Panasonic VDR-D100EB Bedienungsanleitung

rights reserved. Unauthorized copying and

distribution is a violation of law.

VDR-D100EB VDR-D100EG

VDR-D150E VDR-D150EB

VDR-D150EE VDR-D150EF

VDR-D150EG VDR-D150EP

VDR-D150GC VDR-D150GCS

VDR-D150GN VDR-D150SG

VDR-D152EG VDR-D158GK

Vol. 2

Colours

(S)...................Silver Type

Digital Video Camcorder

ORDER NO. VM0602007CE

1 Service Navigation 3

1.1. Introduction 3

1.2. About Lead Free Solder (PbF) 3

2 Service Fixture & Tools 4

2.1. Service Position 5

2.2. Replacement Procedures for CSP (Chip Size Package) IC

3 Schematic Diagrams 9

3.1. SCHEMATIC DIAGRAM & CIRCUIT BOARD LAYOUT

NOTES 9

3.2. MAIN SCHEMATIC DIAGRAMS 10

3.3. VOLTAGE CHART 26

4 Printed Circuit Board 31

4.1. MAIN P.C.B. 31

5 Appendix Information of Schematic Diagram 35

5.1. CHECKING POINT TABLE OF THE CSP IC 35

5.2. WAVEFORM TABLE 43

6 Replacement Parts Lists 45

6.1. ELECTRICAL REPLACEMENT PARTS LIST 45

CONTENTS

Page Page

1 Service Navigation

1.1. Introduction

This service manual contains technical information which will allow service personnel´s to understand and service this model.

Please place orders using the parts list and not the drawing reference numbers.

If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service

manual.

1.2. About Lead Free Solder (PbF)

Distinction of PbF PCB:

PCBs (manufactured) using lead free solder will have a PbF stamp on the PCB.

Caution:

Pb free solder has a higher melting point than standard solder; Typically the melting point is 50-70°F (30-40°C) higher.

Please use a high temperature soldering iron. In case of the soldering iron with temperature control, please set it to

700±20°F (370±10°C).

Pb free solder will tend to splash when heated too high (about 1100°F/600°C).

When soldering or unsoldering, please completely remove all of the solder on the pins or solder area, and be sure to heat the

soldering points with the Pb free solder until it melts enough.

2 Service Fixture & Tools

2.1. Service Position

Optical pickup

CAUTION: VISIBLE LASER RADIATION DO NOT

STARE INTO THE BEAM OR VIEW DIRECTLY WITH

OPTICAL INSTRUMENTS CLASS 2M

Laser light striking the eye may cause your eyesight

to be lost: For safety, be sure to remove any power

supply (AC adaptor/charger, battery, etc.) from the

DVD video camera/recorder before starting work.

Caution

2.1.1. Extension Cables for Service Position

Using the following Extension Cables, place the unit as shown for check and service.

Note :

1.The LCD open/close Switch is for changing between LCD Display or EVF Display. When turning on EVF Display, place some

paper or tape, etc. on LCD open/close Switch so that this Switch stays ON.

2.To eject the DVD manually, slide the Lock lever on the Disc Cover Lock Unit for a short time.

3.Use a grounded ESD wrist strap while disassembling the Lens portion.

4.Connect the F.P.C.s to the connectors, verifying the direction of F.P.C.s as shown.

5.Use extreme care when plugging in or unplugging connectors.

Fig. 3

2.2. Replacement Procedures for CSP (Chip Size Package) IC

2.2.1. EQUIPMENT

1.Pre-Heater

2.Spot Heater

3.Vacuum Pick-up

4.P.C.B. Holder

Fig. 8-1

2.2.2. CSP IC Location

2.2.3. Temperature Profile for Heat Resistance of CSP IC

Refer to the temperature profile. CSP ICs in the 2006 model have the following temperature profile.

3 Schematic Diagrams

3.1. SCHEMATIC DIAGRAM & CIRCUIT BOARD LAYOUT NOTES

1. Important safety notice

Components identified by the sign have special

characteristics important for safety. When replacing any

of these components, use only the specified parts.

2. Do not use the part numbers shown on these drawings for

ordering.

The correct part number and part value is shown in the

parts list, and may be slightly different or amended since

this drawing was prepared.

3. Use only original replacement parts:

To maintain original function and reliability of repaired

units, use only original replacement parts which are listed

with their part numbers in the parts list section of the

service manual.

4. Parts different in shape or size may be used.

However, only interchangeable parts will be supplied as

service replacement parts.

5. Test point information

: Test point with no test pin.

Schematic Diagram Notes

1. Indication for Zener Voltage of Zener Diodes

The Zener Voltages of Zener Diodes are indicated as

such on Schematic Diagrams.

Example:

(6.2V)......Zener Voltage

2. How to identify Connectors

Each connector is labeled with a Connector No. and Pin

No. Indicating what it is connected to (its counter part).

Use the interconnection schematic diagram to find the

connection between associated connectors.

Example:

The connections between two P.C.B.s are shown

below.

POWER SUPPLY

P.C.B.

MAIN P.C.B.

The Number of pins of the Connector.

Connector No.

on Main P.C.B.

P1503 P3004

(10 Pins)

Ref. No. of the connection parts such as lead cable,

flexible cable which is supplied as a replacement parts.

244

3. Parts marked "PT" are not used in any models included

in this service model.

Example:

100P

C6011 R6097

C6011

Signal Waveform Note

How to read Signal Waveform

0.5 V 20 µs

V1 1.0 Vp-p Volts/Div

Time/Div

V1:Peak to Peak

Voltage Chart Note

Voltage Measurement

a. Color bar signal in SP mode.

b. ---:Unmeasurable or not necessary to measure.

Circuit Board Layout Note

CircuitBoardLayoutsshowcomponentsinstalledfor

variousmodels.

For proper parts content for the model you are servicing,

please refer to the schematic diagram and parts list.

NOTE:

CircuitBoard Layoutsinclude componentswhich arenotused.

SCHEMATIC DIAGRAM & CIRCUIT BOARD LAYOUT NOTES

VDR-D100EG/VDR-D100EB/VDR-D150E/VDR-D150EB/VDR-D150EF

/VDR-D150EG/VDR-D150EP/VDR-D150EE/VDR-D150GC/VDR-D150GN

/VDR-D150GCS/VDR-D150SG/VDR-D152EG/VDR-D158GK

Model Number Indication

Modelnumbers are indicated without"VDR-D."

3.2. MAIN SCHEMATIC DIAGRAMS

LSJB8314

VDR-D100EG/VDR-D100EB/VDR-D150E/VDR-D150EB/VDR-D150EF/VDR-D150EG/VDR-D150EP/VDR-D150EE

/VDR-D150GC/VDR-D150GN/VDR-D150GCS/VDR-D150SG/VDR-D152EG/VDR-D158GK

NOTE:

FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES,

REFER TO BEGINNING OF SCHEMATIC SECTION.

NOTE:

PARTS MARKED "PT" ARE NOT USED.

NOTE: For placing a purchase order of the parts,

be sure to use the part number listed in the parts list.

Do not use the part number on this diagram.

