Pacific Digital U-30109 Bedienungsanleitung
USB 2.0/1.1
CD-RW Drive
Installation Manual
BEFORE CALLING PACIFIC DIGITAL TECHNICAL
SUPPORT, PLEASE COMPLETELY READ THE
INSTALLATION SECTION OF THIS MANUAL
Thank You
Thank you for purchasing a Pacific Digital product. In this manual, you will find
information designed to help you understand the capability of your new Pacific Digital
drive, as well as a step-by-step explanation of how to install your product.
PACIFIC DIGITAL TECHNICAL SUPPORT
Our technical support staff is ready to assist you with any problem you may have with
your PDC product. Our hours of operation are Monday–Friday 7:00 AM to 6:00 PM
Pacific time.
You can contact Pacific Digital Technical Support at:
E-Mail: [email protected]
Internet:http://www.PacificDigital.com
Telephone: (949) 477-5715 or (888) 999-0732
Fax: (949) 252-9397
TROUBLESHOOTING GUIDELINES
Having trouble with your PDC Drive? Want to know more about how it works?
Check the list of common questions provided in this manual; you may find the
answers you need. If you don’t, or if the problem persists, Please visit Pacific Digital
online at www.PacificDigital.comto view our online FAQs, if you still need assistance
please contact PDC Technical Support.
CALLING PDC FOR ASSISTANCE
If you need to get in touch with the PDC Technical Support Department, please have
the following information on hand when you call:
Your Customer ID or Name, Address and Phone Number.
Your PDC Product Model and Serial Number.
Your Computers CPU, RAM, and Hard drive.
For more information about our products go to our website at
http://www.PacificDigital.com
(NOTE: Pacific Digital drives are warranted for a period
of One (1) year. You must keep your receipt readily available.
Pacific Digital will NOT replace under Warranty products for
ANY reason without a receipt).
2
Copyright, Trademarks, etc.
Copyright 1999-2002, by Pacific Digital Corporation (PDC). All rights reserved.
No part of this manual may be reproduced in any form or by any means (including
electronic storage and retrieval or translation into a foreign language) without prior
agreement and written consent from PDC as governed by United States and
international copyright laws.
It is the policy of PDC to improve products as new technology becomes available. PDC
reserves the right to revise this manual and make changes to its content at any time,
without obligation to notify any person or entity of such revisions. While great care has
been taken in preparing this manual and the products it describes, PDC cannot be held
responsible for any errors or omissions that the manual or products may contain or
exhibit. Any alteration or misuse of these products voids any expressed or implied
warranties.
“Windows” and “Windows NT” are registered trademarksof Microsoft Corporation
(U.S.) in the U.S. and other countries.
Pacific Digital Corporation herewith declares that it will not be liable in any way for
any loss of data or any other damage, whether direct or indirect, caused by the
operation or malfunctioning of this product. Backup important data to protect it from
possible loss.
3
Table of Contents
Model and Serial Number
5
Parts and Functions
6
Getting Started 7
PCI Card Installation 8
USB CD-RW Installation 9
USB CD-RW Installation Continued 10
USB CD-RW Installation Continued 11
Bundled Software 12
Bundled Software Continued 13
Handling Guidelines 14
Handling Guidelines Continued 15
Handling Discs 16
Troubleshooting 17
USB Troubleshooting
18
USB Troubleshooting Continued
19
USB Troubleshooting Continued 20
Notes and Information 21
Notes
22
Notes 23
4
Model and Serial Number
Product Model
Number
???
Product Serial
Number
???
Example Label (may vary)
Please record the PDC model and serial number from the bottom of the PDC drive or
the side of the PDC box. Record this information to the form on page 22 to keep for
reference. The serial number is located on a long bar-code label and is
required for Technical Support and Product Registration.
Register Online at
http://www.PacificDigital.com/support/register.html
5
Parts and Functions
Front View (May Vary)
1. Operation indicator lamp
2. Head Phone Jack
Used for headphones or speakers for audio from an Audio CD.
3. Open/close button
4. Shutter or tray
5. Volume Wheel
Used to adjust the volume of an Audio CD within the drive.
6. Manual eject hole
Used to manually eject the tray in an event when it will not open normally.
Rear View
1. Audio Jacks
2. USB 2.0 Port
3. A/C Power Connector
4. Power Switch
6
Getting Started
PACKAGE CONTENTS
Drive
Power Supply
USB 2.0/1.1 Cable
USB 2.0 PCI Card
(Not supplied in some
configurations)
Burner bundle software & Blank
CD-R disk
7
PCI Card Installation
Insert the USB 2.0 PCI card into an available PCI slot on your Motherboard.
NOTE: If you are not using the USB 2.0 PCI card supplied, because of
limitations in USB 1.1 technology, your USB 2.0 drive will only be able to function as
a 4x4x8 CD-Writer.
8
USB CD-RW Installation
9
Step 1: Power down the computer, and remove the computer cover.
Step 2: Locate an available PCI slot on the Motherboard. (Typically white in
color). If there is a face shield covering the opening, remove the face
shield.
Step 3: Insert the USB 2.0 card into the PCI slot on your Motherboard, and
secure it with the screw that secured the face shield. NOTE: Make sure
the USB 2.0 card is seated properly before securing it.
Step 4: Install the computer cover. (Refer to the computer owners manual)
NOTE: Do not connect your USB 2.0 CD-Writer to your PCI
USB 2.0 card until Step 7.
Step 5: Power on the computer, and place the “Burner Bundle” CD into your
“CD-ROM”
NOTE: Do not place in your External USB 2.0 CD-Writer.
Step 6:Upon Windows?boot up, Windows?hardware wizard should detect a
new device.
When prompted for the location of the driver, Select “Specify Location”
and then click “Browse”.
USB CD-RW Installation Continued
10
Step 7:Make sure you are browsing the CD-ROM drive where the “Burner
Bundle” is located. Locate the “Drivers” folder and “Double Click” on it.
Locate the “IOGear” folder and “Double Click” on it. Click “OK” or
“Next”. Follow the Wizard instruction, and restart your computer after
installation of the driver is complete.
Now you can connect your USB 2.0 cable from your USB 2.0 CD-Writer
to your USB 2.0 PCI card.
NOTE: In order for the PDC USB 2.0 CD-Writer to record at high
speed make sure you are using a dedicated USB 2.0 port. Do not run the
PDC USB 2.0 CD-Writer through a USB hub, unless it is a USB 2.0 hub.
Step 8: Power on your Computer and the USB 2.0 CD-Writer. The USB 2.0
drive has an LED “Busy Light” that will flash letting you know that the
drive has received power. If your LED “Busy Light” does not flash, make
sure the power switch located on the back of the USB 2.0 CD-Writer is
on.
Step 9: Your Computer will automatically detect the External USB 2.0 CD-
Writer. Check “Search for best drivers for your device” and click “Next”.
Inhaltsverzeichnis
Beliebte CD/CDR-Laufwerk Handbücher anderer Marken
SmartDisk
SmartDisk Firewire CD-R/W Bedienungsanleitung
Axis
Axis CD-ROM SERVER Bedienungsanleitung
LG
LG CRD-8322B Bedienungsanleitung
Memorex
Memorex 32023234 - 52x32x52x External USB2.0 CD... Montageanleitung
Yamaha
Yamaha CD Recordable/Rewritable Drive CRW3200 Bedienungsanleitung
Sony
Sony CRX230AE Bedienungsanleitung
