Pg. 7
Note: In some models the lock screen shows “Emergency”, it
means that you’re out of network coverage (service coverage)
or your card is not valid, yet you can still make emergency
calls based on signal strength.
1.5 Charging the Battery
To charge the battery, plug in the charger connector to your
phone (USB interface) and then plug the other line end into an
AC power socket.
The battery icon indicates the charging state. While charging,
the charging indicator icon on the top of the phone lights up.
Note: If the battery is on zero power, the battery icon will
reappear after a few minutes of charging.
1.6 Connect phone with PC
Once phone is connected to a PC via USB cable, the below
screen (options may differe in varying models) will appear:
You can now exchange/manage data between your phone
and PC.
Once nished, for USB storage mode, click again
“Turn off USB storage” to unmount storage from computer.
For other mode, just eject the USB cable.
2 BASIC FUNCTIONS
2.1 Make calls
When the network provider icon appears on the standby
screen, you can make or answer calls. The indicator on the
upper right part shows the signal strength.
Quality of connection will be greatly inuenced by obstructions.
So movement in a small range may effectively improve the
quality of connection.
2.2 Make Domestic Calls
Use virtual keyboard (dialer screen) to enter phone numbers
and then press Dial icon to call. If you need to change the
phone number, please press the delete key on the touch screen
to erase. When the call is answered, the screen shall show the
connection status.
2.3 Call Extension Phone
Some of the extension calls can’t be connected directly. Use
the virtual keyboard during in-call and enter switchboard
number. Open the option menu and choose “Add 2-sec
pause”, and then dial the extension phone number.
Type in as follows to call extension phone:
Zone description > switchboard number > Add 2-sec pause>
extension phone number › call
2.4 Make International Calls
If you need to make an international call, do a long press on the
0 key on the virtual keyboard until the “+” sign appears, then
add country code followed by area code prex.
You can make an international call according to the following
typing order: + › country code › complete phone number ›
dialing icon (type in the prex code, and then continue to
enter the country code and complete phone number). Country
code usually follows conventional practice: Bangladesh is 88,
Germany is 49, UK 44, Sweden 46 and so on.
When making international phone calls, the “0” in the city code
should be omitted, depending on country code and system.
2.5 Make Listed Calls
Every dialed and received phone number is recorded in the call
log list. Recently dialed, answered and missed phone numbers
