Packard Bell Smart TV32 Bedienungsanleitung

English . . . . . . . . . . . . . . . . . . . 3

Français . . . . . . . . . . . . . . . . . 17

Español . . . . . . . . . . . . . . . . . . 31

Italiano . . . . . . . . . . . . . . . . . . 45

Deutsch . . . . . . . . . . . . . . . . . . 59

Nederlands . . . . . . . . . . . . . . . 73

Dansk . . . . . . . . . . . . . . . . . . . 87

Norsk . . . . . . . . . . . . . . . . . . 101

Svenska . . . . . . . . . . . . . . . . . 115

Suomi . . . . . . . . . . . . . . . . . . 129

Getting Started Guide -

ENGLISH

GETTING STARTED GUIDE

Packard Bell Smart TV32

manual may be reproduced or transmitted, in any form or by any means,

whether electronic, chemical, manual or otherwise, including but not

limited to photocopying, recording, or information storage and retrieval

systems, for any purpose without prior written permission of Packard

Bell B.V.

Disclaimer

Packard Bell B.V. specifically disclaims all warranties, either express or

implied, including, but not limited to, implied warranties of merchant-

ability and fitness for a particular purpose with respect to this product

and documentation. Updates to hardware components are made regu-

larly. Therefore some of the instructions, specifications and pictures in

this documentation may differ slightly from your particular situation.

All items described in this guide are for illustration purposes only and

may not apply to your particular situation. No legal rights or entitle-

ments may be obtained from descriptions made in this manual.

Packard Bell B.V. reserves the right to revise or make changes or

improvements to this product or documentation at any time without

obligation to notify any person of such revisions or improvements. In no

event shall Packard Bell B.V. be liable for any consequential or inci-

dental damages, including but not limited to loss of business profits or

any other commercial damages, arising out of the use of this product.

Trademarks

Packard Bell is a registered trademark of Packard Bell B.V. All other

company or product names are trademarks, registered trademarks or

service marks of their respective owners.

Product Disposal

The Waste Electrical and Electronic Equipment

(WEEE) Directive requires that the used electrical and

electronic products must be disposed of separately

from normal households waste in order to promote

reuse, recycling and other forms of recovery and to

reduce the quantity of waste to be eliminated with a

view to reducing landfill. This includes accessories

such as a remote control, power cords, etc. When you dispose of such

products, please follow the guidance of your municipal authority and/

or ask your retailer when purchasing a new product.

FOR YOUR SAFETY

Before operating the TV please read this manual thoroughly. This

manual should be retained for future reference.

The changes or modifications not expressly approved by the party

responsible for compliance could void the user's authority to

operate the equipment.

Shielded interface cables and AC power cord, if any, must be

used in order to comply with the emission limits.

The manufacturer is not responsible for any radio or TV interfer-

ence caused by unauthorized modification to this equipment. It

is the responsibilities of the user to correct such interference.

Warning

To prevent fire or shock hazard, do not use the plug with an extension

cord, receptacle or other outlet unless the plug can be fully inserted, to

prevent fire or shock hazard. Do not expose this appliance to rain or

moisture. Dangerously high voltages are present inside the TV.

The lightning flash with arrowhead symbol within an equilat-

eral triangle is intended to alert the user to the presence of

uninsulated dangerous voltage within the product's enclosure

that may be of sufficient magnitude to constitute a risk of elec-

tric shock to persons.

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE THE COVER. NO USER SERVICEABLE PARTS

INSIDE, REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Important safety instructions

Read before operating the equipment

• Read, follow and keep these instructions.

• Heed all warnings.

• Do not use this apparatus near water.

• Clean only with a dry cloth.

• Do not block any ventilation openings. Install in accordance with

the manufacturer's instructions.

• Do not install near any heat sources such as radiators, heat regis-

ters, stoves or other apparatus (including amplifiers) that produce

heat.

• Do not defeat the safety purpose of the polarised or grounding-type

plug. A polarised plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong is provided for your

safety. If the provided plug does not fit into your outlet, consult an

electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on and from pinching.

• Only use attachments/accessories specified by the manufacturer.

• Unplug this apparatus during lightning storms or when unused for

long periods of time. Please note that the product warranty does

not apply if damage to the product is the result of a lightning strike.

• Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, has

been exposed to rain or moisture, does not operate normally or has

been dropped.

• You must unplug the power supply cord to disconnect the appara-

tus from the power supply. With this in mind, the socket-outlet

should be located close to the apparatus and should also be readily

accessible.

• Use only with a cart, stand, tripod, bracket, or table specified by the

manufacturer, or sold with the apparatus. When a cart is used, use

caution when moving the cart/apparatus combination to avoid

injury from tip-over.

• The TV should be operated only from the type of power source

indicated on the label. If you are not sure of the type of power sup-

plied to your home, consult your dealer or local power company.

• This product may contain lead or mercury. Disposal of these mate-

rials may be regulated due to environmental considerations. For

disposal or recycling information, please contact your local author-

ities.

• Damage Requiring Service - The appliance should be serviced by

qualified service personnel when:

> The power supply cord or the plug has been damaged; or

> Objects have fallen, or liquid has been spilled into the appli-

ance; or

> The appliance has been exposed to rain; or

4 -

Contents

> The appliance does not appear to operate normally or exhibits

a marked change in performance; or

> The appliance has been dropped, or the enclosure damaged.

• Tilt/Stability - All televisions must comply with recommended

international global safety standards for tilt and stability properties

of its cabinets design.

> Do not compromise these design standards by applying exces-

sive pull force to the front, or top, of the cabinet, which could

ultimately overturn the product.

> Also, do not endanger yourself, or children, by placing elec-

tronic equipment/toys on the top of the cabinet. Such items

could unsuspectingly fall from the top of the set and cause

product damage and/or personal injury.

• Wall or Ceiling Mounting - The appliance should be mounted to a

wall or ceiling only as recommended by the manufacturer.

• Power Lines - An outdoor antenna should be located away from

power lines.

• Outdoor Antenna Grounding - If an outside antenna is connected

to the receiver, be sure the antenna system is grounded so as to

provide some protection against voltage surges and built up static

charges.

• Section 810 of the National Electric Cord, ANSI/NFPA No. 70-

1984, provides information with respect to proper grounding of

the mats and supporting structure grounding of the lead-in wire to

an antenna-discharge unit, size of grounding connectors, location

of antenna-discharge unit, connection to grounding electrodes and

requirements for the grounding electrode. See Figure below.

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL

ELECTRICAL CODE

Note to the CATV system installer: This reminder is provided to call

the CATV system installer's attention to Article 820-40 of the NEC

that provides guidelines for proper grounding and, in particular,

specifies that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as

practical.

• Objects and Liquid Entry - Care should be taken so that objects do

not fall and liquids are not spilled into the enclosure through open-

ings.

CONTENTS

Introduction ............................................................... 5

Main Features ............................................................................... 5

Additional Features .................................................................. 5

Box Contents ................................................................................ 5

Disc Types ..................................................................................... 6

DVDs ...................................................................................... 6

SVCD/VCD/AUDIO CDs ........................................................ 6

MP3/JPEG (Audio/Image files) ............................................... 6

Playable and Unplayable discs ........................................................ 6

Recordable Discs ........................................................................... 6

Getting Started ........................................................... 7

Installation .................................................................................... 7

Packard Bell Smart TV32 Installation ....................................... 7

Positioning the Packard Bell Smart TV32 .................................. 7

Matching the Remote Control, Keyboard and Mouse to

the Packard Bell Smart TV32 ................................................... 7

Connecting a Set-top box ......................................................... 7

Connecting Surround Sound Speakers ...................................... 8

Alternative Source Signals (Video and Audio) ........................... 8

Starting the Packard Bell Smart TV32 ....................................... 8

Controls and Connectors ............................................ 9

Front Panel .................................................................................... 9

Left panel ................................................................................ 9

Centre panel ............................................................................ 9

Right panel .............................................................................. 9

Remote Control Receiver / Power Saving Button ..................... 9

Left Side Connectors .................................................................... 10

Quality of Connections .......................................................... 10

On-Screen Display (OSD) .......................................... 11

Control buttons ..................................................................... 11

OSD Sections ........................................................................ 11

Specifications ........................................................... 12

Packard Bell Limited Warranty ................................. 13

Regulatory Information ............................................. 16

Antenna

discharge unit

Grounding conductors

Power service grounding electrode system

Ground clamps

Electric service equipment

Ground clamps

Introduction -

ENGLISH

INTRODUCTION

The

Packard Bell Smart TV32

is a digital entertainment centre,

combining a high definition (HDMI compatible) LCD screen with

audio and video functions normally found in DVD player/recorders or

PVRs (powered by

Windows XP Media Center 2005

). This provides a

television, a DVD player, an PVR recorder, music player, photo

viewer, radio and a fully-featured computer, all in a single unit.

Please visit

www.packardbell.com

for all the latest support infor-

mation and downloads for your product.

MAIN FEATURES

Dual-tuner television

• Receive analogue or digital television signals.

• Watch one channel while recording another.

• Large widescreen LCD panel.

DVD Player

• Plays pre-recorded DVDs and Audio CDs.

• Surround sound for up to 8 (‘7.1’) separate audio channels.

PVR Recorder

• Record functions include Time Shifting (see below).

• Store and play multimedia files (music, photos, videos).

• Transfer files between USB devices, DVDs and the internal HDD.

• MP3 and WMA support.

• Record TV shows and transfer home videos to DVD.

Time Shifting

• Simultaneous video recording and playback.

• Pause and later resume live TV broadcasts. Fast forward, fast

rewind and jump to any point in the recording.

• Instant replay of up to 30 minutes.

DVD/CD Player

• 16:9 and 4:3 TV screen aspect ratio support.

• Playback functions including Program, Repeat, Fast Forward/

Reverse, Zoom, etc.

• Supports multiple audio languages, subtitle languages and disc

menu languages. Supports all normal DVD playback features.

• Compatible with DVD, Super VCD, VCD, CD, CD-R discs, can

play MP3, JPEG and Picture CD.

• Copy protection technology from Macrovision.

Program Recording

• Record from TV tuner or analogue AV input.

• Play a previously recorded programme while recording another

programme.

• Programmable timer for recording a single or recurring TV pro-

gramme.

• Set time-recording events with three options: "Once", "Daily"

and "Weekly".

• Record TV at the press of a button.

DVD Archiving

• Archive recordings on DVD.

• DVDs recorded using the Smart TV32 can be played on most

current and future DVD players.

Personal Video Archiving

• Transfer videos from a VCR, analogue camcorder or digital (DV)

camcorder to DVD.

Connectors

• Input: Aerial, Memory Card Reader, S-Video, Composite, stereo

audio, USB, SCART (x2), HDMI, Component.

• Digital input (IEEE 1394) connector for digital video cameras;

audio and video signals are transmitted via the same cable.

• Standard video inputs (CVBS), S-video, SCART IN and compo-

nent video (Y, Cb/Pb, Cr/Pr).

• Coaxial digital audio out connector.

• Connects with USB flash drives, USB memory card readers and

USB cameras.

Fully-featured computer (with Microsoft Windows XP Media

Center Edition 2005)

• Designed for quiet operation.

• Ready for Internet access - includes ready-to-use antivirus.

• Play games (online or offline) or manage your home ‘office’.

• Compatible with standard PC software packages.

Additional Features

• Parental Lock Level control system.

• Progressive Scan creates a picture with twice the scan lines of

traditional Component Video. This results in reduced picture

flickering and motion artifacts as well as a sharper image on large

screens.

This product contains copy protection tech-

nology, which is protected by US Patent

and other intellectual property rights. Use

of this copy protection technology from Macrovision Corporation

requires the approval of Macrovision. It is intended exclusively for

home use and other limited pay-per-view applications, unless Macro-

vision approves some other use in writing. Modifications to the

equipment, removal of components and reverse engineering are

prohibited.

BOX CONTENTS

• Smart TV32, stand and screws

• Remote control unit and wireless receiver

• Keyboard, mouse and wireless receiver

• Batteries (6 x AA)

• Power cable

• IR Blaster

• Aerial Splitter Cable.

• Packard Bell Smart TV32 Getting Started Guide

• Packard Bell Smart TV32 Operating Guide

• Warranty guide

6 -

Introduction

DISC TYPES

DVDs

DVD discs are divided into one or more titles. Each title may be

further divided into several chapters. Sometimes a chapter may

contain index points dividing the chapter into several parts.

Multi-Angle

You can view scenes from different camera angles when watching

movies or other media containing multiple playback angles.

Multiple Audio Languages

You can select the language when watching movies or discs that

provide multiple languages and/or audio soundtracks.

Multi-Language Subtitles

You can select the subtitle language or turn subtitles off when

watching movies or discs that have multi-language subtitles recorded

on them.

SVCD/VCD/AUDIO CDs

SVCD/VCD/AUDIO CD are divided into tracks. A track can

sometimes contain a number of index points.

MP3/JPEG (Audio/Image files)

MP3 is a compressed audio file format that uses the file extension

“mp3” or “.MP3”. JPEG is a compressed image file format that uses

the file extension “.jpg” or “.JPG”.

The Smart TV32 may take some time to display the list of

disc contents, especially if the disc contains a lot of data.

PLAYABLE AND UNPLAYABLE DISCS

The Smart TV32 supports almost all types of CD-type discs, except:

• HD-DVD (only on certain configurations).

• Blu-ray discs.

• Unfinalised discs from other DVD/CD recorders.

• It is not guaranteed that all ‘R’ or ‘RW’ discs are supported due

to the unknown quality of the disc used or the condition of the

recording.

RECORDABLE DISCS

DVD±RW (rewritable DVD discs)

DVD±RW is an erasable format using discs that may be rewritten

more than 1,000 times.

DVD±R (write-once DVD discs)

DVD±R (write-once DVD discs) DVD±R discs can only be written

once. Several recordings can be made on the same disc as long as the

disc is not finalised or full.

If the disc is finalised, you can not edit or record on the disc,

even though unused capacity may still be available. If you

want to play a DVD±R created with your Smart TV32 on

another player, please make sure it has been finalised. Like-

wise, you must use the "make compatible" option if you

want to play a DVD±RW disc on another player.

Dual-layer DVD (DVDR9)

Dual Layer DVDs are high-capacity DVD discs (with 8.5GB of

storage, compared to the 4.7GB capacity on a standard DVD).

Getting Started -

ENGLISH

GETTING STARTED

INSTALLATION

The Packard Bell Smart TV32 provides many connection options that

should be made carefully for the best results. To make the first

connection as easy as possible, follow the

Installation Guide

(the

large sheet provided in the box) that illustrates the first connections

you should make. Other items may be connected before you start

using the Smart TV32; a set-top box (e.g. a receiver for satellite

signals) may be connected before you perform the first detection of

TV channels. However, this is not necessary and you may add a set-

top box later.

Packard Bell Smart TV32 Installation

Follow the steps described on the

Installation Guide

. This describes

how to attach the stand, connect wireless receivers for peripherals

(such as the keyboard and remote control), connect the TV aerial

and other steps that are necessary before turning on the Smart TV32.

We recommend that two people are present during installa-

tion.

Please check that you have:

• Firmly attached the Smart TV32 stand.

• Connected the receivers (USB ‘key’ devices) for the remote con-

trol and keyboard/mouse.

• Correctly inserted batteries in the remote control, keyboard and

mouse.

• Attached the splitter cable to the TV tuners and the aerial cable.

• Connected the power cord.

• Performed the matching process for the remote control, key-

board and mouse (using the ‘connect’ button on each device, see

below.)

And optionally:

• Connected the WiPen USB device for wireless network access.

• Connected a set-top box for cable or satellite channels.

• Connected an amplifier for surround sound.

Battery Notes:

Dispose of the batteries in a designated disposal area.

Do not throw the batteries into fire.

Do not mix battery types or combine used batteries with new

ones.

Remove dead batteries immediately to prevent battery acid from

leaking into the battery compartment.

If you do not intend to use the device for a long period, remove

the batteries.

Positioning the Packard Bell Smart TV32

Place the Smart TV32 on a solid surface.

• Ensure that the TV is placed in a position to allow free flow of

air. Do not cover the ventilation openings on the back cover.

• To prevent any unsafe situations, no naked flame sources, such

as candles, should be placed on or in the vicinity of the TV.

• Avoid heat, direct sunlight and exposure to rain or water. The

equipment shall not be exposed to dripping or splashing.

Matching the Remote Control, Keyboard and Mouse to

the Packard Bell Smart TV32

When you first start the Smart TV32, it may not recognise the

remote control, keyboard or mouse (i.e. nothing happens when you

press a button). These devices must be ‘matched’ to the Smart TV32

to avoid interference with similar devices.

Two receivers are provided, one for the remote control, and another

for the keyboard and mouse.

1. Press the

connect

button on the keyboard/mouse receiver (check

that the mouse is on).

2. Press the

connect

button on the underside of the keyboard for 3

seconds.

3. Wait 5 seconds.

4. Press the

connect

button on the underside of the mouse for 3 sec-

onds.

5. Press the

connect

button on the remote control receiver.

6. Press the

connect

button on the remote con-

trol.

The devices should now be correctly matched. If

a device does not function, check the batteries

then repeat the matching process.

Connecting a Set-top box

If you have a set-top box (to

decode satellite, cable, ADSL or

other television signals) you

may connect it to the Smart

TV32 and add the channels to

the Smart TV32 channel list.

A set-top box should be

connected to the lower SCART

connector on the Smart TV32

(labelled

AV IN (PC)

). Make

sure the set-top box is plugged

in and on when scanning for

channels. ‘IR blaster’

8 -

Getting Started

IR Blaster

An infrared signal received by the Smart

TV32 (from a remote control) may be

transmitted to a set-top box or similar

device using an

IR blaster

cable.

Connect the cable to the port below the

SCART connector, then use the

adhesive pad on the IR blaster cable to

attach the end of the cable to the remote control receiver window on

the device, which may then be hidden or installed in another

location.

Connecting Surround Sound Speakers

If you have a set of Surround Sound speakers (5.1 or 7.1) you may

connect them to the Smart TV32 via an amplifier.

A compatible amplifier may be connected to the orange RCA

connector (S/PDIF output). This connector provides a 5.1 or a 7.1

audio signal (depending on the sound source and settings used).

Alternatively, multiple pairs of amplified speakers may be connected

to the four 3.5mm audio outputs on the underside of the computer

(green, orange, grey and black - the Smart TV32 speakers should

already be connected to the green Line-out jack).

These connections are only used by devices using Windows

Media Center for playback. External devices (such as a

games console) must be connected directly to an amplifier or

other dedicated speakers to benefit from surround sound - if

the device uses the Smart TV32 audio connection only the

built-in stereo speakers will be used.

Alternative Source Signals (Video and Audio)

Many of the functions of the Smart TV32 are handled through the

Windows Media Center

interface. However certain devices (such as

a games console or an HDMI compatible player may use the alter-

native source connectors to access the screen and speakers directly.

The connectors at the top of the

left-hand side of the Smart TV32

allow you to connect these alter-

native sources. These are:

A. RCA audio (A1) and Compo-

nent video (A2).

B. HDMI video/audio.

C. SCART video/audio (see

Connecting a Games Console

(or similar device)

, below).

The audio connection provided by these connectors uses the

Smart TV32’s stereo speakers. It you wish to use a different

sound output (such as an amplifier), you should separate the

audio and video signals with an appropriate cable and con-

nect the audio signal directly to the alternative device.

The connection provided by the second SCART connector is

for devices that provide television signals, see Connecting a

Set-top box, above.

Changing the Source Signal

Use the Source button on the remote

control (or front panel) to change the

source signal shown on the screen.

HDMI - Uses an HDMI signal connected to

the HDMI port.

YPbPr - Uses the Component Video and

RCA audio connections .

SCART (x3) - Three SCART modes are

available, depending on the type of signal

being used. Select the option that gives the best image quality.

PC - Activates

TV/PC

mode and displays either the television, the

Windows Media Center interface or the Windows desktop.

Please complete the Smart TV32 installation before using

the source button.

Connecting a Games Console (or similar device)

A dedicated SCART connector allows you to use the Smart TV32

screen directly. This provides the fastest response times for the best

gaming experience.

If you require stereo sound from the games console, the SCART

connection may be used to carry the audio signal.

Starting the Packard Bell Smart TV32

Press the

Power Button

(on the

left side) to turn on the Smart

TV32. The first time you start

the Smart TV32, you will be

guided through several steps to

ensure that the Smart TV32

functions at it’s best.

The

Welcome to Microsoft Windows

section allows you to register

some information with Microsoft, and then the

Packard Bell Regis-

tration

section allows you to do the same with Packard Bell. These

steps may help you if you need to contact either organisation in the

future.

You may use the mouse, keyboard or remote control to complete

these steps. Make sure that the devices have been ‘matched’ to the

Smart TV32 (with the

Connect

buttons, see page 7). Use the mouse

or remote control to move the cursor, and left-click or use the OK

button to make selections. If you need more practice to master the

remote control or mouse, you may use the keyboard to select

options: Use the

Tab

key to move between options, the

space bar

select an option and the

Enter

key to confirm a selection.

When you have finished entering this initial information,

Windows

Media Center

will start. You will be asked some questions that will

allow you to use the Smart TV32 in the best possible conditions.

Please refer to the

Operating Guide

for further information.

Turning off the Smart TV32:

The Smart TV32 features a Standby power mode that

quickly turns on and off the Smart TV32 during day-to-day

use. Use the remote control power button or the Standby

button on the front of the Smart TV32 to enter or exit

Standby mode.

If you use the main power button (on the left side) to power-off

the Smart TV32, it will not make programmed recordings while

it is off and may take several minutes to display a television image

after being turned on.

Controls and Connectors -

ENGLISH

CONTROLS AND CONNECTORS

FRONT PANEL

The Packard Bell Smart TV32’s front panel provides easy access to

connectors and controls. Three panels hide these elements from

view, with a remote control receiver / power indicator visible in

the lower-right corner.

The connectors on the front panel may only be used with

Windows Media Center.

Left panel

Optical Drive External Bay

Optical Drive - The Smart TV32 includes a slim line optical drive.

Use this to watch DVD movies, listen to CDs or load computer appli-

cations.

Certain models may feature a slot-loading optical drive. Only

use 12cm discs with a slot-loading drive.

External bay - This bay may contain a

Memory Card Reader/Writer

Memory cards are used in a wide selection of

digital cameras, PDAs, MP3 players and mobile

phones. Use the card reader to transfer files to

and from compatible cards.

If present, the IEEE 1394/Firewire port may be

used as a DV input connector to connect a

digital video camera.

Centre panel

The centre panel provides screen and volume controls

Menu: Accesses the OSD (On Screen Display). The OSD menu

allows you to change settings for the screen in four sections:

Video

Audio

Options

and

Screen

Arrow keys: The four arrow keys allow you to navigate in when

using the OSD. When the OSD is not active, some keys perform a

second function:

Up / Display Mode: Change display mode. Changing the display

mode adjusts the aspect ratio shown on the screen, allowing you to

adjust to a format that is not automatically detected in

Auto

mode

(default).

Left/Right / Volume controls: Change the volume of the speakers.

Channel select: Browse through television channels when using

Windows Media Center.

Source: Use the Source button to change the source signal (

HDMI

YPbPr

SCART

) shown on the screen.

