Panasonic TY-ER3D6ME Bedienungsanleitung

Operating Instructions

3D Eyewear

Model No. TY-ER3D6ME

This product cannot and must not be used

as sunglasses.

ENGLISH

DANSK

NEDERLANDS

FRANÇAIS

DEUTSCH

ITALIANO

ҚАЗАҚ

PORTUGUÊS

РУССКИЙ

ESPAÑOL

SVENSKA

УКРАЇНСЬКА

GUARANTEE

ГАРАНТИЙНЫЙ ТАЛОН

TÜRKÇE

TQZJ737-1

ENGLISH

Thank you for purchasing a Panasonic product.

Before operating this product, please read the instructions

carefully, and save this manual for future use.

Before using this product, be sure to read “Safety

Precautions” and “Using Precautions” ( pages 2 - 6).

This 3D Eyewear can be used for Panasonic HDTVs

supporting 3D and the Bluetooth

Wireless technology.

For the latest information on applicable models, visit

our web site.

http://panasonic.net/viera/support

Safety Precautions

Warning

About Prohibited Place

 Do not use 3D Eyewear in hospital or other medical

facilities.

Radio waves from 3D Eyewear may cause interference of medical

equipments.

 Do not use 3D Eyewear nearby automatic control

equipments, like a automatic door, a ﬁre alarm

apparatus, etc.

Radio waves from 3D Eyewear may cause interference of automatic

control equipments.

 Keep 3D Eyewear more than 15 cm away from the

implant of cardiac pacemaker, or similar implantable

medical equipments, at all times.

Radio waves from 3D Eyewear may affect implantable cardiac

pacemaker or similar equipment operations.

Accidental Ingestion

 Do not ingest battery, chemical burn hazard.

This product contains a coin/button cell battery. It can cause severe

internal burns in just two hours if swallowed, which can lead to life

threatening injury, including death.

Keep new and used batteries away from children. If the battery

compartment does not close securely, stop using the product and

keep it away from children.

If you think batteries might have been swallowed or placed inside any

part of the body, seek immediate medical attention.

Disassembly

 Do not disassemble or modify the 3D Eyewear.

ENGLISH

Caution

Battery

 Incorrect installation may cause battery leakage,

corrosion and explosion.

 Replace only with the same or equivalent type.

 Do not use rechargeable battery (Ni-Cd, etc.).

 Do not burn or break up battery.

 Do not expose battery to excessive heat such as

sunshine, ﬁre or the like.

 Make sure you dispose of battery correctly.

 Remove the battery from the unit when not using

for a prolonged period of time to prevent battery

leakage, corrosion and explosion.

About 3D Eyewear

 Do not drop, exert pressure on, or step on the

3D Eyewear.

 Be careful of the tips of the frame when putting on

the 3D Eyewear.

 Always keep the 3D Eyewear in a cool, dry place.

 Be careful not to trap a ﬁnger in the hinge section of

the 3D Eyewear.

 Pay special attention when children are using this

product.

Viewing 3D Content

 Do not use the 3D Eyewear if you have a history of

over-sensitivity to light, heart problems, or have any

other existing medical conditions.

 Stop using the 3D Eyewear immediately if you

feel tired, discomfort, or any other uncomfortable

sensation.

 Take an appropriate break after viewing a 3D

movie.

 Take a break of between 30 - 60 minutes after

viewing 3D content on interactive devices such as

3D games or computers.

(continued overleaf)

ENGLISH

 Be careful not to strike the television screen or other

people unintentionally. When using the 3D Eyewear

the distance between the user and screen can be

misjudged.

 The 3D Eyewear must only be worn when viewing

3D content.

 Do not tilt your head and/or the 3D Eyewear

while viewing 3D image. Keep your eyes and

the 3D Eyewear are on a horizontal level to the

television.

 If you suffer from any eyesight problems (short/

far-sighted, astigmatism, eyesight differences in

left and right), please ensure to correct your vision

before using the 3D Eyewear.

 Stop using the 3D Eyewear if you can clearly see

double images when viewing 3D content.

 Do not use the 3D Eyewear at a distance less than

the recommended distance.

The recommended viewing distance is at least

3 times of image height.

e.g.

For a 40-inch TV 1.5 m or more

For a 42-inch TV 1.6 m or more

For a 47-inch TV 1.8 m or more

For a 48-inch TV 1.8 m or more

For a 50-inch TV 1.9 m or more

For a 55-inch TV 2.1 m or more

For a 58-inch TV 2.2 m or more

For a 60-inch TV 2.3 m or more

For a 65-inch TV 2.4 m or more

 When the top and bottom area of the screen is

blackened, such as movies, view the screen at a

distance at least 3 times of the height of the actual

image.

(That makes the distance closer than above

recommended ﬁgure.)

3D Eyewear Use

 3D Eyewear should not be used by children younger

than 5 - 6 years old, as a guideline.

 All children must be fully supervised by parents or

guardians who must ensure their safety and health

throughout the using 3D Eyewear.

 Before using the 3D Eyewear, ensure no breakable

objects surrounding the user to avoid any accidental

damage or injury.

ENGLISH

 Remove the 3D Eyewear before moving around to

avoid falling or accidental injury.

 Use the 3D Eyewear only for the intended purpose

and nothing else.

 Do not use if the 3D Eyewear is physically

damaged.

 Stop using the 3D Eyewear immediately if a

malfunction or fault occurs.

 Stop using the 3D Eyewear immediately if you

experience any redness, pain, or skin irritation

around the nose or temples.

 In rare cases, the materials used in the 3D Eyewear

may cause an allergic reaction.

Using Precautions

 Do not drop or bend the 3D Eyewear.

 Do not apply pressure to or scratch the surface of

the liquid crystal shutter of the 3D Eyewear.

 Do not use devices (such as mobile phones

or personal transceivers) that emit strong

electromagnetic waves near the 3D Eyewear as this

may cause the 3D Eyewear to malfunction.

 Do not use 3D Eyewear outside the speciﬁed usage

temperature range ( page 14).

 If the room is lit by ﬂuorescent lights (50 Hz) and

light appears to ﬂicker when using the 3D Eyewear,

switch off the ﬂuorescent light.

 3D content will not be correctly visible if the

3D Eyewear is worn upside down or back-to-front.

 Do not wear the 3D Eyewear when watching

anything other than 3D images. Other kinds of

displays (such as computer screens, digital clocks,

or calculators etc.) may be difﬁcult to see while

wearing the 3D Eyewear.

 Using radio waves

This unit uses the 2.4 GHz radio frequency

ISM band (Bluetooth®). However other wireless

equipment may use the same frequency. Be sure

to take note of the following to prevent radio wave

interference from other equipment.

●Restriction of use

For use only in your country.

(continued overleaf)

ENGLISH

●Range of use

The range of use is up to approximately 3.2 m.

The range may be less depending on the

structure of the building, the environment

and any obstacles between the receiver and

the transmitter. Such obstacles as reinforced

concrete walls and metal doors, in particular,

obstruct the transmitter’s signals.

●Interference from other equipment

Due to radio interference, malfunctions may occur

if the unit is placed too close to other equipment.

We recommend keeping the unit as far away as

possible from the following devices:

Bluetooth®devices other than this unit, wireless

LAN, microwaves, ofﬁce automation devices,

digital cordless telephones and other electronic

devices.

The unit is designed to automatically avoid radio

interference from these household devices.

However malfunctions may happen when radio

interference occurs.

ENGLISH

Identifying Controls

(Part No.: TY-ER3D6MA)

Power button / Mode change

Power button Press and hold for approx. 1 second to turn

the 3D Eyewear on. (The indicator lamp

lights for 2 seconds.) Press and hold for

3 seconds or more to turn the 3D Eyewear

off. (The indicator lamp lights 3 times.)

Mode change Press and hold for approx. 1 second to

change the mode between 3D and 2D (view

a 3D image in 2D). When power is off,

press and hold for approx. 5 seconds to

change to registration mode. For details on

registration, refer to the Registration page.

(page 9)

Indicator lamp

Lights or ﬂashes during use to show the status.

(continued overleaf)

ENGLISH

 Indicator lamp status

Indicator lamp Status

Lights red for 2 seconds

when turned on

Sufﬁcient battery level

Flashes red 5 times when

turned on

Low battery level

Flashes red Under registration

Flashes red once every

1 second

Under reconnecting to the

Flashes red 3 times Power off (Press and hold

for more than 3 seconds

when in use, or automatically

power off when registering /

reconnecting fails, or

connection is lost.)

Flashes red once every

2 seconds when in use

3D mode is selected

Flashes red twice every

4 seconds when in use

2D mode is selected

ENGLISH

Registration

 First Registration

Perform the First Registration when the 3D Eyewear is

used for the ﬁrst time.

1. Turn on the TV to see.

2. Press Power button for about 1 second to turn the 3D

Eyewear on.

The lamp lights for about 2 seconds and then ﬂashes.

The 3D Eyewear will power on and start registration.

Place the 3D Eyewear within 50 cm from the TV while

registration in progress.

3. After the registration is successfully completed, the 3D

Eyewear will reconnect with TV automatically when the 3D

Eyewear is turned on near the TV in 3D mode.

 Registration Again

When connection with registered TV fails, or when using

with another TV,re-register the 3D Eyewear.

1. Turn on the TV to see.

2. Within 50 cm from the TV, press Power button until lamp

lights, then release it to start registration.

3. After the registration is successfully completed, the 3D

Eyewear will reconnect with TV automatically when the 3D

Eyewear is turned on near the TV in 3D mode.

* If the registration failed, the 3D Eyewear will power off.

In this case, power off the TV and perform from step 1.

ENGLISH

Storage and Cleaning

Clean using a soft, dry cloth.

Wiping the 3D Eyewear with a soft cloth that is covered in

dust or dirt may scratch the eyewear. Shake off any dust

from the cloth before use.

Do not use benzene, thinner, or wax on the 3D Eyewear,

as doing so may cause the paint to peel off.

Do not dunk the 3D Eyewear in liquid such as water when

cleaning.

Avoid storing the 3D Eyewear in hot or highly humid

locations.

As the liquid crystal shutters (lens) are fragile and easily

broken, be very careful when cleaning them.

Andere Handbücher für TY-ER3D6ME

Inhaltsverzeichnis

Andere Panasonic 3D-Brille Handbücher

Panasonic

Panasonic TY-ER3D4MU Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LE Bedienungsanleitung

Panasonic

Panasonic TY-EP3D20E Bedienungsanleitung

Panasonic

Panasonic TY-EW3D10W Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LU Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LE Bedienungsanleitung

Panasonic

Panasonic TY-ER3D4MA Bedienungsanleitung

Panasonic

Panasonic TY-EW3D10E Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LE Bedienungsanleitung

Panasonic

Panasonic TY-ER3D4MU Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LW Bedienungsanleitung

Panasonic

Panasonic TY-ER3D5MA Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LW Bedienungsanleitung

Panasonic

Panasonic BT-PGL10G Bedienungsanleitung

Panasonic

Panasonic TY-EP3D10EB Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LU Bedienungsanleitung

Panasonic

Panasonic TY-EW3D10E Referenzhandbuch

Panasonic

Panasonic TY-EW3D3LW Bedienungsanleitung

Panasonic

Panasonic TY-EW3D10U Bedienungsanleitung

Panasonic

Panasonic TY-ER3D4MU Bedienungsanleitung

Panasonic

Panasonic TY-ER3D5MW Bedienungsanleitung

Panasonic

Panasonic TY-ER3D4ME Bedienungsanleitung

Panasonic

Panasonic TY-ER3D4SW Bedienungsanleitung

Panasonic

Panasonic TY-EW3D3LE Bedienungsanleitung

Beliebte 3D-Brille Handbücher anderer Marken

Sony

Sony BKM-30G Bedienungsanleitung

Samsung

Samsung Gear VR SM-R322 Bedienungsanleitung

Segula

Segula 50546 Bedienungsanleitung

LG 360 VR Bedienungsanleitung

Wicked3D

Wicked3D eyeSCREAM Bedienungsanleitung

Eyedaptic

Eyedaptic EYE5 Bedienungsanleitung

Silhouette

Silhouette TITAN DESIGN Montageanleitung

Soundcore

Soundcore Frames Bedienungsanleitung

Wiseup

Wiseup GL2000 Bedienungsanleitung

Eschenbach

Eschenbach MaxTV Bedienungsanleitung

Mini Gadgets

Mini Gadgets GLSun720 Bedienungsanleitung

Happy Electronics

Happy Electronics Mindroid Glasses Bedienungsanleitung

BASETech

BASETech 1456965 Bedienungsanleitung

YEAZ

YEAZ SUNUP Bedienungsanleitung

Dimensional Optics

Dimensional Optics Active 3D Bedienungsanleitung

xelux

xelux Smartglass I3 LED Bedienungsanleitung

Cyclopital3D

Cyclopital3D HD3D View-Vaster Bedienungsanleitung

Rollei

Rollei Sunglasses Cam 100 Bedienungsanleitung