MAIN I SCHEMATIC DIAGRAM

TP3903TP3904

EVF_PCG103

EVF_HCK298

EVF_VST100 EVF_VCK101 EVF_ENB102

EVF_HCK199

EVF_HST97

INT_MIC_L1 2

INT_MIC_R1 1

SPOUT1 62

SPOUT2 61

R3901 PT

R3902 PT

R3903 PT

R3904 PT

R3905 PT

R3907 PT

R3906 PT

R3908 PT

LCD_COM76

LCD_B72

LCD_R74 LCD_G73

AUDIO_L90

AUDIO_R89

Y_OUT91

C_OUT92

POWER_LED 42

XRST_ARM117

EJECT_SW 41

ZOOM_AD 44

POWER_SW 47

AD_KEY_1 40

VREF_H 45

DISC_ACCESS_LED 43

COVER_SW1 7

CARD_CONNECT_LED 60

IRDET 6

AD_KEY_2 49

AD_KEY_3 50

AD_KEY_4 59

LCD_OPEN_SW 63

IR-REMOCON 5

LCD_RVS_SW82

PHOTO_SW 46

PLUGIN_L88

SS_SW 48

LIGHT_ON_H 3

COVER_SW2 8

VIDEO_OUT93

TXD114

XATARESET 9

ARMTCK119

ATADA[2] 27

RTCK118

XATAINTRQ 20

XATACS3 26

EXTRGO0133

SDDATA1 57

DBGR116

ARMTDI136

SDDATA3 54

D+95

ATADA[0] 22

SDDATA2 53

DBGA138

SDDATA0 58

CARD_PRO 51

XATAWR 18

XATADMACK 28

XATADMARQ 30

CMD_O 55

ATADA[1] 21

XATACS1 25

D-96

NARMTRST137

ARMTDO135

CARD_DET 52 RXD113

XATARD 29

ARMTMS134

XATAIORDY 19

TRACECLK120

TRACESYNC132

SD_CLK 56

VBUS87

TP3906

AV_DET

DCLK85

PCST[1]83 PCST[0]84

PCST[3]86

DRV_G_SHOCK 24

DISK_ACCESS_INFO 23

FP2

IRDET 11

IR_REMOCON 10

LIGHT_REG 9

LIGHT_REG 8

LIGHT_ON_H 7

IR_GND 6

D_GND 5

A_M_OUT_L 4

D_GND 3

A_M_OUT_R 2

D_GND 1

REGA+5V

TP3703TP3702 TP3706

1NC

2DRESET

3SDI/DINT

4SDAO/TPC

5/DBEG

6CAM_AGND

7RXD

8TXD

9SYSTEM_RESET

10 DBGR

11 XRST

12 RTCK

13 GND

14 ARMTCK

15 GND

16 GND

17 TRACECLK

18 GND

19 TRACEPKT[1]

20 TRACEPKT[0]

21 GMD

22 TRACEPKT[3]

23 TRACEPKT[2]

24 TRACEPKT[4]

25 GND

26 TRACEPKT[5]

27 TRACEPKT[6]

28 TRACEPKT[7]

29 GND

30 PIPESTA[2]

31 PIPESTA[1]

32 PIPESTA[0]

33 GND

34 TRACESYNC

35 EXTRGO0

36 VDDIO4

37 ARMTMS

38 ARMTDO

39 ARMTDI

40 NARMTRST

41 DBGA

42 REGD+3.4V

43 DRIVE_TXD

44 DRIVE_RXD

45 GND

46 DCLK

47 PCST[0]

48 PCST[1]

49 PCST[2]

50 PCST[3]

FP5

100R3911

100R3912

R3913 0R3914 0

R3915

R3916 0

R3917

LIBATT++94

60 DRV_EMG 39

EVF_B104

EVF_PSIG107 EVF_COM108

EVF_R105 EVF_G106

R3920 0

R3919

R3921

R3918

DRESET109

SDAO_TPC111 DBEG112

SDI_DINT110

FP1

POWER_RESET115

FP3

FP4

LCD_STV181 LCD_U/D80 LCD_CPV79 LCD_OEV78 LCD_STV277

LCD_STH275

LCD_R/L71 LCD_CLK370 LCD_CLK269 LCD_CLK168 LCD_Q2H67 LCD_OEH66 LCD_STH165

BL_CONT64

PIPESTA[0-2]129

ATADD[0-15] 10

PTR3925

PTR3922

PTR3924

PTR3926

47KR3909

47KR3910

PTR3923

TP3901

TP3701 TP3705TP3704

PCST[2]4

TRACEPKT[0-7]121

TP3905

VIDEO_OUT

EVF_B

EVF_VDD

EVF_VCK

EVF_HCK1

EVF_R

EVF_HST

EVF_HCK2

EVF_ENB

EVF_VSS

EVF_COM

EVF_VSS

EVF_PCG

EVF_PSIG

EVF_G

EVF_VST

EVF_BL+5V

C_OUT

AV_GND

AV_DET_L

AUDIO_R

D+

GND

VBUS

AV_GND

Y_OUT

AV_GND

D-

VIDEO

GND

LIBATT++

AV_GND

GND

AUDIO_L

AV_GND

GND

REGD+2.8V

REGA+5V

INTRQ

CS3FX

+5V

DA0

M5V

+1.2V

DOOR_OPEN_SW1

GND

+5V

DA2

DB9

DB13

DIOR

GND

CS1FX

M_GND

DB7

+3.3V

DA1

DMARQ

GND

DIOW

DB11

DRV_EMG

DB10

M_GND

DB3

DOOR_OPEN_SW2

GND

DB4

DRIVE_G_SHOCK

+3.3V

DB0

GND

M5V

M_GND

M5V

UARTI

GND

DMACK

+3.3V

GND

RESET

DB8

DASP

DB1

GND

TOROY

GND

DB12

DB15

DB6

UARTO

+1.2V

+5V

DB14

DB5

GND

DB2

123456

GND

SP-

DSC+315V

GND

CARD_DET

CARD_PRO

CARD_D1

AUTO/MNL

ACCESS_LED

CARD_D0

CARD_D2

RESET_SW

CARD_D3

CARD_CMD

VDD

LCD_OPEN

GND

CARD_CLK

GND

SP+

GND(LED)

GND

POWER_LED

AD_KEY2(CROSS-KEY)

DISK_ACCESS_LED

VREF_H(TELE)

EJECT_SW

PHOTO_SW

MODE_VDD

ZOOM_COM

POWER_SW

S/S_SW

AD_KEY3(OPE-KEY1)

VREF_L(WIDE)

AD_KEY1(MODE-DIAL)

LCD_CPV

BL_CONT

LCD_CLK3

A_GND

LCD_B

LCD_G

LCD_COM

LCD_STH2

LCD+12V

LCD_BL+5V

A_GND

LCD_STV2

LCD_RVS

LCD_CLK1

LCD_R

LCD_U/D

LCD+3V

LCD_Q2H

LCD_STV1

GND

LCD_OEV

LCD_STH1

LCD_OEH

LCD_CLK2

LCD-15V

LCD_BL+5V

LCD_R/L

LCD+5V

LCD+12V

LCD_BL+5V

LCD-15V

LCD/EVF+2.8V

REGD+3.3V

EVF_BL+5V

DRV+M5V

DRV+3.3V

DVD_DRV+1.2V

DRV+5V

TO FRONT P.C.B.

FP6501

TO SIDE R P.C.B.

FP6301

TO LCD SW

TO JACK P.C.B.

B7001

TO EVF BACKLIGHT

FP901

DVD DRIVE FRAME

UNIT

ATADD[7]

ATADD[6]

ATADD[5]

ATADD[4]

ATADD[3]

ATADD[2]

ATADD[1]

ATADD[0]

ATADD[15]

ATADD[14]

ATADD[13]

ATADD[12]

ATADD[11]

ATADD[10]

ATADD[9]

ATADD[8]

TO SIDE L

/DISK UNIT

REGD+3.4V

TRACEPKT[1]

TRACEPKT[0]

TRACEPKT[7]

TRACEPKT[3]

TRACEPKT[2]

TRACEPKT[4]

TRACEPKT[5]

TRACEPKT[6]

PIPESTA[2]

PIPESTA[1]

PIPESTA[0]

LIGHT_REG

EVF_VDD

TO MVII (C-1)

TO M IX (A-5)

TO MVII (C-1)

TO M II (B-12)

TO M II (B-1)

TO M II (B-12)

TO M II (B-1)

TO M II (D-12)

TO MV (D-8)

TO M II (B-12)

TO MV (D-8)

TO M II (B-1)

TO MV (D-8)

TO MV (C-1)

TO MV (D-8)

TO M II (C-12)

TO M II (B-12)

TO M II (A-1)

TO M II (C-12)

TO M II (A-1)

TO M II (C-12)

TO MV (E-8)

TO M II (C-12)

TO MV (E-8)

TO M II (C-12)

TO MVII (B-6)

TO M II (C-1)

TO M IX (C-5)

TO M IX (A-5)

TO M IX (C-5)

TO M IX (A-5)

TO M II (C-1)

TO M II (D-12)

TO M II (E-12)

TO MV (A-1)

TO M II (C-1)

TO MVII (D-6)

TO M II (D-1)

TO MV (E-8)

TO M IX (B-5)

TO M II (E-12)

TO M II (D-12)

TO M II (E-12)

TO MV (D-1)

TO M II (D-1)

TO M II (D-12)

TO MV (D-1)

TO M II (C-1)

TO MV (D-1)

REC AUDIO SIGNAL PB AUDIO SIGNALPB VIDEO SIGNALREC VIDEO SIGNAL

NO CONNECTION

LINKTOVOLTAGE CHART

Andere Handbücher für VDR-D100EB

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Camcorder Handbücher

Panasonic

Panasonic PV-L552H Bedienungsanleitung

Panasonic

Panasonic Palmcorder PalmSight PV-L578 Bedienungsanleitung

Panasonic

Panasonic Palmcorder Palmsight PV-L859 Bedienungsanleitung

Panasonic

Panasonic AG-EZ1UP Bedienungsanleitung

Panasonic

Panasonic AVCCAM AG-AC90P Bedienungsanleitung

Panasonic

Panasonic Plamcorder PalmSight PV-L671 Bedienungsanleitung

Panasonic

Panasonic Digital Palmcorder PV-GS150 Bedienungsanleitung

Panasonic

Panasonic NV-RZ10B Bedienungsanleitung

Panasonic

Panasonic Palmcorder Palmsight PV-L650 Bedienungsanleitung

Panasonic

Panasonic Palmcorder Multicam PV-GS33 Bedienungsanleitung

Panasonic

Panasonic HDC-SDT750PP Bedienungsanleitung

Panasonic

Panasonic AGHVX200APS Bedienungsanleitung

Panasonic

Panasonic Palmcorder MultiCam PV-DV203 Bedienungsanleitung

Panasonic

Panasonic DVD e.cam VDR VDR-D210 Bedienungsanleitung

Panasonic

Panasonic VARICAM LT Bedienungsanleitung

Panasonic

Panasonic AJ-D965MC Bedienungsanleitung

Panasonic

Panasonic AG-HPX600PF Bedienungsanleitung

Panasonic

Panasonic AG-AC7P Bedienungsanleitung

Panasonic

Panasonic NV-GS180EG Bedienungsanleitung

Panasonic

Panasonic AJ-D400 Bedienungsanleitung

Panasonic

Panasonic Palmcorder PV-D496 Bedienungsanleitung

Panasonic

Panasonic PV-L651 Bedienungsanleitung

Panasonic

Panasonic NV-DS30EG Bedienungsanleitung

Panasonic

Panasonic Palmcorder PalmSight PV-L681 Bedienungsanleitung

Beliebte Camcorder Handbücher anderer Marken

Toshiba

Toshiba CAMILEO Z100 Bedienungsanleitung

Canon

Canon RC 260 Bedienungsanleitung

Sony

Sony Handycam DCR-DVD7E Bedienungsanleitung

Brinno

Brinno TimeLapse TLC200 Bedienungsanleitung

JVC

JVC GR-SXM68AC Kurzanleitung

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Bedienungsanleitung

MYDLINK

MYDLINK DCS-6100LH Bedienungsanleitung

Sony

Sony video Hi8 Handycam CCD-TR555 Bedienungsanleitung

SECURECOM

SECURECOM V-5014B Bedienungsanleitung

Sharper Image

Sharper Image U-VIDEO Bedienungsanleitung

JVC

JVC AA-V15EG Bedienungsanleitung

Canon

Canon LEGRIA HV40 Bedienungsanleitung

Sony

Sony Handycam DCR-VX2000 Bedienungsanleitung

RCA

RCA CC616 Bedienungsanleitung

ATIK Cameras

ATIK Cameras Horizon Bedienungsanleitung

Sony

Sony Handycam HDR-CX580V Bedienungsanleitung

Sharp

Sharp ViewcamZ VL-Z8H Bedienungsanleitung

Philips

Philips M620/21 Bedienungsanleitung