1010
9 Plug an Ethernet cable into the WX-1, then press the hinge arms towards the center of the
AP bracket.
10 While holding the hinge
arms inward, insert the AP
bracket/WX-1 assembly into the
in-ceiling bracket.
11 Align the hinge pins on the hinge arms
with the hinge mounting holes on the in-ceiling bracket, then release the hinge arms.
Make sure that the hinge pins are fully inserted into the hinge mounting holes and the AP
bracket/WX-1 assembly is able to swing freely.
1
1
2
Hinge
mounting
hole
Hinge mounting hole
Hinge pin
Hinge pin
