Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.
-Make sure all fastenings are tightly in place and that everything is in order before using
the product. This should be checked periodically by an adult.
-Do not discard any of the packaging until you have checked that you have all of the
parts and fittings required.
-Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is
completely assembled, then finish by tightening all nuts. All nuts must be tightened
before use.
-Do not carry out alterations or modifications to this product.
-Persons (including children) with reduced physical, sensory and mental capacities or
lack of experience and knowledge are not to use this product, unless persons
responsible for their safety have given them supervision or instruction concerning use
of the product.
-Always wear Personal Protective Equipment (PPE).
-Keep fingers, hair, loose clothing and jewellery away when closing the clamp to avoid
injury and/or property damage.
-Always keep your working area well-lit and clean. Cluttered or dark areas invite
accidents.
-Do not use this product in an explosive atmosphere, for example around paint,
flammable liquids, gases etc.
-Handle with care.
-Avoid accidental starting.
-Never leave any machines running unattended. Always turn the power off when you
are leaving any machinery unattended.
