PackshotCreator PackshotSpin Bedienungsanleitung
QuickStart
PackshotSpin
Installation Manual
3 Meter USB cable
with signal amplier
Compatible digital camera PackshotSpin 360 software
USB turntable:
56 cm diameter
(PackshotSpin O6T)
USB turntable:
83 cm diameter
(PackshotSpin O9T)
USB cable (2 Pcs.)
Circular bases
(2 Pcs., white and black)
Turntable power lead Tripod
OR
PackshotSpin
Package Composition
System
requirements
OS: Windows® ME / 2000 / XP - SP1, Windows 7
(Administrator Account for 2000 and XP)
or Mac OS X 10.6
CPU: Pentium® or equiv. (1Ghz or higher preferred)
RAM: Min. 1 GB (1 GB preferred)
VGA: Min. 1024x768, True color
Monitor Type: CRT or LCD monitor
2 USB ports min., CD ROM Drive
Internet connection recommended
The turntable must be connected via a USB cable to the computer running the
PackshotSpin 360 software.
Insert the installation CD-Rom into your computer. During the installation, enter the
serial number of your product situated close to the USB and power outlet connections.
Follow the on-screen instructions until the installation is completed.
Step B
Step A
Adjust the legs of your turntable.
PackshotSpin 06T: Adjust all four legs to the desired height. Make sure the turntable is
stable then tighten the top screw against the bottom of the turntable to lock each leg.
PackshotSpin 09T: Due to its heavy weight, the PackshotSpin 09T turntable is equiped
with wheels to aid in transporting the turntable. To use the wheels, adjust the legs so
that they don’t touch the oor then lock each nut.
Step C
Install the circular bases on the platform:
PackshotSpin O6T: You may use the black or white circular bases included in your
package to customize your animations.
PackshotSpin 09T: The platform features concentric circles to assist you in placing
your items at the exact center of the turntable. You may also use the included circular
bases to customize your animations.
Step D
Depending on your product, you may also need to use the signal
amplier cable (Picture A). To do so, plug the power and USB cords
into the turntable (Picture B). Plug the other end of the power cord
into a power jack and the other end of the USB cord into a
computer USB port.
Switch the turntable on position “II” or “ON”. (Picture B)
Step E
Plug the digital camera into your computer using the appropriate USB cord. To install a
SLR camera, plug the lens on the camera body, and set the mode setting ring on ‘M’
(Manual exposure mode).
Step F
Launch the software and turn the camera on.
Picture A Picture B
Software
installation
PackshotSpin
installation
Place the computer near the turntable and the power outlet.
Note: there should be a power outlet with proper grounding nearby.
© Sysnext 2011. All rights reserved.
This material is not to be interpreted as a guarantee of earnings and may not be copied, reproducved, modified, published, uploaded,
posted or distributed in any way, without PackshotCreator’s prior consent.
Contacts:
PackshotCreator / Sysnext
7, rue Henri Rochefort
75017 Paris – France
T.: +33 (0)1 47 42 66 66
F.: +33 (0)1 47 42 66 67
For more information please contact www.packshot-creator.com
Taking pictures and
creating 360° animations
Troubleshooting
Recommended
installation composition
Once the software has been launched, you can preview your products in real time on
your screen and start taking pictures by using the camera control features (zoom, rotate,
crop, snap, etc.)
For animation creation, click on the 3D button. The 3D Creation Wizard will appear on the
screen. Select Create 3D Animation and follow the onscreen instructions.
See the PackshotSpin User Guide for additional information.
If the message “Cannot find 3D Turntable device”appears:
Confirm that the turntable is powered.
Make sure all USB cords are properly connected.
Check that the power switch on the turntable is in the “II” or“ON”position.
Close all active windows then re-launch the software and try again.
If the problem persists, try eliminating any device connected by USB or plug the USB cord into
a different port on your computer then try again.
Illustration : PackshotSpin O9T
Inhaltsverzeichnis
Andere PackshotCreator Kamerazubehör Handbücher