Right panel

A series of connectors can be found behind the bottom-right panel.

These connectors allow you to easily connect external storage (via

USB), video cameras or similar devices as they are needed.

These connectors may only be used by Windows XP Media

Center to capture video signals. To view a video signal

directly on the screen (as an alternative AV source), use the

upper SCART connector on the left side panel.

1. S-VIDEO. S-Video input connector, use to connect an appropriate

video device.

2. VIDEO In. RCA video input connectors. Use to connect an appro-

priate video device.

3. L+R Audio In. RCA audio input connectors. Use to connect an

appropriate audio input. The audio input can be used when a

video device is connected to the S-Video or Composite ports.

4. Microphone input socket.

5. Headphone output socket.

6. USB connectors which can be used to connect a USB device,

including USB Mass Storage devices such as MP3 players or

external hard disk drives.

Speakers and motherboard audio connectors may be turned

off when headphones are connected.

Remote Control Receiver / Power Saving Button

1. This sensor receives the IR signal from

the remote control (used when the

Smart TV32 is not using

Windows

Media Center

2. Pressing this button will place the

Smart TV32 into a power saving mode

(Standby).

If you use the main power button (on the left side) to power-off

the Smart TV32, it will not make programmed recordings while

it is off and may take several minutes to display a television image

after being turned on.

If the Smart TV32 does not start normally after being placed

into a power saving mode, use the main power button (on

the left-hand side) to start the Smart TV32.

12 3 4 5 6

10 -

Controls and Connectors

LEFT SIDE CONNECTORS

1. Master Power Button - Press the power button to turn the Smart

TV32 on, or to completely power-down the Smart TV32.

Turning off the Smart TV32:

The Smart TV32 features a Standby power mode that

quickly turns on and off the Smart TV32 during day-to-day

use. Use the remote control power button or the Standby

button on the front of the Smart TV32 to enter or exit

Standby mode.

If you use the main power button to power-off the Smart TV32,

it will not make programmed recordings while it is off and may

take several minutes to display a television image after being

turned on.

2. RCA Audio (Left/Right) - these audio connectors are activated

when Component In is used as the AV source.

3. Component In - Connect a device such as a set-top box or satel-

lite receiver with Component Out.

4. HDMI In - This connector carries both video and audio signals.

Connect a HDMI-compatible device such as a set-top box or sat-

ellite receiver.

5. SCART In - this connector links directly to the screen, allowing

you to add a games console or other device that may not function

correctly when used with Windows Media Center. Use the

Source button on the remote control to access this connector.

The Component video, HDMI and SCART In ports (above)

may be accessed by pressing the Source button.

6. AV In - this SCART connector links to Windows Media Center,

allowing you to use a set-top box or similar device with the tools

provided by the operating system.

7. 'IR Blaster' remote control connector. An IR signal received by

the Smart TV32 may be transmitted to a set-top box or similar

device using an IR blaster cable. Use the adhesive pad on the IR

blaster cable to attach the end of the cable to the IR window on

the device, which may then be hidden or installed in another

location.

8. Power connector.

Do not unplug the Smart TV32 without first using the Master

Power Button (1) to completely power-down the Smart TV32.

You risk losing important data or damaging the Smart TV if you

unplug it while it is on or in Standby mode.

Quality of Connections

If you wish to use a connection to connect a device to the Smart TV,

you can use one of the following configurations (not included)

starting with the best (in terms of quality) in descending order:

1. HDMI

2. Component Video

3. SCART (RGB)

4. S-Video

5. Composite Video

To ensure good performance and reduced radiation interference,

Packard Bell recommends that you use a shielded cable with a fer-

rite clip when connecting any accessories to your product

(Firewire VCR, USB camera, etc.).

Andere Handbücher für Smart TV32

Inhaltsverzeichnis

Sprachen:

Andere Packard Bell Fernseher Handbücher

Packard Bell

Packard Bell Medi TV Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Philips

Philips Colour Television Bedienungsanleitung

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

Hitachi

Hitachi 32FX48B Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung