Panasonic KX-HNP100C Bedienungsanleitung

Installation Guide

Home Network System

Backup Battery

Model No. KX-HNP100C

Thank you for purchasing a Panasonic product.

This document explains how to install the backup battery properly.

For details about how to use the system, refer to the User’s Guide

(page 15).

Please read this document before using the unit and save it for future

reference.

For assistance, please visit our Support page:

www.panasonic.ca/english/support

In order to use this device:

RDownload the latest version of the [Home Network] app.

RUpdate your hub to the latest firmware version (version 5.50 or later).

For more information, refer to the User’s Guide (page 15).

Printed in China

HNP100C_(en_en)_0729_ver.030.pdf 1 2015/07/29 14:11:24

Introduction
Accessory information ...............3
Other information .......................3
Important Information
About this system ......................4
For your safety ...........................4
Important safety instructions ......6
For best performance ................6
Other information .......................7
General product
information
General information about the
backup battery ...........................8
Power outage notification by
phone .........................................8
Power outage notification to your
mobile device .............................9
Wireless communication
range .........................................9
Setup
Part names and functions ........10
LED indicator ...........................10
Setup overview ........................11
Inserting the battery .................11
Connections .............................12
Registering the backup
battery ......................................14
Appendix
Features available when using the
[Home Network] app ................15
Accessing the User’s Guide ....15
Specifications ..........................16
Industry Canada Notices and
other information ......................17
Warranty ..................................18
2
Table of Contents
HNP100C_(en_en)_0729_ver.030.pdf 2 2015/07/29 14:11:24

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

ARechargeable battery*11

*1 See page 3 for replacement battery information.

Additional/replacement accessories

Please contact your nearest Panasonic dealer for sales information (page 18).

Accessory item Model no./Specifications

Rechargeable

battery

KX-PRA10EX

RLithium Ion (Li-Ion) type battery

Other information

RDesign and specifications are subject to change without notice.

RThe illustrations in these instructions may vary slightly from the actual product.

Trademarks

RiPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other

countries.

RAndroid is a trademark of Google Inc.

RMicrosoft, Windows, and Internet Explorer are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

RWi-Fi is a registered trademark of Wi-Fi Alliance.

RAll other trademarks identified herein are the property of their respective owners.

For assistance, visit www.panasonic.ca/english/support 3

Introduction

HNP100C_(en_en)_0729_ver.030.pdf 3 2015/07/29 14:11:24

About this system

RThis system is an auxiliary system; it

is not designed to provide complete

protection from property loss.

Panasonic will not be held

responsible in the event that

property loss occurs while this

system is in operation.

RThe system’s wireless features are

subject to interference, therefore

functionality in all situations cannot

be guaranteed. Panasonic will not

be held responsible for injury or

damage to property that occurs in

the event of wireless communication

error or failure.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

RUse only the power source marked

on the product.

RDisconnect the product from power

outlets if it emits smoke, an

abnormal smell, or makes an

unusual noise. These conditions can

cause fire or electric shock. Confirm

that smoke has stopped emitting

and contact us by visiting our

Support page:

www.panasonic.ca/english/

support

RDisconnect from power outlets and

never touch the inside of the product

if its casing has been broken open.

Danger of electric shock exists.

RNever touch the plug with wet

hands. Danger of electric shock

exists.

RDo not connect non-specified

devices.

RDo not leave the power cable

exposed outdoors.

Installation

RTo prevent the risk of fire or

electrical shock, do not expose the

product to rain or any type of

moisture.

RDo not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

RDo not allow the AC adaptor to be

excessively pulled, bent or placed

under heavy objects.

Operating safeguards

RBefore opening the cover,

disconnect the product from the

power outlet and from the connected

device.

RBefore cleaning, disconnect the

product from the power outlet and

from the connected device, and then

remove the battery. Do not use

liquid or aerosol cleansers when

cleaning.

RDo not disassemble the product.

RNever put metal objects inside the

product. If metal objects enter the

product, turn off the circuit breaker

4For assistance, visit www.panasonic.ca/english/support

Important Information

HNP100C_(en_en)_0729_ver.030.pdf 4 2015/07/29 14:11:24

and contact an authorized service

centre.

Medical

RConsult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW.

RDo not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

Lithium Ion (Li-Ion) battery

RDo not open, puncture, crush, or

drop the battery. A damaged battery

must not be used. This can result in

the risk of fire, explosion,

overheating, and leaking of the

electrolyte.

RDo not touch the terminals and

with metal objects.

RRisk of explosion if battery is

replaced by an incorrect type.

Dispose of used battery according to

local regulations.

RIf any electrolyte should come into

contact with your hands or clothes,

wash it off thoroughly with water.

RIf any electrolyte should come into

contact with your eyes, never rub

your eyes. Rinse your eyes

thoroughly with water, and then

consult a doctor.

CAUTION

Installation and location

RNever install wiring during a lightning

storm.

RThe AC adaptor is used as the main

disconnect device. Ensure that the

AC outlet is installed near the

product and is easily accessible.

RTo avoid the risk of strangulation,

keep the product and the AC

adaptor cord at least 1 m (3 feet)

from a child’s crib and out of the

reach of small children.

Lithium Ion (Li-Ion) battery

RUse only the specified battery.

RInsert the battery correctly.

RDo not leave the battery in an

automobile exposed to direct

sunlight for a long period of time with

the doors and windows closed.

RRemove the battery if you do not

use the product for a long period of

time. Keep it in a cool, dark area.

RDo not replace a battery with wet

hands.

RStop using the battery immediately

and keep away from fire if it emits an

abnormal smell or leaks electrolyte.

Released electrolyte may cause fire

or burns.

RExercise care when handling the

batteries. Do not allow conductive

materials such as rings, bracelets, or

keys to touch the batteries,

otherwise a short circuit may cause

the batteries and/or the conductive

material to overheat and cause

burns.

RDo not put any conductive materials

such as coins or hairpins onto the

For assistance, visit www.panasonic.ca/english/support 5

Important Information

HNP100C_(en_en)_0729_ver.030.pdf 5 2015/07/29 14:11:24

battery terminals. This can result in

the risk of overheating.

RCharge the battery provided with or

identified for use with this product

only, in accordance with the

instructions and limitations specified

in this manual.

Attention:

The lithium ion/polymer battery you

have purchased is recyclable.

Please call 1-800-8-BATTERY

(1-800-822-8837) for information on

how to recycle this battery.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Do not use this product near water

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement or near a

swimming pool.

2. Use only the batteries indicated in

this document. Do not dispose of

batteries in a fire. They may

explode. Check with local codes for

possible special disposal

instructions.

SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise

The hub and other compatible

Panasonic devices use radio waves to

communicate with each other.

RFor maximum coverage and

noise-free communications, place

your hub:

– at a convenient, high, and central

location with no obstructions

between the product and hub in

an indoor environment.

– away from electronic appliances

such as TVs, radios, personal

computers, wireless devices, or

other phones.

– facing away from radio frequency

transmitters, such as external

antennas of mobile phone cell

stations. (Avoid putting the hub

on a bay window or near a

window.)

RIf the reception for a hub location is

not satisfactory, move the hub to

another location for better reception.

Environment

RKeep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

RThe product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

RThe product should not be exposed

to direct sunlight.

RDo not place heavy objects on top of

the product.

RThe product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

6For assistance, visit www.panasonic.ca/english/support

Important Information

HNP100C_(en_en)_0729_ver.030.pdf 6 2015/07/29 14:11:25

temperature is less than 5 °C (41 °F)

or greater than 40 °C (104 °F).

Damp basements should also be

avoided.

ROperating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

Other information

CAUTION: Risk of explosion if battery

is replaced by an incorrect type.

Dispose of used batteries according to

the instructions.

Routine care

RWipe the outer surface of the

product with a soft moist cloth.

RDo not use benzine, thinner, or any

abrasive powder.

For assistance, visit www.panasonic.ca/english/support 7

Important Information

HNP100C_(en_en)_0729_ver.030.pdf 7 2015/07/29 14:11:25

General information

about the backup

battery

The backup battery can provide power

to your Home Network System devices

(one device per backup battery),

allowing your devices to continue to

operate in the event of a power outage.

Instead of connecting an AC adaptor to

your hub, camera, etc., the backup

battery is connected to your device and

is also connected to the power outlet.

During normal operation, the backup

battery uses power from the power

outlet to charge the battery and to

supply power to the connected device.

In the event of a power outage, the

device is powered by the backup

battery only.

You can register the backup battery

to the hub and take advantage of

other features, but note that the

backup battery does not need to be

registered in order for it to supply

power to the connected device in the

event of a power outage.

Backup battery performance

When the supplied battery is installed

in the backup battery, you can expect

the following operating time in the

event of a power outage.

Compatible

devices*1

Operating

time*2

Hub (KX-HNB600) 1.5 hours

(standby,

connected to 4

cameras, not

connected to a

Wi-Fi® network)

Indoor Camera

(KX-HNC200)

2.0 hours

(standby)

1.5 hours

(standby, when

night vision

mode is active)

Outdoor Camera

(KX-HNC600)

Indoor Siren

(KX-HNS105)

7 hours

(standby)

*1 At the time of printing. Additional

compatible devices may become

available at a later date.

*2 All times are approximate.

Power outage

notification by phone

In the event of a power outage, the

backup battery can trigger the hub to

call a pre-programmed phone number

and notify you of the power outage. In

order to use this feature, the following

items are required.

– The hub must be connected to your

landline (refer to the System Setup

Guide included with the hub).

– The backup battery must be

registered to the hub (page 14).

– You must use the [Home Network]

app to program the phone number

that will be called in the event of a

power outage. For more information,

refer to the User’s Guide

(page 15).

8For assistance, visit www.panasonic.ca/english/support

General product information

HNP100C_(en_en)_0729_ver.030.pdf 8 2015/07/29 14:11:25

– The hub must be able to make calls

using your landline even if there is a

power outage. If your landline phone

service requires a modem or other

device to make phone calls (typically

this is the case for landline phone

service provided by cable company,

Internet service provider, VoIP

service provider, etc.), and if that

device does not contain its own

backup battery, the hub will not be

able to make calls in the event of a

power outage.

Power outage

notification to your

mobile device

In the event of a power outage, the

backup battery can trigger the hub to

send a notification to the [Home

Network] app. In order to use this

feature, the following items are

required.

– The backup battery must be

registered to the hub (page 14).

– You must use the [Home Network]

app to enable the desired

notifications. For more information,

refer to the User’s Guide

(page 15).

– To receive power outage

notifications, the hub must be able to

access the Internet even if there is a

power outage. This means that your

wireless router and any other

devices that are used when

accessing the Internet (cable

modem, network hubs, etc.) must

also have their own backup power

supplies*1, otherwise the hub cannot

send notifications to the [Home

Network] app in the event of a

power outage.

*1 The KX-HNP100 Backup Battery

cannot supply power to these

devices. A third-party backup

power supply is required.

Wireless

communication

range

The wireless communication range of

each device in the system from the hub

is approximately 50 m (160 feet)

indoors and approximately 300 m

(1,000 feet) outdoors. Wireless

communication may be unreliable

when the following obstacles are

located between the hub and other

devices.

– Metal doors or screens

– Walls containing aluminum-sheet

insulation

– Walls made of concrete or

corrugated iron

– Double-pane glass windows

– Multiple walls

– When using each device on

separate floors or in different

buildings

Note:

RThe LED indicator lights in red if it is

out of range of the hub. In this case,

confirm all connections, including

those of the hub.

For assistance, visit www.panasonic.ca/english/support 9

General product information

HNP100C_(en_en)_0729_ver.030.pdf 9 2015/07/29 14:11:25

Part names and

functions

Power supply plug

LED indicator

Battery cover

DC jack

M N

Used to register the backup

battery to the hub.

LED indicator

You can use the LED indicator to

confirm the backup battery’s status.

Indicator Status

Off The battery is fully

charged

Green, lit Battery power is

being consumed

Green,

blinking slowly

Registration mode

(you pressed and

held MN)

Red, lit Backup battery is

out of range of the

hub

Red, blinking

slowly

No battery, or

device error

Amber, lit Battery is charging

Note:

RThe backup battery consumes

battery power whenever it is not

connected to the power outlet. To

keep the backup battery charged

and ready with the maximum

amount of backup power, we

recommend you keep it connected

to a power outlet at all times.

RWhen the battery operating time

seems to be shorter, even after I

fully charged the battery:

– Clean the battery ends ( , )

and the charge contacts with a

dry cloth and charge again.

– It is time to replace the battery.

10 For assistance, visit www.panasonic.ca/english/support

Setup

HNP100C_(en_en)_0729_ver.030.pdf 10 2015/07/29 14:11:25

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Kamerazubehör Handbücher

Panasonic

Panasonic AWPH300 - INDOOR PAN/TILT HEAD Bedienungsanleitung

Panasonic

Panasonic WV-7135 Bedienungsanleitung

Panasonic

Panasonic Lumix H-HS35100 Bedienungsanleitung

Panasonic

Panasonic AWPH405N - PAN/TILT CAMERA Bedienungsanleitung

Panasonic

Panasonic LUMIX DMW-BGGH5E Bedienungsanleitung

Panasonic

Panasonic HHR380A Bedienungsanleitung

Panasonic

Panasonic WV-Q100A Bedienungsanleitung

Panasonic

Panasonic WV7110A - MONITOR Bedienungsanleitung

Panasonic

Panasonic KXLD50 - COLOR LCD VIEWFINDER Bedienungsanleitung

Panasonic

Panasonic WV7230 - CCTV ACCESSORIES Bedienungsanleitung

Panasonic

Panasonic DMW-EC1 Bedienungsanleitung

Panasonic

Panasonic PPDW12 Bedienungsanleitung

Panasonic

Panasonic Lumix H-H014 Bedienungsanleitung

Panasonic

Panasonic AWRC400N - PAN/TITLT HEAD Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-MCFX40 Bedienungsanleitung

Panasonic

Panasonic AGVF5P - 1.5" B&W VIEWFINDER Bedienungsanleitung

Panasonic

Panasonic WV-Q150C Bedienungsanleitung

Panasonic

Panasonic AJ-CA900P Bedienungsanleitung

Panasonic

Panasonic LC-XC1228AP Bedienungsanleitung

Panasonic

Panasonic AW- PH350 Bedienungsanleitung

Panasonic

Panasonic WV-Q152C Bedienungsanleitung

Panasonic

Panasonic WV-7130D Bedienungsanleitung

Panasonic

Panasonic DMW-YAGHPP Bedienungsanleitung

Panasonic

Panasonic WV-CW7S Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Pentax

Pentax Data Back Fc Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Olympus

Olympus PT-EP05L Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung