Palsonic TFTV435 Bedienungsanleitung
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
43CM CORDLESS REMOTE LCD TV/MONITOR
MODEL: TFTV435
OWNER'S MANUAL
N111
Congratulation on your purchase of this LCD TV
We recommend that you read this manual thoroughly before use to fully enjoy
the many functions and excellent features of this unit.
Keep this manual in an easily accessible location for future reference.
Note: Screen displays and illustrations in this manual may differ from the actual
model.
Contents Index
Important Safety Cautions .....................
Identification of controls ........................
Control buttons .....................................
Back ........... .........................................
Remote control ........................................
Installation ...............................................
Basic operations .....................................
Main OSD introduction ...........................
Operations ...............................................
Channel Setting ....................................
1
4
4
5
6
8
5
16
17
17
Selecting channel ..................................
Picture adjustment ................................
Audio Setting .........................................
System Setting ......................................
OSD Setting, .........................................
Timer setting .........................................
Operations in RGB/YPbPr mode ............
Troubleshooting ......................................
Specifications ..........................................
20
21
22
23
24
25
26
28
29
Important Safety Cautions
1
When any unusual situation occurs, turn off the power supply at once and
remove the plug from the wall outlet. Contact a qualified service department
in your local area.
Water and moisture - Do not use this product near water - for example, near a
bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool, and the like. Do not use immediately after moving from a low
temperature to high temperature environment, as this causes condensation,
which may result in fire, electric shock, or other hazards.
Heat sources - Keep the product away from heat sources such as radiators
heaters, stoves other heat generating products (including amplifiers).
requirement of environment temperature;
00C~500C for storage; 50C~400C for working.
The vents and other openings in the cabinet are designed for ventilation. Do not
cover or block these vents and openings since insufficient ventilation can cause
overheating and/or shorten the life of the product.
Do not place the product on a bed, sofa, rug or other similar surface, since they
can block ventilation openings.
This product is not designed for built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless proper ventilation is provided
or the the manufacturer's instructions are followed.
Unplug this product from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not place the product on an unstable trolley, stand, tripod or table. Placing
the product on an unstable base can cause the product to fall, resulting in
serious personal injuries as well as damage to the product. Use only a trolley,
stand, tripod, and bracket or table recommended by the manufacturer or sold with
the product.
2
When relocating the product placed on a trolley, it must be moved with the utmost
care. Sudden stops, excessive force and uneven floor surfaces can cause the
product to fall from the trolley.
The power cords must be routed properly to prevent people from stepping on
them or objects from resting on them. Check the cords at the plugs and product.
Power supply cords should be routed so that they are not likely to be walked on
or snagged by items placed upon or against them. Pay particular attention to cords
at doors, plugs, receptacles, and the point where they exit from the product.
If the power cord or the plug is damaged contact a qualified service department
for service.
Do not overload wall outlets, extension cords, or convenience receptacles on
other equipment as this can result in a risk of fire or electric shock.
High Voltage exists in this TV set. Do not remove the cover.
In case the product needs replacement parts, make sure that the service person
uses replacement parts specified by the manufacturer, or those with the same
characteristics and performance as the original parts. Use of unauthorised parts
can result in fire, electric shock and/or other danger.
The LCD panel used in this product is made of glass. Therefore, it can break
when the product is dropped or impacted upon by other objects. Be careful not
to be injured by broken glass pieces in case the LCD panel breaks.
Don't try to push anything into the cabinet or place any vessel with water on the
TV set.
For added protection for this television equipment during a lightning storm, or
when it is left unattended and unused for long periods of time, unplug it from the
wall outlet and disconnect the antenna. This will prevent damage to the equipment
due to lightning and power-line surges.
Important Safety Cautions
Important Safety Cautions
3
Important Information Regarding use of Video
images displays
The extended use of a fixed image program material can cause permanent "Shadow Image" on the
LCD panel. The background image is viewable on normal programs in the form of stationary fixed
images. This type of irreversible LCD panel deterioration can be limited by observing the following
steps:
* Reduce the Brightness and Contrast settings to a minimum viewing level.
* DO NOT display the fixed image for extended periods of time.
* Turn the power OFF when not in actual use.
Recycling
This product utilises tin-lead solder, and has a fluorescent lamp containing a small amount of
mercury. Disposal of these materials may be regulated in your community due to environmental
considerations. For disposal or recycling information please contact your local authorities.
Games, Computer, captions or other fixed
Identification of controls
4
1. SOURCE
To access the SOURCE select menu
2. MENU
Press this button to access the MENU main page.
3. CH +/-
Change the TV channel.
In OSD Menu, press these buttons to choose the OSD items.
4. VOL +/-
Increase or decrease the sound volume level.
In OSD Menu, press these buttons to adjust the value or setting of each item.
5. POWER ( )
Press this button to turn the unit ON from STANDBY mode. Press it again to turn the set back to
STANDBY.
The Power Indicator light will glow
yellow when the set is turned on,
and glows red when the set is in
the standby mode.
Note:
SOURCE, MENU, CH+/-, VOL+/- and POWER ( ) on the main unit have the same functions as the
corresponding buttons on the remote control.
This operation manual provides a description based on operating functions with the remote control.
Identification of controls (continued)
5
1. DC POWER input
Connect to the DC output of the Power Adapter
2. VGA input / PC- Audio in.
Connect to the VGA/audio output 3.5mm jacks on your PC.
3. HDTV input (Y, Pb, Pr, Audio L, R)
Connect to the Y/Pb/Pr (or Y/Cb/Cr) and audio output jacks of a Set-Top Box or DVD player.
4. Headphone 3.5mm jack
5. AV outputs (Video, Audio L, R)
Connect to the VCR input jacks to record programs.
6. AV inputs (Video, Audio L, R)
Receive video/audio signals from external sources such as VCR or DVD player.
7. S-Video input
Receive a S-Video signal from external source such as VCR or DVD player.
8. Coaxial cable & Antenna input
Remote Control
6
S.MODE
Bass+
Bass - Treb-
Treb+
OSD
POSITION
POWER
CH
CH
VOL VOL
+
-
P.M
AUTO.ADJ
DSP
0
8
7
45
123
6
9
-/--
MENU
C.SYS
ZOOM
CLK SLP
EXIT
Power on/standby Mute
Volume up/down selector;
In the menu operation,
adjust the selected item
Channel up/down selector.
In menu operations, used
to select item.
Access the menu Exit the menu
Colour system select Setting sleep timer
Zoom mode selection Clock setting
Auto correct picture Previous channel
Select picture mode between
Bright, Nature, Soft & User Display the current state
Direct channel selector
Select the input signal source
Select OSD menu position
Sound mode selection Adjust the treble
Adjust the bass
Flip the cover, open in
the arrow direction.
Preparing the Remote Control
7
Effective range of the remote control
Please install the batteries before using the remote control.
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
1Open the battery cover. 2. Insert two size-AAA batteries Replace the cover and
slide in reverse until the
lock snaps.
(Slide the cover while
pressing down.) (Place the batteries with their
terminals corresponding to the (+
and (-) indications in the battery)
compartment.)
Notes:
1.
2.
3.
4.
5.
6.
7.
8.
When the remote control will not be used for a
long period of time or when the batteries are
worn out, remove the batteries.
Do not drop or dampen the remote control.
Do not disassemble the remote control.
There should be no obstacle between the TV
and the transmitter.
Use the remote control within the effective
range as shown in the figure on the left.
If the remote control does not work, please
check whether the batteries are exhausted or
if they have been installed properly.
When direct sunlight, and incandescent
lighting, fluorescent lamp or any other strong
light shines on the remote sensor of the TV,
the remote operation can be come erratic.
Do not mix different types of batteries in the
remote.
3
Installation
8
Install the unit in a room where direct light will not fall upon the screen.
Total darkness or a reflection on the picture screen may cause
eyestrain. Soft and indirect lighting is recommended for comfortable
viewing.
Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be
used. The exact type and position of the aerial will depend upon your particular area.
Note:
It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may
occur due to radio wave conditions.
The aerial cable should not be bundled with the power cord and the like.
RF
Antenna connection
Inhaltsverzeichnis
Andere Palsonic LCD-Fernseher Handbücher
Palsonic
Palsonic TFTV836BK Bedienungsanleitung
Palsonic
Palsonic TFTV385HD Bedienungsanleitung
Palsonic
Palsonic TFTV4200FHD Bedienungsanleitung
Palsonic
Palsonic TFTV388HD Bedienungsanleitung
Palsonic
Palsonic TFTV558HD Bedienungsanleitung
Palsonic
Palsonic TFTV664R Bedienungsanleitung
Palsonic
Palsonic HDMI TFTV812A Bedienungsanleitung
Palsonic
Palsonic TFTV8153DT Bedienungsanleitung
Palsonic
Palsonic TFTV818HD Bedienungsanleitung
Palsonic
Palsonic TFTV-760 Bedienungsanleitung
Palsonic
Palsonic TFTV385YM Bedienungsanleitung
Palsonic
Palsonic TFTV1720D Bedienungsanleitung
Palsonic
Palsonic TFTV602LED Bedienungsanleitung
Palsonic
Palsonic TFTV765 Bedienungsanleitung
Palsonic
Palsonic TFTV322FHD Bedienungsanleitung
Palsonic
Palsonic TFTV683HD Bedienungsanleitung
Palsonic
Palsonic TFTV835HD Bedienungsanleitung
Palsonic
Palsonic TFTV382HD Bedienungsanleitung
Palsonic
Palsonic TFTV421FHD Bedienungsanleitung
Palsonic
Palsonic TFTV605FHD Bedienungsanleitung
