Panasonic AU-VCVF10G Bedienungsanleitung

Operating Instructions

Electronic HD Color View Finder

Model No. AU-VCVF10G

ENGLISH

Before operating this product, please read the instructions carefully and save this manual

for future use.

Before using this product, be sure to read “Read this rst!” (pages 2 to 3).

VQT5M60A-1(E)

W0316HM1037 -YI

Read this rst!

indicates safety information.

WARNING:

fTo reduce the risk of re, do not expose

this equipment to rain or moisture.

fTo reduce the risk of re, keep this

equipment away from all liquids. Use

and store only in locations which are

not exposed to the risk of dripping or

splashing liquids, and do not place any

liquid containers on top of the equipment.

WARNING:

Always keep slider unit mounting screws

(accessory) out of the reach of babies and

small children.

CAUTION:

Do not remove panel covers by unscrewing.

No user serviceable parts inside.

Refer servicing to qualied service personnel.

CAUTION:

To reduce the risk of re and annoying

interference, use the recommended

accessories only.

CAUTION:

Do not point the eyepiece directly at the sun.

Read this rst!

indicates safety information.

FCC NOTICE (USA)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

CAUTION:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

fReorient or relocate the receiving antenna.

fIncrease the separation between the equipment and receiver.

fConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

fConsult the dealer or an experienced radio/TV technician for help.

The user may nd the booklet “Something About Interference” available from FCC local

regional ofces helpful.

FCC Warning:

To assure continued FCC emission limit compliance, follow the attached installation

instructions and the user must use only shielded interface cables when connecting to host

computer or peripheral devices. Also, any unauthorized changes or modications to this

equipment could void the user’s authority to operate this device.

NOTIFICATION (Canada)

CAN ICES-3(B)/NMB-3(B)

Read this rst!

For Turky

AEEE Yönetmeliğine Uygundur.

AEEE Complies with Directive of Turkey.

The rating plate is on the underside of the unit.

Manufactured by: Panasonic Corporation, Osaka, Japan

Importer’s name and address of pursuant to EU rules:

Panasonic Marketing Europe GmbH

Panasonic Testing Centre

Winsbergring 15, 22525 Hamburg, Germany

Disposal of Old Equipment

Only for European Union and countries with recycling systems

This symbol on the products, packaging, and/or accompanying documents means

that used electrical and electronic products must not be mixed with general

household waste.

For proper treatment, recovery and recycling of old products, please take them to

applicable collection points in accordance with your national legislation.

By disposing of them correctly, you will help to save valuable resources and

prevent any potential negative effects on human health and the environment.

For more information about collection and recycling, please contact your local

municipality, dealer or supplier.

Penalties may be applicable for incorrect disposal of this waste, in accordance with

national legislation.

Декларація про Відповідність

Вимогам Технічного Регламенту Обмеження Використання деяких Небезпечних Речовин в

електричному та електронному обладнанні

(затвердженого Постановою №1057 Кабінету Міністрів України)

Виріб відповідає вимогам Технічного Регламенту Обмеження Використання деяких

Небезпечних Речовин в електричному та електронному обладнанні (ТР ОВНР).

Вміст небезпечних речовин у випадках, не обумовлених в Додатку №2 ТР ОВНР, :

1. свинець(Pb) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на

мільйон;

2. кадмій (Cd) – не перевищує 0,01 % ваги речовини або в концентрації до 100 частин на

мільйон;

3. ртуть(Hg) – не перевищує 0,1 % ваги речовини або в концентрації до 1000 частин на

мільйон;

4. шестивалентний хром (Cr6+) – не перевищує 0,1 % ваги речовини або в концентрації до

1000 частин на мільйон;

5. полібромбіфеноли (PBB) – не перевищує 0,1 % ваги речовини або в концентрації до 1000

частин на мільйон;

6. полібромдефенілові ефіри (PBDE) – не перевищує 0,1 % ваги речовини або в концентрації

до 1000 частин на мільйон.

fAll names, company names, product names, etc., contained in this document are trademarks or

registered trademarks of their respective owners.

How to read this document

rIllustrations

fIllustrations may differ from the actual product.

rConventions used in this manual

fWords and phrases in [ ] brackets indicate details and content displayed in the viewnder or control

panel.

fWords and phrases in < > brackets indicate design text used on this camera, such as button names.

rReference pages

fReference pages in this document are indicated by (page 00).

Contents

Read this rst! 2

Before using the camera 7

Accessories 8

Description of Parts 9

Left side 9

Front 9

Rear 1 0

Top 11

Adjusting and setting the viewnder 12

Adjustment method 1 2

Viewnder status display 14

Lamp display 1 4

Status display 1 4

Storing 17

Cautions when storing the camera recorder 1 7

Specications 18

Before using the camera

fSince the viewnder uses organic EL, if the same image or letters are allowed to be displayed for a long

time, the image may be burned into the screen. There is no problem with the recorded images.

Switch the screen by turning off the screen or by using the eye sensor, etc.

Accessories

fSlider unit

fSlider unit mounting screw (2 pcs.)

fBNC cable

fDC cable

fEye cup (already attached to the electronic HD color view nder)

fEye piece lter (already attached to the electronic HD color view nder)

@@NOTE

tAfter unpacking the product, dispose of the packing material properly.

Description of Parts

Left side

5 6 7

1 <EVF USER 1>/<EVF USER 2> buttons

User-selected functions can be assigned to each button. Pressing a button performs the assigned

function. Functions are set on the viewnder menu.

2 <CAM MENU> button

Displays the camera menu screen.

3 <EVF MENU> button

Displays the viewnder menu screen.

4 Jog dial

Operation dial.

Used for setting, moving, and selecting in menus.

5 Zoom ring

Ring which enlarges/reduces the size of the viewnder display screen.

This is used to enlarge the display when adjusting the focus. When the display is enlarged, some parts

of the video may be hidden.

6 Visibility adjustment ring

Ring which adjusts the visibility. Turn this ring while pressing and holding the upper button.

7 Eye cup

Front

1 Tally LED

Lights up in red during recording. This can be disabled in the viewnder menu.

Description of Parts

2 Video signal input terminal

An input terminal for 3G/HD-SDI video signal input.

Use the supplied BNC cable or the 5C-FB equivalent double-shielded cable for the cable to connect to

this terminal.

3 <DC IN 12V> terminal

An input terminal for power supply input.

Connect to the electronic HD color view nder power supply terminal on the camera.

Use the supplied DC cable when connecting a cable to this terminal.

Using the external DC power supply

To use it by itself, connect the <DC IN 12V> terminal of the camera to the external DC power supply.

rExternal DC power supply

Connect after making sure that the output voltage of the external DC power supply is compatible with the rated

voltage of the camera.

When the power of the camera is turned on, inrush current is generated. Insufcient power supply when turning

on the power may cause a malfunction. Use of the external DC power supply that can secure power more than

twice the total power consumption of the camera is recommended.

fMake sure of the pin alignment of the DC output terminal of the external DC power supply and the camera

<DC IN 12V> terminal, and connect the polarity correctly.

Connecting the GND terminal to +12 V power supply by mistake may cause re or malfunction.

DC IN

1 GND

2Data communication (from the viewnder to the camera body)

3Data communication (from the camera body to the viewnder)

4+12 V

Cable connector

HR10A-7R-4SC (73) (Hirose Electric Co.)

Rear

1 2

3 4

1 Eye sensor

Screen is displayed on the viewnder when an eye is brought close.

The eye sensor may not work properly depending on the shape of glasses in use, how you hold the

camera, or the strong light hitting around the eye piece.

2 Lock lever

Secures the viewnder in place.

Inhaltsverzeichnis

Andere Panasonic Kamerazubehör Handbücher

Panasonic

Panasonic AJ-YA600P Bedienungsanleitung

Panasonic

Panasonic DMW-USBC1 Bedienungsanleitung

Panasonic

Panasonic LUMIX DMW-BGS1 Bedienungsanleitung

Panasonic

Panasonic CGR18650CG Bedienungsanleitung

Panasonic

Panasonic AWPB308 - LENS I/F OPTION CARD Bedienungsanleitung

Panasonic

Panasonic WV-7130D Bedienungsanleitung

Panasonic

Panasonic WJMS488 - QUAD UNIT Bedienungsanleitung

Panasonic

Panasonic DP-100 series Bedienungsanleitung

Panasonic

Panasonic ML614 Bedienungsanleitung

Panasonic

Panasonic DMW-LMC52PP Bedienungsanleitung

Panasonic

Panasonic WV-CS1S Bedienungsanleitung

Panasonic

Panasonic LJ-SK56A Bedienungsanleitung

Panasonic

Panasonic AW- PH350 Bedienungsanleitung

Panasonic

Panasonic VARICAM LT Bedienungsanleitung

Panasonic

Panasonic VariCam AU-VSHL1G Bedienungsanleitung

Panasonic

Panasonic AW-PB506AN Bedienungsanleitung

Panasonic

Panasonic H-NS043 Bedienungsanleitung

Panasonic

Panasonic KX-TGA20AZ Bedienungsanleitung

Panasonic

Panasonic UP-RW1245P1 Bedienungsanleitung

Panasonic

Panasonic LC-R063R4P Bedienungsanleitung

Panasonic

Panasonic WV-Q126A Bedienungsanleitung

Panasonic

Panasonic AJHVF21G - HD EVF - MULTI-LANG Bedienungsanleitung

Panasonic

Panasonic DMW-DCC11 Bedienungsanleitung

Panasonic

Panasonic WV7220D - CCTV ACCESSORIES Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung