Panasonic AWPH360N - PAN/TILT HEAD Bedienungsanleitung

Before use Installation work Other

Operating Instructions

Indoor Pan/Tilt Head

Model No. AW-PH360N

Before operating this product, please read the instructions carefully and save this manual for

future use.

Installation work instructions included

Printed in Japan

indicates safety information.

Safety precautions

WARNING:

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPARATUS TO RAIN OR MOISTURE.

• THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR

SPLASHING AND THAT NO OBJECTS FILLED WITH LIQUIDS, SUCH AS

VASES, SHALL BE PLACED ON THE APPARATUS.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING

INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, REFER CHANGES OF

SWITCH SETTINGS INSIDE THE UNIT TO QUALIFIED SERVICE PERSONNEL.

WARNING:

HAZARDOUS MOVING PARTS

KEEP FINGERS AND OTHER BODY PARTS AWAY.

The lightning flash with arrowhead symbol, within an equilateral triangle,

is intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(service) instructions in the literature accompanying the appliance.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

– 2 –

– 3 –

Replace battery with part No. CR2032 only.

Use of another battery may present a risk of fire or explosion.

Caution—Battery may explode if mistreated.

Do not recharge, disassemble or dispose of in fire.

Safety precautions

indicates safety information.

This class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

For CANADA

FCC Note:

This equipment has been tested and found to comply with the limits for a class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

Warning:

To assure continued FCC emission limit compliance, the user must use

only shielded interface cables when connecting to external units. Also, any

unauthorized changes or modifications to this equipment could void the user’s

authority to operate it.

This product contains a CR Coin Cell Lithium Battery which contains Perchlorate

Material – special handling may apply.

See www.dtsc.ca/gov/hazardouswaste.perchlorate.

– 4 –

Safety precautions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near

water.

6) Clean only with dry cloth.

7) Do not block any ventilation

openings. Install in accordance with

the manufacturer's instructions.

8) Do not install near any heat sources

such as radiators, heat registers,

stoves, or other apparatus (including

amplifiers) that produce heat.

9) Do not defeat the safety purpose

of the polarized or grounding-type

plug. A polarized plug has two

blades with one wider than the

other. A grounding-type plug has

two blades and a third grounding

prong. The wide blade or the third

prong are provided for your safety.

If the provided plug does not fit into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord form being

walked on or pinched particularly

at plugs, convenience receptacles,

and the point where they exit from

the apparatus.

11) Only use attachments/accessories

specified by the manufacturer.

12) Use only with the cart,

stand, tripod, bracket,

or table specified by

the manufacturer,

or sold with the

apparatus. When a cart is used,

use caution when moving the cart/

apparatus combination to avoid

injury from tip-over.

13) Unplug this apparatus during

lightning storms or when unused for

long periods of time.

14) Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as power-supply cord or plug is

damaged, liquid has been spilled

or objects have fallen into the

apparatus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

Read these operating instructions carefully before using the unit. Follow the safety

instructions on the unit and the applicable safety instructions listed below. Keep

these operating instructions handy for future reference.

IMPORTANT SAFETY

INSTRUCTIONS

indicates safety information.

– 5 –

Before use

Contents

Before use

Introduction ........................................... 6

Accessories .......................................... 7

Installation precautions ....................... 8

Precautions for use ............................ 10

Parts and their functions ................... 11

Installation work

Installation ........................................... 13

1. Setting the switches ...................... 13

2. Assembling and attaching

the tilting arm ................................. 17

3. Installing the pan-tilt head ............. 20

4. Mounting the camera and lens ...... 29

Concerning the safe modes .............. 33

Connections ........................................ 34

Example of connections .................... 34

Connecting the AC adapter

for use with the pan-tilt head ............. 40

Limiters ................................................ 42

Other

Troubleshooting .................................. 43

Replacement of consumable parts ... 44

Appearance ......................................... 45

Specifications ..................................... 46

– 6 –

Introduction

pThis is a compact stand-alone type of pan-tilt head which is capable of rotating

95 degrees upward and downward and 300 degrees on the horizontal.

pInformation on the combinations of the cameras and lenses which can be used with this

pan-tilt head can be found in the Specifications section.

Cameras and lenses not mentioned in this section cannot be used. (Page 46)

pThe positions and settings for shooting up to 50 points can be entered as data into the

preset memory.

pThis pan-tilt head can be controlled using a controller (

AW-RP301, AW-RP305, AW-RP501,

AW-RP505, AW-RP555, AW-RP605A, AW-RP655, AW-RP400 or AW-RP50

) and/or a personal

computer.

The controller may need to be upgraded to a more recent version so that it will be able

to support this pan-tilt head. For details, consult your dealer.

For the purposes of this manual, the model numbers of the units are given as listed in

the table below.

Model number of unit Model number

given in manual Model number of unit Model number

given in manual

AW-E350P AW-E350 AW-RP301P AW-RP301

AW-E650P AW-E650 AW-RP305P AW-RP305

AW-E750P AW-E750 AW-RP501P AW-RP501

AW-E860N AW-E860 AW-RP505P AW-RP505

AW-HE870N AW-HE870 AW-HB505P AW-HB505

AK-HC1500G AK-HC1500 AW-RP555N AW-RP555

AK-HC1800G AK-HC1800 AW-RP605AN AW-RP605A

AW-HHD870N AW-HHD870 AW-RP655N AW-RP655

AW-PB504N AW-PB504 AW-RP400N AW-RP400

AW-LZ16MD55P AW-LZ16MD55 AW-RP50N AW-RP50

AW-LZ16MD73P AW-LZ16MD73 AK-HRP150G AK-HRP150

AW-LZ17MD9AG AW-LZ17MD9A AW-RC400N AW-RC400

AK-LZ20M85G AK-LZ20M85 AW-CB400N AW-CB400

AW-PS300AP AW-PS300A AW-CA28T9P AW-CA28T9

AW-PS550N AW-PS550 AW-CA15H29G AW-CA15H29

AW-PS510AN AW-PS510A AW-CAK4H1G AW-CAK4H1

– 7 –

Before use

Accessories

Please check the following accessories have been provided.

Operating Instructions ........................................................ (C1)

Camera cable ..................................................................... (C1)

DC cable ............................................................................ (C1)

Tilting arm .......................................................................... (C1)

Tilting arm fixing screws

M4 C12 mm ................................................................... (C4)

Camera mounting plate ...................................................... (C1)

Guide screws

(with flat washers, spring washers)

M4 C18 mm ................................................................... (C2)

Drop-prevention wire .......................................................... (C1)

Mounting screw for wire

(with flat washer, spring washer)

M4 C8 mm ..................................................................... (C1)

wDisclaimer of warranty

IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY

PARTY OR ANY PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE

MAINTENANCE OF THE PRODUCT, FOR THE CASES, INCLUDING BUT NOT

LIMITED TO BELOW:

ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR

INDIRECT, SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF

OR RELATING TO THE PRODUCT;

PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR

NEGLIGENT OPERATION OF THE USER;

UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE

PRODUCT BY THE USER;

INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT

DISPLAYED, DUE TO ANY REASON OR CAUSE INCLUDING ANY FAILURE OR

PROBLEM OF THE PRODUCT;

ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR

DAMAGE, ARISING OUT OF THE SYSTEM COMBINED BY THE DEVICES OF

THIRD PARTY;

LOSS OF REGISTERED DATA CAUSED BY ANY FAILURE.

– 8 –

Installation precautions

Parts to be provided by the customer for installation

This unit comes with a drop-prevention wire (approx. 200 (7-7/8˝) mm long) and

mounting screw for wire.

Provide the following items to install the pan-tilt head and underneath support plate.

pEmbedded anchors:C5

(4 locations for M6, 1 location for M8),

or hangers (pages 24 to 28)

pHexagon head bolts or nuts (M6: for

pan-tilt head): 4 pcs each

pHexagon head bolt or nut

(M8: for underneath support plate):

1 pc each

pFlat washers (M6): C8

pFlat washer (M8): C2

pSpring washers (M6): C8

pSpring washer (M8): C2

For details, refer to page 20.

pInstallation locations

• Be absolutely sure to use anchors or hangers for installation.

• A withdrawal strength of at least 340 N (35 kgf) per location is required to install the

pan-tilt head.

Fashion the anchors or hangers in such a way that they will be strong enough to

support at least 5 times this withdrawal strength.

• When installing the pan-tilt head, be absolutely sure to install the pan-tilt head unit (in

4 locations) and the drop prevention underneath support plate (in 1 location).

Avoid installing and using the unit in the following kinds of locations.

• On surfaces of plasterboard or wood

• On walls (where the unit would be

installed sideways)

• Where the unit will be directly exposed

to rain or water (including under the

eaves and other such places)

• In kitchens and other places with high

levels of steam, oil and grease

• Outdoors or places where the

temperature will exceed 45 °C (113 °F)

• Cold places where the temperature will

drop below –10 °C (14 °F)

• Places where the humidity is higher

than 90 %

• Swimming pools and other places

where chemicals are used

• At sea and in coastal areas, and

places where corrosive gases are

given off

• Places exposed to heavy vibrations

from vehicles, ships, etc. (the unit

is not designed to be installed in

vehicles)

• Places near the air outlets of air

conditioners, near doors where the

outside air comes in and other places

where the temperature changes

suddenly or drastically

– 9 –

Before use

Installation precautions

pTightening up the mounting screws

• Be absolutely sure to use screwdrivers and wrenches for the screws and bolts, and

install the unit securely.

• After installing the unit, check that there is no play or looseness.

Installing the pan-tilt head Clamping torque

Hexagon head bolts (M6) 5.0 N

•m (50 kgf•cm)

Hexagon head bolts (M8) 12.0 N

•m (120 kgf•cm)

pIf the pan-tilt head is not going to be used, do not leave it standing but ensure

without fail that it is removed.

pUse the AC adapter (AW-PS300A or AW-PS550) to supply power to the pan-tilt

head.

Do not use other AC adapters or units since they may burst into flames or emit

smoke.

pWhen handling the pan-tilt head, be absolutely sure to hold it by its base.

Trouble may be caused if the rotating part is held or rotated by hand.

pThe maximum load is 4 kg (8.8 lbs). However, if the unit’s balance cannot be

adjusted properly, no guarantees can be made for the unit’s functions and

performance so refrain from using accessories which add to the unit’s weight.

(Refer to page 17 for the balance adjustment procedure.)

pAfter installing the pan-tilt head, mount the camera onto it.

pWhen mounting the camera, take every means to ensure that the camera will not

become dislodged and prevent it from falling out of place.

pProducts other than a camera and lens, such as a prompter, may not be mounted

on the pan-tilt head.

pFor the lens, use the recommended lens model (page 46) that corresponds to the

camera to be used.

Do not use a lens that is not among the ones recommended.

– 10 –

Precautions for use

Ensuring that the unit will continue to perform stably for a prolonged period of time

Using the pan-tilt head in a location with high temperatures and high levels of humidity

will cause its parts to deteriorate, shortening its service life as a result. Do not place the

unit where it will be directly exposed to heat, whether heat radiating from the installation

location or heat from a heating appliance, etc.

Handle the unit carefully

Do not drop the unit or subject it to strong impact or vibration. Doing so may cause

trouble.

If the pan-tilt head is not going to be used, do not leave it standing but ensure

without fail that it is removed.

This pan-tilt head uses a manganese dioxide-lithium battery (CR2032).

Be absolutely sure to remove this battery when disposing of the pan-tilt head or printed

circuit boards.

Do not dispose of this type of battery as household garbage.

For details on how to remove the battery, refer to the section on replacing the battery in

“Replacement of consumable parts” (page 44).

The unit comes with a safe mode function.

The safe mode function is designed to protect people and personal property from harm

and the pan-tilt head from damage.

For further details, refer to “Concerning the safe modes” (page 33).

When one of the safe modes is established, the tally lamps blink, and panning and

tilting operations can no longer be performed.

The safe mode is released when the PAN/TILT lever on the controller is returned to its

center position.

If a safe mode is established frequently, consult your dealer.

Andere Handbücher für AWPH360N - PAN/TILT HEAD

Inhaltsverzeichnis

Andere Panasonic Kamerazubehör Handbücher

Panasonic

Panasonic WVQ169 - CCTV CEILING MOUNT BRACKET Bedienungsanleitung

Panasonic

Panasonic ER-CBL1 Bedienungsanleitung

Panasonic

Panasonic AW-LK50 Bedienungsanleitung

Panasonic

Panasonic WV-VF42 Bedienungsanleitung

Panasonic

Panasonic Lumix H-FS014045 Bedienungsanleitung

Panasonic

Panasonic AW-PB504N Bedienungsanleitung

Panasonic

Panasonic VARICAM AU-VCVF2G Bedienungsanleitung

Panasonic

Panasonic BB-HCA1A-B Bedienungsanleitung

Panasonic

Panasonic DMW-DCC9 Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-MCTZ10 Bedienungsanleitung

Panasonic

Panasonic KX-HNP100FX Bedienungsanleitung

Panasonic

Panasonic AWRC400N - PAN/TITLT HEAD Bedienungsanleitung

Panasonic

Panasonic WX-SB100E Bedienungsanleitung

Panasonic

Panasonic KX-TGA20AZ Bedienungsanleitung

Panasonic

Panasonic WV-Q167 Bedienungsanleitung

Panasonic

Panasonic PDM9 Installations- und Betriebshandbuch

Panasonic

Panasonic Videolarm POD9CW Bedienungsanleitung

Panasonic

Panasonic HHR150AA Bedienungsanleitung

Panasonic

Panasonic DMW-DCC5 Bedienungsanleitung

Panasonic

Panasonic AW-360C10 Bedienungsanleitung

Panasonic

Panasonic LC-P0612P Bedienungsanleitung

Panasonic

Panasonic DMW-BGGH5 Bedienungsanleitung

Panasonic

Panasonic WV-Q108AE Bedienungsanleitung

Panasonic

Panasonic AK-HVF931AEA Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung