Panasonic AJ-D400P Bedienungsanleitung

ORDER NO. VSD9903M004A

D20

DVCPRO Camera Recorde

AJ-D400P/E

Sec.1 Operating Instructions

Sec.2 Service Information

Sec.3 Maintenance / Disassembly Procedures

& Mechanical Adjustment

Sec.4 Electrical Adjustment

Sec.5 Block Diagrams

Unauthorized copying and distribution is a violation of law.

Vol.1

Please refer to the Service Manual Volume2 (Order No. VSD9903M004B) for Schematic

Diagrams, Circuit Board diagrams and Exploded Views & Parts List.

Printed in Japan

F37309903NCKD222

SERVICE INFORMATION

CONTENTS

Setting Menu.........................................................................................2-1

1. Service Menu................................................................................2-2

How to open the Service Menu......................................................2-2

SERVICE ADJ MENU SCREEN ................................................2-2

VTR D/A DATA MENU SCREEN................................................2-3

BATTERY SETTING MENU SCREEN.......................................2-4

WHITE SHADING MENU SCREEN...........................................2-5

2. Design Menu Screen ....................................................................2-6

How to reset the HOUR METER....................................................2-7

HOUR METER RESET MENU SCREEN...................................2-7

SBC OPTION MENU SCREEN..................................................2-8

3. Option Menu Screen.....................................................................2-9

How open the Option Menu...........................................................2-9

Auto off Information.........................................................................2-10

Setting Menu

This unit have some kinds of setting menus, which are User, Engineer, Service, Design and Option. With operation

of User and Engineer menu, please refer to documentation on Operation Instructions. In case of open the Service or

Design menu, User and Engineer menu screen also can be selected as shown as below table. In case of open the

Option menu, displayed option menu screen only.

<Table of Setting Menu> User En

ineer Service Desi

nOption

MAKER ¡¡¡¡

VF DISPLAY ¡¡¡¡

CAMERA ID ¡¡¡¡

SHUTTER SPEED ¡¡¡

SYNCRO SCAN ¡¡¡¡

! LED ¡¡¡

SET UP CARD (AJ-D700 only) ¡¡¡¡

MAIN FUNCTION ¡¡¡¡

BATT/TAPE ARARM ¡¡¡

FUNCTION 1/5 ¡¡¡

FUNCTION 2/5 ¡¡¡

FUNCTION 3/5 ¡¡¡

FUNCTION 4/5 ¡¡¡

FUNCTION 5/5 ¡¡¡

TIME/DATE ¡¡¡

LOW SETTING ¡¡¡

MID SETTING ¡¡¡

HIGH SETTING ¡¡¡

LEVEL 1/6 ¡¡¡

LEVEL 2/6 ¡¡¡

LEVEL 3/6 ¡¡¡

LEVEL 4/6 ¡¡¡

LEVEL 5/6 ¡¡¡

LEVEL 6/6 ¡¡¡

VF OPERATION ¡¡¡

LENS ADJ ¡¡¡

MENU SELECT 1/3 ¡¡¡

MENU SELECT 2/3 ¡¡¡

MENU SELECT 3/3 ¡¡¡

AUTO SHADING ¡¡¡

DATA RESET ¡¡¡

SERVICE ADJ ¡¡

VTR D/A DATA ¡¡

DESIGN ¡

DIAGNOSTIC ¡¡¡

HOUR METER RESET ¡

SBC OPTION ¡

BATTERY SETTING ¡¡

WHITE SHADING ¡¡

OPTION MENU ¡

1. Service Menu.

< How to open the Service Menu >

Press SHIFT , UP and DOWN button on the Right Side Panel simultaneously, then set Menu switch to SET side

for open the Service Menu.

How to change the setting on each item, how to select the item, how to Page up and down, which are exactly same

method as User and Engineer menu.

Service menu has 4 kinds of menu screens. And basically Service menu allows service personal to service this

model. Adjustment procedures give a detail of how to use.

[ SERVICE ADJ MENU SCREEN ]

SERVICE ADJ

GAMMA(SERV) : ON

R GAMMA(SERV) : -----

B GAMMA(SERV) : -----

TEST PULSE : OFF

ECU CONNECT : ECU

CONCEAL : ON

INNER ECC : ON

OUTER ECC : ON

IF ADJ : OFF

SERVO MODE : ATF

This menu sets the modes for servicing

ITEM RANGE PRESET REMARK

GAMMA (SERV) ON/OFF ON GAMMA setting become effective.

R GAMMA (SERV) -10 ~ +10 Setting of Rch GAMMA.

B GAMMA (SERV) -10 ~ +10 Setting of Bch GAMMA.

TEST PULSE ON/OFF OFF TEST PULSE becomes available.

ECU CONNECT ECU/EVR ECU ECU: Connection with ECU connector.

EVR: Connection with EVR connector.

CONCEAL ON/OFF ON

INNER ECC ON/OFF ON

OUT ECC ON/OFF ON

IF ADJ ON/OFF OFF Turn ON when adjusting VTR I/F.

SERVO MODE ATF/CTL ATF Selection of SERVO MODE.

[ VTR D/A DATA MENU SCREEN ]

VTR D/A DATA

(01) 98 (02) 78 (03) 7C (04) E4

(05) 00 (06) 00 (07) 8F (08) 96

(09) 3F (0A) 40 (0B) 6D (0C)55

(0D)41 (0E) B1 (0F) 8F (10) A0

(11) 71 (12) 5E (13) 60 (14) 00

(15) 00 (16) 00 (17) 00 (18) 00

(19) D0 (1A) 8D (1B) 74 (1C)9C

(1D)FF (1E) 88 (1F) 85 (20) D4

(21) B8 (22) 00 (23) 00 (24) FF

The data, which are adjusted by EVR, are displayed.

Address Adjustment P.C.Board Address Adjustment P.C.Board

(01) SYNC_LEVEL V_MAIN (13) Pr_CLAMP_DC V_I/F

(02) Y_LEVEL V_MAIN (14) TEST_4 V_I/F

(03) C_LEVEL V_MAIN (15) TEST_3 V_I/F

(04) FS_12 V_MAIN (16) C_LEVEL V_I/F

(05) ------- ------ (17) Y_LEVEL V_I/F

(06) ------ ------ (18) ------ ------

(07) EQ_A_L RF (19) HUE V_I/F

(08) EQ_A_R RF (1A) OUT_BIAS V_I/F

(09) EQ_B_L RF (1B) PLL_POSITION V_I/F

(0A) EQ_B_R RF (1C) APC V_I/F

(0B) PLL_VCO RF (1D) NOT_ADJ_L V_I/F

(0C) ATF_GAIN RF (1E) REC_FREQ_L RF

(0D) PLL_SLICE RF (1F) REC_FREQ_R RF

(0E) EQ_DELAY RF (20) REC_CUR_L RF

(0F) PLL_POSITION RF (21) REC_CUR_R RF

(10) AUTO_EQ RF (22) ------ ------

(11) Y_CLAMP_DC V_I/F (23) ------ ------

(12) Pb_CLAMP_DC V_I/F (24) SIG_ON_H V_MAIN

[ BATTERY SETTING MENU SCREEN ]

BATTERY SETTING

AUTO

11.3V

The warning is given when the battery voltage less than warning voltage.

ITEM RANGE PRESET REMARK

AUTO / MANUAL AUTO/MANUAL AUTO AUTO : The warning voltage for timing

of BATTERY BEFORE END

follow the type of Battery as

indicated as below. (Battery

type is selected by item

BATTERY SELECT on

FUNCTION 3/5 menu screen)

Ni-Cd 12V: 11.5V

Ni-Cd 13V: 12.8V

Ni-Cd 14V: 13.9V

MAMUAL : The detected voltage of

BATTERY BEFORE END

follows the value of below

setting.

BATTERY BEFORE END 11.0V ~ 14.0V 11.3V Adjusted by 0.1V step.

[ WHITE SHADING MENU SCREEN ]

WHITE SHADING

WHITE (DIGITAL)

AUTO WHITE SHADING can be executed.

ITEM RANGE PRESET REMARK

WHITE(DIGITAL) Execute the Auto White Shading (Digital).

2. Design Menu Screen.

< How to open the Design menu >

Press SHIFT , UP ,DOWN and PAGE button on the Right Side Panel simultaneously, then set the MENU switch to

SET position for open the Design menu.

How to change the setting on each item, how to select the item, how to Page up and down, which are exactly same

method as User and Engineer menu. Design menu has 3 kinds of menu screens. And basically Design menu allows

service personal to service this model. Adjustment procedures give a detail of how to use.

[ DESIGN MENU SCREEN ]

DESIGN

H – F COMP : ON

MENU ALL INIT.

Y/C TIMING : 1

SCH : 4

DEFECT MODE : ON

(STATUS) : OFF

NOTE: Please be carefully press UP or DOWN button by mistake, when select the item “MENU ALL INIT” . Then

reset all data on all menus except value of FLARE and GAMMA.

ITEM RANGE PRESET REMARK

H-F.COMP ON/OFF ON It compensates for the input signal high-

pass frequency component.

MENU ALL INIT. — — Reset all data on all menu (refer to above

sentence). Also reset OPERATION, DRUM

and THEREADING.

LUMADLY 0-3 0 Y signal is delayed against chroma signal.

(Only playback mode)

SCH 0-7 4 SCH adjustment.

DEFECT MODE ON/OFF ON Select the blemish correction mode.

(STATUS) ON/OFF — Display the status of the blemish

correction.

ON : Corrected some blemish.

OFF : Not corrected the blemish.

[ How to reset the HOUR METER ]

DIAGNOSTIC screen displays operating condition and software version as mentioned on Operation Instructions.

With Drum Running Hours and Threading Times can be reset by using HOUR METER RESET menu screen.

< How to reset >

After select the item, press UP or DOWN button, and then execute reset function.

[ HOUR METER RESET MENU SCREEN ]

HOUR METER RESET

DRUM RUNNING RESET

THREADING RESET

ITEM RANGE PRESET REMARK

DRUM RUNNING RESET — — Reset of Drum Running hours.

THREADING RESET — — Reset of loading times.

Andere Handbücher für AJ-D400P

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Camcorder Handbücher

Panasonic

Panasonic HDC-SD1 Bedienungsanleitung

Panasonic

Panasonic Palmcoder Multicam PV-GS400 Bedienungsanleitung

Panasonic

Panasonic AVCCAM AG-HMC40P Bedienungsanleitung

Panasonic

Panasonic Palmcorder Palmsight PV-L958 Bedienungsanleitung

Panasonic

Panasonic AG-CX10 Bedienungsanleitung

Panasonic

Panasonic Palmcorder PV-L50 Bedienungsanleitung

Panasonic

Panasonic HC-V700 Technische Daten

Panasonic

Panasonic AG-HSC1UP Bedienungsanleitung

Panasonic

Panasonic VDR-M70GC Bedienungsanleitung

Panasonic

Panasonic HC-V785 Technische Daten

Panasonic

Panasonic HDC-HS900 Bedienungsanleitung

Panasonic

Panasonic HC-WXF995M Technische Daten

Panasonic

Panasonic HC-V770 Bedienungsanleitung

Panasonic

Panasonic AJ-D215P Bedienungsanleitung

Panasonic

Panasonic HDC-HS900PC Bedienungsanleitung

Panasonic

Panasonic NV-GS27GN Bedienungsanleitung

Panasonic

Panasonic PV-GS19PL Bedienungsanleitung

Panasonic

Panasonic NVM50 Bedienungsanleitung

Panasonic

Panasonic AJ-PX380G Bedienungsanleitung

Panasonic

Panasonic DVCPRO HD AJ-HD1800E Bedienungsanleitung

Panasonic

Panasonic NV-MX7B Bedienungsanleitung

Panasonic

Panasonic Palmcorder PV-L671 Bedienungsanleitung

Panasonic

Panasonic Palmcorder PV-DV951 Bedienungsanleitung

Panasonic

Panasonic NV-GS50EN Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

ATIK Cameras

ATIK Cameras Horizon Bedienungsanleitung

Sony

Sony Handycam HDR-CX580V Bedienungsanleitung

Sharp

Sharp ViewcamZ VL-Z8H Bedienungsanleitung

Philips

Philips M620/21 Bedienungsanleitung