Panasonic WV7110A - MONITOR Bedienungsanleitung

Before attempting to connect or operate this product,

please read these instructions completely.

Indoor Camera Housing

WV-7110A

-2-

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The serial number of this product may be found on the bot-

tom of the unit.

You should note the serial number of this unit in the space

provided and retain this book as a permanent record of your

purchase to aid identification in the event of theft.

Model No. WV-7110A

Serial No.

-3-

CONTENTS

PREFACE .................................................................... 3

PRECAUTI0NS ............................................................ 3

INSTALLATION ........................................................... 4

LENS FOCUS ADJUSTMENT .................................... 10

SPECIFICATIONS ...................................................... 11

ACCESSORIES .......................................................... 11

PREFACE

The Panasonic's WV-7110A Camera Housing is

designed to be used for indoor applications. This hous-

ing can easily be installed after the camera adjustment

and installation had been completed.

PRECAUTIONS

•It is designed for indoor use. Avoid using it in the

extreme environment where the rain falls directly,

extremely high temperature and humidity gener-

ate.

•Do not use the housing in the condition where the

sunlight directly falls to the housing. It may

increase interior temperature of the housing

extremely high.

•Use a dry cloth to clean the housing if it is dirty. If

the dirt is formidable, it is advisable to use a mild

detergent and wipe gently.

-4-

2. Mounting of the Camera

2-1. Mount the camera mounting bracket or the pan/tilt

mechanism onto the mounting adaptor of the cam-

era.

When the cameras and lenses shown below are

installed into this housing, choose the suitable

angle according to the following tables.

Mounting Adaptor

INSTALLATION

A.Mounting from top

1. Disassembling of camera housing

Remove the Front Case, Rear Cover and Upper/

Lower Covers as shown in the following.

Front Case

Upper Cover Rear Cover

Lower Cover

WV-LA6/LA12

WV-LA4.5/LA6B2/LA12B2

WV-LA8B/LA16B/LA25B/LA50B

WV-LM6B2/LM12B2

Lens

WV-BL200 Series

WV-BL600 Series

Camera

Mounting Adaptor

WV-LA2.8 Angle-B

Use Angle

APPLICABLE MODELS AND MOUNTING

-5-

See below.

Lens

WV-CP460 Series

WV-CP470 Series

WV-CP240 Series

WV-BP140 Series

Camera

Angle-A

Apply the placing directions and fixing holes shown below.

Use Angle

ABCDEF

Hole

<180˚ Reversal Position><Normal Position>

Use properly the other side applicable hole,

besides the hole A through F.

DCBA

Lens

Camera

WV-LA908C3

WV-LA408C3

WV-LZA61/2

WV-LZF61/2

WV-LA210C3

WV-LA9C3B

WV-LA4R5C3B

WV-LA2R8C3B

WV-LZ62/8

WV-LZ61/10 WV-LA12A

WV-LA4R5A

WV-LA6A

WV-CP460 series A C (180° reversal) B A

WV-CP470 series D F (180° reversal) F F (180° reversal)

WV-CP240 series

WV-BP140 series DE(180° reversal) F E (180° reversal)

APPLICABLE MODELS AND MOUNTING

-6-

a.Mounting of the Angle-A(supplied)

a-1. Remove the mounting adaptor of the camera by

removing the two mounting adaptor fixing screws.

Note: Use the supplied screws when fixing the Angle-

A or Angle-B. Using shorter ones may cause the

camera to fall down, or longer ones may damage

the inside of the camera.

a-2. Fix the Angle-A onto the camera by using the two

Angle Fixing Screws(supplied) as shown in the fol-

lowing.

Angle-A (normal)

Angle-A (180° reversal)

Mounting Adaptor Angle Fixing Screws (supplied)

Angle-A (supplied)

Angle Fixing Screws (supplied)

-7-

a-3. Be sure to stick the Angle Seat(supplied) onto the

Angle-A.

Caution: When the left and right pan limit screws

should be removed from the pan/tilt unit due to the

Angle-A installation, use the Angle Seat as shown

below.

b.Mounting of the Angle-B(supplied)

b-1. Remove the mounting adaptor of the camera by

removing the two mounting adaptor fixing screws.

b-2. Fix the Angle-B onto the camera by using the two

Angle Fixing Screws(supplied) as shown in the

following.

Angle seat (supplied)

Cut here when using

the Angle-A (normal) Cut here when using

the Angle-A (180°reversal)

Mounting Adaptor

Angle-B (supplied)

Angle Fixing Screws (supplied)

-8-

b-3. Re-install the mounting adaptor on the Angle-B.

2-2. Complete the adjustment and connections

required for the camera operation.

2-3. Mount the camera mounting bracket or the pan/tilt

mechanism onto the mounting adaptor of the cam-

era.

3. Installation of Upper and Lower Cover

3-1. Place the Upper Cover on the camera.

3-2. Attach the Lower Cover to the Upper Cover.

Note: Do not clamp the cable with this installation.

-9-

3-3. Attach the Front Case to the Upper and Lower

Covers.

4. Installation of Rear Cover

Attache the Rear Cover as shown in the following.

Note:

1. Be sure to insert the cable opening side to this

housing first.

2. If the cable opening is too small due to the number

of coaxial cable, enlarge the cable opening by

cutting off the Rear Cover.

Cut off the

shaded portion

-10-

5Cable Clamp

5-1. Attach the Cable Clamp (supplied) to the housing.

5-2. Clamp the cables with the cable clamp.

B.Mounting from bottom

The Upper and Lower Cover must be attached on

the camera in reverse.

LENS FOCUS ADJUSTMENT

When the focus adjustment is required, remove the

Front Case.

Note: When the WV-LZ61/10 or WV-LZ62/8 is

mounted on the camera, adjust the lens focus

before mounting the upper cover, lower cover,

and front case.

CAUTION:

The reflection of the power indicator on the

front of camera may be displayed in the pic-

ture.

In this case, seal the LED by using the Power

Indicator Masking Label on the LED.

Andere Handbücher für WV7110A - MONITOR

Inhaltsverzeichnis

Andere Panasonic Kamerazubehör Handbücher

Panasonic

Panasonic WV-Q103A Bedienungsanleitung

Panasonic

Panasonic POD7C Bedienungsanleitung

Panasonic

Panasonic WV-7160D Bedienungsanleitung

Panasonic

Panasonic DMW-DCC5 Bedienungsanleitung

Panasonic

Panasonic KXCPG100 - VIDEO TELECONFERENCI Bedienungsanleitung

Panasonic

Panasonic WV-Q168 Bedienungsanleitung

Panasonic

Panasonic AW-CH600 Bedienungsanleitung

Panasonic

Panasonic VIDEOALARM PODV7CPNS Bedienungsanleitung

Panasonic

Panasonic DMW-VF1PP Bedienungsanleitung

Panasonic

Panasonic DMW-DCC7 Bedienungsanleitung

Panasonic

Panasonic PACA2 Merkblatt

Panasonic

Panasonic AWPH600P - OUTDOOR PAN/TILT HEAD Bedienungsanleitung

Panasonic

Panasonic AJ-VF20WBPE Bedienungsanleitung

Panasonic

Panasonic H-NS043 Bedienungsanleitung

Panasonic

Panasonic WVLZ6115 - ZOOM LENS Bedienungsanleitung

Panasonic

Panasonic WV-Q161 Bedienungsanleitung

Panasonic

Panasonic LUMIX DMW-BG1 Bedienungsanleitung

Panasonic

Panasonic WV-Q158C Bedienungsanleitung

Panasonic

Panasonic AW-PB302 Bedienungsanleitung

Panasonic

Panasonic LC-R061R3P Bedienungsanleitung

Panasonic

Panasonic DMW-LVF1 Bedienungsanleitung

Panasonic

Panasonic Lumix DMW-MCTZ10 Bedienungsanleitung

Panasonic

Panasonic WVPS154 - CAMERA DRIVE UNIT Bedienungsanleitung

Panasonic

Panasonic PUM8 Bedienungsanleitung

Beliebte Kamerazubehör Handbücher anderer Marken

Viltrox

Viltrox EF-NEX Montageanleitung

Calumet

Calumet 7100 Series CK7114 Bedienungsanleitung

Ropox

Ropox 4Single Series Bedienungsanleitung

Cambo

Cambo Wide DS Digital Series Betriebsanleitung

Samsung

Samsung SHG-120 Bedienungsanleitung

Ryobi

Ryobi BPL-1820 Bedienungsanleitung

Aegis

Aegis ABL-36020P Bedienungsanleitung

Fantasea

Fantasea EyeGrabber F Series Bedienungsanleitung

Honeywell

Honeywell HDZ20HD Bedienungsanleitung

EGO

EGO BA1400T Bedienungsanleitung

Sima

Sima SRW-62 Bedienungsanleitung

Shape

Shape A7SSMKIT Bedienungsanleitung

Slide Kamera

Slide Kamera HST-2 Bedienungsanleitung

Power works

Power works 2902613 Bedienungsanleitung

SES

SES SE-2047-2 Bedienungsanleitung

Starlite

Starlite OctoDome nxt Bedienungsanleitung

Custom Brackets

Custom Brackets Digital PRO-M Bedienungsanleitung

Vivo

Vivo MOUNT-LT01C Bedienungsanleitung