Pakedge Device & Software S8Mpdp Bedienungsanleitung

S8Mpdp Quick Start Guide

pakedgedevice&software inc.

QUICK START GUIDE

S8Mpdp

Enterprise-Class, 8-Port PoE Powered Priority Switch

S8Mpdp Quick Start Guide

Table of Contents

Introduction ...................................................................................................................................................... 3

Quick Switch Overview ...................................................................................................................................... 3

Preparing to Install the Switch ........................................................................................................................... 6

Installation ........................................................................................................................................................ 6

Configuration .................................................................................................................................................... 8

Configuring the Switch Using the Web Interface (Windows 7)........................................................................ 8

QoS Configuration ....................................................................................................................................... 11

Resetting The IP Address From Terminal...................................................................................................... 13

Troubleshooting & Support ............................................................................................................................. 14

S8Mpdp Quick Start Guide

Introduction

This guide has been written to allow you to get up and running quickly with the S8Mpdp Pakedge priority

switch keeping a few assumptions in mind:

a. You have a working knowledge of networking hardware configuration

b. You have a working knowledge of PC operations

Quick Switch Overview

The S8Mpdp is preconfigured for prioritization. It includes 8 10/100/1000 ports where port 1 can be used to

power the switch using PoE. You can either use a PoE injector or another PoE switch to power the S8Mpdp.

Additionally, it includes 1 Gigabit SFP interface and a console interface. The features of the standard ports are

shown in Table 1.

Port name

Features

Giga Ethernet

interfaces

Speed: 10/100/1000M auto-sense; cable: MDI/MDIX, UTP (RJ45)

interface with LINK/ACT, 1000 Mbps indicator

SPF

Speed: 10/100/1000M auto-sense; cable: Fiber Optic

Console interface

Speed: 38400bps, RJ45 interface

Table 1: Switch Port Features

The Front Panel of the S8Mpdp (shown in Figure 1) has several LEDs displaying the status of the switch ports.

Figure 1 –S8Mpdp front panel

Label

Function

Description

1000M

Speed Indicator of Gigabit port

Indicator is lit only when the port is operating in

1000M.

Link/Act

Valid connection indicator

Steady blue: Valid port connection

Blinking blue: Valid port connection and data

transmit/receive

Off: Media disconnected.

Table 2: LED Descriptions

S8Mpdp Quick Start Guide

The rear panel (Figure 2) is where the ports and other equipment connections are located. Table 3 describes

each port and its function.

Figure 2: Rear Panel of the S8Mpdp

Name

Explanation

DC connector

12V/1A

8 10/100/1000M

Ports

Implement 10/100/1000M Ethernet signal transformation. Port 1

is used to power the switch using PoE.

1 SFP Port

Implements 10/100/1000M Fiber connection using a GBIC

Console

Implements switch management using a console cable

Reset

Resets switch to factory defaults.

Table 3: Description of the Rear Panel of the S8Mpdp from left to right

S8Mpdp Quick Start Guide

The following illustrates the priority configuration on the S8Mpdp.

The S8Mpdp ensures Quality of Service (QoS) by prioritizing traffic by port.

Port 1 will be used as an uplink port

Devices connected to ports 2-3 will have high priority

Devices connected to ports 4-5 will have medium priority

Devices connected to ports 6-7 will have normal priority

Device(s) connected to port 8 will have low priority

If additional ports/switches are needed they can be connected into the S8Mpdp so quality of

service is not bypassed.

S8Mpdp Quick Start Guide

Preparing to Install the Switch

Tools Required:

PC or Laptop with Ethernet Interface (an integrated DB-9 port or USB to Serial adapter may be

necessary if you would like to use the console interface)

Ethernet Cable (RJ45 Cable)

Phillips Screwdriver (if using Rack-mount Brackets)

Installation

1. Open Box and Remove Unit.

a. OPTIONAL: If mounting the switch in a standard 19” AV rack, attach the rack mounting

brackets, included with the S8Mpd, to the sides of the unit. The switch can also be

mounted to the wall using the same included rack mounts. See images below.

S8Mpdp Quick Start Guide

b. Physically mount the S8Mpdp switch near the power and network connections (i.e.

backbone switch, firewall/router or behind a TV)

2. Connect the S8Mpdp to a power source

3. Connect your computer to any of the available ports on the S8Mpdp.

4. Configure the switch to an IP address that matches your network. Configuration process is

described in the following sections.

S8Mpdp Quick Start Guide

Configuration

There are two ways to complete the initial configuration of the S8Mpdp switch:

Using the standard IP address and a web browser

Using a console cable and a terminal emulation program such as PuTTY or HyperTerminal.

Configuring the Switch Using the Web Interface (Windows 7)

1. First you need to configure the PC with IP address 192.168.1.10, and subnet mask

255.255.255.0, by going to the Windows Control Panel, double-clicking Network

Connections and double-clicking the connection of your Network Interface Card (NIC). The

Local Area Connection Properties dialog appears:

Figure 3: Local Area Connection Properties

S8Mpdp Quick Start Guide

2. Select Internet Protocol Version 4 (TCP/IPv4)and click Properties. The Internet Protocol (TCP/IP)

dialog appears where you can configure the TCP/IP settings of your PC.

Figure 4: TCP/IP Properties

3. Select “Use the following IP Address”and manually type in the IP address and subnet mask

into the provided boxes, as in the example above. (Be sure the IP address and subnet mask

are on the same subnet as the S8Mpdp).

4. Click OK to close the dialog then click OK to close the Local Area Connection Properties

dialog.

5. Now open a web browser (Internet Explorer, Firefox and Chrome browsers all work for

configuring the S8Mpd, but Firefox is preferred)

6. Enter the switch’s default IP address: 192.168.1.200 into the Address Bar and press

<ENTER>.

7. The default password is pakedgep. Enter the password and click “Apply” to be logged into

the web administration portal.

S8Mpdp Quick Start Guide

8. In the web administration portal, you will be able to configure, update and reset the S8Mpd.

Figure 5: S8Mpdp Web Interface

PLEASE NOTE: Once you have logged in, you may use the web interface (Figure 5) to configure the switch

and customize it for your environment. You may also refer to the complete product manual on our website

for advanced configurations.

Inhaltsverzeichnis

Andere Pakedge Device & Software Schalten Handbücher

Pakedge Device & Software

Pakedge Device & Software SW24-GBP Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SE-USB1-EP Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software S18e Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SW16-8PB Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SE-8P Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SE-5P2-EP Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SE-18 Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SE-8P4 Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SK24 Bedienungsanleitung

Pakedge Device & Software

Pakedge Device & Software SE-8P2-EP Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung