OXO ColorBeam 480 Bedienungsanleitung
INSTRUCTION MANUAL
MODE D’EMPLOI
FOR YOUR OWN SAFETY, PLEASE READ THIS INSTRUCTION MANUAL
CAREFULLY BEFORE YOU INITIALLY START-UP
POUR VOTRE SÉCURITÉ, MERCI DE LIRE ATTENTIVEMENT
CE MODE D’EMPLOI AVANT D’UTILISER VOTRE PRODUIT
V1.3 09/2019
ColorBeam 480
ENGLISH
COLORBEAM 480 - USER INSTRUCTION Page
1. In the box 4
2. Instructions 4
3. Overview 5
4. Operation guide 6
5. Technical data 15
6. Dimensions 15
7. Accessoires 16
FRANÇAIS
COLORBEAM 480 - MODE D’EMPLOI Page
1. Dans la boîte 18
2. Instructions 18
3. Vue d’ensemble 19
4. Utilisation 20
5. Données techniques 29
6. Dimensions 29
7. Accessoires 30
User Manual - COLORBEAM 480 V1.3 09/2019 4/32
1. In the box
• 1 ColorBeam 480
• 1 POWERCON TRUE ONE cable
• 1 Infra Red Remote
• 1 Omega
• 1 Instruction Manual
2. Instructions
WARNING
• Read the instruction in this manual carefully and thoroughly, as they give important
information regarding safety during use and maintenance. Keep this manual with the unit,
in order to consult it in the future. If the unit is sold or given to another operator, make
certain that it always has its manual, to enable the new owner to read about its operation
and relative instructions.
• To prevent fire or shock hazard, do not expose this product under a high temperature This
product must be earthed.
• Take care not to damage the power cord.
• After having removed the packaging check that the unit is NOT damaged in any way.
• If in doubt, DON’T use it and contact an authorized dealer.
• NEVER use the unit under the following conditions:
- In places subject to vibrations or bumps.
- In places with a temperature of over 40 °C or less than 0 °C.
• DO NOT open the unit-there are no user serviceable parts inside.
• NEVER try to repair the unit yourself. Repairs by unqualified people could cause damage
or faulty operation. Contact your nearest dealer.
• Wait for at least one second to turn on the power after turning off this unit.
• Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left within
children’s reach, as it can be dangerous.
• STOP using the unit immediately In the event of serious operation problems and either
contact your local dealer for a check or contact us directly.
• DO NOT dismantle or modify the unit.
• If in doubt, DON’T use it and contact an authorized dealer.
• This unit must only be operated by adults. DO NOT allow children to tamper or play with it.
3. Overview
User Manual - COLORBEAM 480 V1.3 09/2019 5/32
1. Power supply IN (POWERCON TRUE ONE)
2. DMX IN (XLR 5)
3. DMX IN (XLR 3)
4. DMX OUT (XLR 5)
5. DMX OUT (XLR 3)
6. Power supply OUT (POWERCON TRUE ONE)
7. Touch button "Mode / Up / Down / Enter" to navigate and change value in Menu
8. Display
User Manual - COLORBEAM 480 V1.3 09/2019 6/32
4. Operation guide
A- Default display after start
This part define all the display you could have by default, those display let you see directly
the state of the product.
ADDR 001
6 CH If DMX MODE display DMX Address and DMX Mode
RUN MODE
MANUAL Display if in MANUAL MODE
RUN MODE
MACRO Display if in MACRO MODE
RUN MODE
IR Display if IR is ON
B- Menu
To navigate thru menu use «up» and «down» button.
To validate and enter menu use «enter».
To get out menu use «menu».
1-DMX
ADDR DMX ADDRESS
DMX
001 Change DMX Address value from 001 to 512
User Manual - COLORBEAM 480 V1.3 09/2019 7/32
2-DMX
MODE To choose DMX MODE
MODE
06 CH
Change DMX Mode
3 Mode available 05 CH, 08 CH, 13 CH
3-MANUAL
MODE To choose values of MANUAL MODE
DIMMER Change Dimmer value from 000 to 255
RED
001 Change Red value from 000 to 255
GREEN
001 Change Green value from 000 to 255
BLUE
001 Change Blue value from 000 to 255
WHITE
001 Change White value from 000 to 255
SHUTTER
001 Change Shutter value from 000 to 255
MACRO
001
Choose Macro from 01 to 54
Check macros list after DMX Charts
MC SPEED
01
Change Speed of Macros from 01 to 99
Only available for dynamic macros (48 to 54)
User Manual - COLORBEAM 480 V1.3 09/2019 8/32
4- SLAVE
MODE To choose SLAVE MODE
SLAVE MODE
ON
if ON, product act as a Slave
See «Master/Slave Mode» topic here after
5-SETUP To set up product feature
FAN MODE
AUTO
If STUDIO then Fan is OFF and Power is -30%
if AUTO then Fan is regulated by temperature and power
is at max
DIM CURVE
000
To change dimmer curve adding a time on fade out
of 0s / 1,5s / 3s / 4s / 5s
NO DMX
HOLD
Define product behaviour after a DMX break
HOLD : keep the last DMX value
BLACKOUT : Go to dark
MACRO : Go to the last Macro used.
IR SWITCH
ON To activate or not the use of IR remote
DISPLAY To set up Display option
DP BACKLIGHT OFF
05 MIN
Define the time before Display goes Dark
10s / 30s / 1min / 5 min / NEVER
DP KEY LOCK
ON
To enable unlock code :
if OFF : After a delay (define by display DP BACKLIGHT
OFF), display goes OFF and autolock, to unlock push
MODE during 3s. To lock manually push MODE during
3s.
if ON : After a delay (define by display DP BACKLIGHT
OFF), system autolock, to unlock push MODE and in
séquence «Menu / up / down / enter». To lock manually
push MODE during 3s
User Manual - COLORBEAM 480 V1.3 09/2019 9/32
NO DMX DP FLASH
ON if ON, display flash if no DMX
RESET
DEFAULT If ON reset values to factory
TEMP UNIT To choose temperature unit : FAHRENHEIT / CELSIUS
6-INFO Display product info
TIME
INFO Display time info
TI CURRENT
0001 H
Display current time of use from last current time reset
max value is 9999 H
TI CUR CLEAR
OFF if ON reset current time value (password 050)
TI TOTAL
00001 H
Display total time of use from first use max value is
9999 H
TEMP
INFO Display temperature info
TEMP INFO
000°C Display current temperature
TEMP MAX
000°C Display max temperature reached by product
MODEL Display model of product
SOFTWARE Display software version of product
User Manual - COLORBEAM 480 V1.3 09/2019 10/32
C- MASTER / SLAVE MODE
To use master slave mode, link product as a daisy chain with Master in first position.
Then choose a mode for Master (DMX/MANUAL) and put every slave in SLAVE MODE/ON then
slave product will act as the master.
D-DMX CHART
MODE 5 CHANNELS
CHANNEL VALUES FEATURES
1Dimmer
000 - 255 Intensity 0 to 100%
2Red
000 - 255 Intensity 0 to 100%
3Green
000 - 255 Intensity 0 to 100%
4Blue
000 - 255 Intensity 0 to 100%
5White
000 - 255 Intensity 0 to 100%
Inhaltsverzeichnis
Sprachen:
Andere OXO Projektor Handbücher
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
