx Mode STD / EXT / GUI / HSI

Run Mode DMX / Host / Sound

Pan Invert Close / Open

Tilt Invert Close / Open

Manual

Pan 000 - 255

Pan Fine 000 - 255

Tilt 000 - 255

Tilt Fine 000 - 255

…… ……

Time Current Time xxxH

Total Time xxxH

Information

Power Count xxx

Sensor Pan FALSE / TURE

Tilt FALSE / TURE

Zoom FALSE / TURE

Temp FALSE / TURE

Fan FALSE / TURE

Temperature Head Temp xxxC

Fan Speed xxxxRPM

Software

Version Panel Vx.xx

Motor Vx.xx

Dimmer Vx.xx

Network Vx.xx

Factory

Password 000 - 255

Pan 000 - 255

Tilt 000 - 255

Zoom 000 - 255

Red 000 - 255

Green 000 - 255

Blue 000 - 255

White 000 - 255

Fixture Reset Motor Reset Cance / Run

Factory Cance / Run

Display

Language CH / EN

Display Flip Normal / Reverse

Display Mode 60s / Show

Network

Protocol ArtNet / Sacn

KlingNet Disable / Enable

Universe 000 - 255

Ip Address xxx.xxx.xxx.xxx

Subnet Mask xxx.xxx.xxx.xxx

7Version 1.0www.ovationlight.com

DMX channel

Standard(16 ch) DMX value Description

CH1 000-255 Pan 0-540°

CH2 000-255 Pan, ne

CH3 000-255 Tilt 0- 270°

CH4 000-255 Tilt, ne

CH5 000-255 Pan&Tilt speed, fast to slow

CH6 000-255 Dimmer

CH7 000-255 Dimmer, ne

CH8

000-003 Off

004-103 Steadily strobe, from slow to fast

104-107 On

108-207 Pulse strobe, from slow to fast

208-212 On

213-225 Randomly strobe in slow speed

226-238 Randomly strobe in middle speed

239-251 Randomly strobe in fast speed

CH8 252-255 On

CH9 000-255 Red

CH10 000-255 Green

CH11 000-255 Blue

CH12 000-255 White

CH13 000-255 Color temperature adjust

CH14 000-255 Color macro

CH15 1-100 Illusion effect

CH15 101-200 Wave effect

201-255 None

CH16 000-255 Zoom

CH17 000-059 None

060-099 All motors reset

100-200 Start programe

201-255 None

Extension(58 ch) DMX value Description

CH1 000-255 Pan 0-540°

CH2 000-255 Pan, ne

CH3 000-255 Tilt 0- 270°

CH4 000-255 Tilt, ne

CH5 000-255 Pan&Tilt speed, fast to slow

CH6 000-255 Dimmer

CH7 000-255 Dimmer, ne

8Version 1.0www.ovationlight.com

CH8

000-003 Off

004-103 Steadily strobe, from slow to fast

104-107 On

108-207 Pulse strobe, from slow to fast

208-212 On

213-225 Randomly strobe in slow speed

226-238 Randomly strobe in middle speed

239-251 Randomly strobe in fast speed

252-255 On

CH9 000-255 Red 1

CH10 000-255 Green 1

CH11 000-255 Blue 1

CH12 000-255 White 1

CH13 000-255 Red 2

CH14 000-255 Green 2

CH15 000-255 Blue 2

CH16 000-255 White 2

CH17 000-255 Red 3

CH18 000-255 Green 3

CH19 000-255 Blue 3

CH20 000-255 White 3

CH21 000-255 Red 4

CH22 000-255 Green 4

CH23 000-255 Blue 4

CH24 000-255 White 4

CH25 000-255 Red 5

CH26 000-255 Green 5

CH27 000-255 Blue 5

CH28 000-255 White 5

CH29 000-255 Red 6

CH30 000-255 Green 6

CH31 000-255 Blue 6

CH32 000-255 White 6

... 000-255 ...

CH53 000-255 Red 12

CH54 000-255 Green 12

CH55 000-255 Blue 12

CH56 000-255 White 12

CH57 000-255 Zoom

CH58

000-059 None

060-099 All motors reset

100-200 Start programe

201-255 None

9Version 1.0www.ovationlight.com

Shape(18 ch) DMX value Description

CH1 000-255 Pan 0-540°

CH2 000-255 Pan, ne

CH3 000-255 Tilt 0- 270°

CH4 000-255 Tilt, ne

CH5 000-255 Pan&Tilt speed, fast to slow

CH6 000-255 Dimmer

CH7

000-003 Off

004-103 Steadily strobe, from slow to fast

104-107 On

108-207 Pulse strobe, from slow to fast

208-212 On

213-225 Randomly strobe in slow speed

226-238 Randomly strobe in middle speed

239-251 Randomly strobe in fast speed

252-255 On

CH8 000-255 Red

CH9 000-255 Green

CH10 000-255 Blue

CH11 000-255 White

CH12 000-255 Color macro

CH13

001-006 Lamp bead 1 light up

007-013 Lamp bead 2 light up

014-020 Lamp bead 3 light up

021--027 Lamp bead 4 light up

028-034 Lamp bead 5 light up

035--041 Lamp bead 6 light up

042-048 Lamp bead 7 light up

049-055 Lamp bead 8 light up

056-062 Lamp bead 9 light up

063-069 Lamp bead 10 light up

070-076 Lamp bead 11 light up

10 Version 1.0www.ovationlight.com

077-083 Lamp bead 12 light up

084-090 3 pieces pendulums static shape 1

091-097 3 pieces pendulums static shape 2

098-104 3 pieces pendulums static shape 3

105-111 4 pieces pendulums static shape 1

112-118 4 pieces pendulums static shape 2

119-125 4 pieces pendulums static shape 3

126-132 3 pieces pendulums static shape 1

133-139 3 pieces pendulums static shape 2

140-146 3 pieces pendulums static shape 3

147-153 3 pieces static patterns in the middle

154-160 3 pieces static patterns in the outer ring

161-167 Windmill static patterns

168-174 1 piece owing water dynamic effect

175-181 2 pieces owing water dynamic effect

182-188 3 pieces owing water dynamic effect

189-195 3 pieces opposite owing water dynamic effect

196-202 4 pieces pendulums owing water dynamic effect

203-209 3 pieces pendulums owing water dynamic effect

210-216 Wave owing water dynamic effect

217-223 Windmill rotation effect

224-230 Petals bloom dynamic effect

231-237 Colorfule petals bloom effect

238-244 Colorfule petals wave effect

245-251 Colorfule petals rotation effect

252-255 Colorful rotation effect

CH14 000-255 Speed, shape effect speed choosing

CH15 000-255 Shape background color selection

CH16 000-255 Background color from bright to dark

CH17 000-255 Zoom

CH18

000-059 None

060-099 All motors reset

100-200 Start programe

201-255 None

HSI(11 ch) DMX value Description

CH1 000-255 Pan 0-540°

CH2 000-255 Pan, ne

CH3 000-255 Tilt 0- 270°

CH4 000-255 Tilt, ne

CH5 000-255 Pan&Tilt speed, fast to slow

Andere Handbücher für Mainforce 1240

Inhaltsverzeichnis

Andere Ovation DJ-Equipment Handbücher

Ovation

Ovation E-260WW IP Bedienungsanleitung

Ovation

Ovation B-2805FC Bedienungsanleitung

Ovation

Ovation POWER PAR 350 TW Bedienungsanleitung

Ovation

Ovation B-565FC Bedienungsanleitung

Ovation

Ovation H-605FC Bedienungsanleitung

Ovation

Ovation GR-1 IP Bedienungsanleitung

Ovation

Ovation MINI FRESNEL 50TZ Bedienungsanleitung

Ovation

Ovation B-2805FC Bedienungsanleitung

Ovation

Ovation CYC RGBW Bedienungsanleitung

Ovation

Ovation F-265WW Bedienungsanleitung

Ovation

Ovation CYC 3 FC Bedienungsanleitung

Ovation

Ovation HERO 700F Bedienungsanleitung

Ovation

Ovation F-55FC Bedienungsanleitung

Ovation

Ovation Pioneer 100 ZOOM WW/CW Bedienungsanleitung

Ovation

Ovation C-805FC Bedienungsanleitung

Ovation

Ovation E-260CW Bedienungsanleitung

Ovation

Ovation Mainforce 1240 Bedienungsanleitung

Ovation

Ovation F-55WW Bedienungsanleitung

Ovation

Ovation TRUECOLOR 336M Bedienungsanleitung

Ovation

Ovation C-805FC Bedienungsanleitung

Ovation

Ovation Explorer Bedienungsanleitung

Ovation

Ovation Ovation E260CW14 Bedienungsanleitung

Ovation

Ovation MIN-E-10CW Bedienungsanleitung

Ovation

Ovation E-260WW Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

JB Systems

JB Systems Lounge Laser DMX Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung