pagertec FORESTAFF WATCH PAGING SYSTEM Bedienungsanleitung
FORESTAFF WATCH PAGING SYSTEM
USER GUIDE
Thank you for choosing Pagertec
Thank you for choosing Pagertec as your provider for your wireless paging
requirements. We greatly appreciate your confidence in our products. At Pagertec
our greatest commitment is providing you with total customer satisfaction. Please
take a few minutes to review this manual prior to installing and operating your
system. The manual will provide you with installation instructions, and offer
suggestions to ensure you receive all of the many benefits your system can provide.
Additionally, this manual will assist you with trouble shooting and offer helpful advice
when seeking customer service. We are confident Pagertec has the most responsive
customer service available within the industry. Please do not hesitate to contact our
Customer Care, if you have any questions. We look forward to a long and mutually
rewarding partnership.
Technical Specifications:
Input DC: 5V/1A
Work Frequency: 420~470Mhz
Code Format: POCSAG
Channel Spacing: 25Khz
Frequency Deviation: + 4.5Khz
Module: FSK
Baud Rate: 512/1200/2400bps
Capcode Capacity: 8
Display: 1.54” TN Color Display
Screen: Touch Screen
Alert by: Flash/Buzz/Vibrate
Weight: 4.9 OZ
Features:
●420-470Mhz wideband.
●An effective working range of 200 meters at open area.
●Rugged rubber wristband able to bear a 15kg pulling force
●Receiving Alphanumeric messages with 128 letters at max
●Pocsag messages auto-wrap.
●Selective PC or hand programmable
●Replaceable watch band
Know the Device:
●Main Menu
●Remove the wristband
System Settings
When entering the system setting you will be asked to input a password. By
default the password is “0000”.
●Date/Time
Enter a number which should be the total delayed/exceed seconds in the past 30
days when we see an image as Pic 1. For example, the clock is 2 seconds
behind one day, then we should input -60. On the contrary, if it is 2 seconds
beyond, 60 is required.
●Backlight Time
Enter the time in seconds for the screen to stay active. From 1 to 240 seconds.
After the allotted time has passed the screen will black out and not be usable
until activated again.
●Auto Clear Time
It refers to the seconds that POCSAG messages keep staying on the watch.
One page can display 3 lines, and those info. will keep displaying on the screen
until they are wiped out by users or the clear time is up.
●Alarm Clock
days when we see an image as Pic 1. For example, the clock is 2 seconds
behind one day, then we should input -60. On the contrary, if it is 2 seconds
beyond, 60 is required.
●Buzzer Volume
Buzzer volume can be regulated from grade 1 to grade 10 , the higher the
bigger.
●Prompt Mode
You can select the methods the watch will notify you of an incoming message.
Buzzer, Light and Vibrate options are available along with the amount of time it
will repeat each notification.
●Factory Reset
⚠ NOTICE: This will clear all previous programing.
●Do Not Disturb
⚠ NOTICE: by selecting “YES” the pager will no longer be able to receive
messages.
●About Me
Provides system and firmware information about your Forestaff Watch Pager.
POCSAG Settings:
●Frequency
Frequency bandwidth is 420Mhz ~ 470Mhz
●Baud Rate
They are optional with 512-1200-2400bps.
●Capcode 1 to Capcode 8
The watch can store a maximum of 8 capcodes at the same time. m.
Message:
A watch can store 30 messages, with one new message coming in, and
oldest messages will be replaced. One pocsag message can contain 128 characters.
Daily Care :
To prolong the service life of the product, we highly recommend implementing these tips
during daily use.
● The watch is designed to be IP51 water resistant, thus surface moisture won't
harm the system. Just wipe off moisture immediately with soft cloth such as a
lens cloth. However submerging in water will cause permanent damage and
invalidate the warranty.
● Regularly clean the touch screen with lens cloth.
● Watch will stop charging the battery when it is full. Unplugging the pager when
fully charged is highly recommended to prolong battery life.
● Do not alter the paging setting or open the watch without contacting our support
team.
Inhaltsverzeichnis
Andere pagertec Pager Handbücher
pagertec
pagertec TRACKSTAFF V3 Bedienungsanleitung
pagertec
pagertec TRACKSTAFF V3 Bedienungsanleitung
pagertec
pagertec Simple Alert Bedienungsanleitung
pagertec
pagertec Matrix Stand Alone Bedienungsanleitung
pagertec
pagertec Smart Stack EVO Bedienungsanleitung
pagertec
pagertec Wear and Go Bedienungsanleitung
Beliebte Pager Handbücher anderer Marken
Motorola
Motorola Talkabout T900 Bedienungsanleitung
Motorola
Motorola Advisor Graphix CP1250 Bedienungsanleitung
Radio Shack
Radio Shack 17-7040 Bedienungsanleitung
PageOne
PageOne Advisor Graphix Bedienungsanleitung
Syscall
Syscall Nttworks GP-210RT Bedienungsanleitung
unication
unication G4 Bedienungsanleitung