Panasonic ET-D3QW300 Bedienungsanleitung

Thank you for purchasing this Panasonic product.

■To ensure correct use of this lens, please read the operating instructions supplied

with the lens and the projector carefully.

■Before using this product, be sure to read “Read this rst!” (Page 3).

■Please save this manual for future use.

Commercial Use

Model No. ET-D3QW300

ET-D3QS400

ET-D3QT500

ET-D3QT600

ET-D3QT700

ET-D3QT800

DPQX1392ZA/X1

Zoom lens 　　　　　　　　　

Operating Instructions

ENGLISH

FRANÇAIS

日本語

ET-D3QW300 ET-D3QS400

ET-D3QT500

ET-D3QT700 ET-D3QT800

ET-D3QT600

2-ENGLISH

Read this rst! ......................................................................................3

Before Use.............................................................................................4

Preparation............................................................................................4

Before replacing the projection lens........................................................4

Attaching and Detaching the Lens ..........................................................4

Peripheral focus adjustment function ......................................................5

Lens calibration .......................................................................................6

Projection relationships.......................................................................7

Lens shift ranges..................................................................................8

Specications .......................................................................................9

Dimensions .........................................................................................10

Projected image size and Projection distance.......Appendix / Annexe / 付録 1

The "Appendix" can be found after the Japanese language section ( 日本語 ).

█ Contents

ENGLISH-3

Read this rst! Always follow these precautions

WARNING:

Do not look at or place your skin into the light emitted from the lens while the

projector is being used.

Doing so can cause burns or loss of sight.

zStrong light is emitted from the projector’s lens. Do not look at or place your hands

directly into this light.

zTurn off the power when moving away from the projection lens or projector.

Do not project an image with the lens cover attached.

zDoing so can cause re.

CAUTION:

Before replacing the projection lens, be sure to turn off the power and

disconnect the power plug from the wall outlet.

zUnexpected projection of light may cause injury to eyes.

zReplacing the projection lens without removing the power plug may result in electric

shock.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

zStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause re, damage to the object, or malfunction of the lens and

projector.

zStrong light is emitted from the projector’s lens.

Do not open the desiccant bag. Do not eat the contents.

Inadvertently ingesting desiccant could be harmful.

zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water

and seek medical attention.

zKeep desiccant out of the reach of children.

4-ENGLISH

This zoom lens is a projection lens equipped with an EEPROM*1 and stepping motor.

*1 EEPROM: Electrically erasable programmable read-only memory

■Supported projectors

PT-RQ50K

Note

zSome of the alphabet letters at the end of projector model numbers may be omitted in this

manual.

zModels other than the above may also be supported. Refer to the operating instructions for

your projector or the Panasonic website (https://panasonic.net/cns/projector/).

■Supplied Accessories

Make sure that the following has been provided.

Part name Appearance

Lens cover

1 each for front and rear

zThe product is delivered

with lens covers attached.

zThe shape and size of the

lens covers are different for

each product.

Before Use

Preparation

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating

instructions of the projector.

Attention

zMake sure that the projector power supply is switched off before attaching or detaching the

projection lens.

zAfter removing the projection lens, store it safely away from vibration or impacts.

z Do not touch the electrical contacts of the projection lens with your ngers. Dust and dirt on

the contacts may cause contact malfunctions, while static electricity may damage the unit.

zDo not touch the surface of the lens with bare hands. Finger prints and dirt on the surface

of the lens will be magnied by the lens and lower the quality of the projected image. Place

the supplied lens cover on the zoom lens when the projector is not in use.

zThe lens is made of glass. The lens could be damaged if brought into contact with or

rubbed against hard objects. Handle the lens carefully.

zUse a clean, soft and dry cloth to wipe away dust and dirt from the projection lens.

Do not use uffy cloths containing oil, water or dust for cleaning. The lens is easily

damaged, so do not apply excessive pressure when wiping it.

Attaching and Detaching the Lens

For details on attaching and detaching the projection lens, refer to the operating

instructions of the projector.

ENGLISH-5

Preparation (continued)

Peripheral focus adjustment function

When you change the size of the projected image, the focal balance between the center

and peripheral areas of the screen may shift. This shift in balance tends to increase

proportionally with smaller throw ratios.

The ET-D3QW300 / ET-D3QS400 / ET-D3QT500 is equipped with a peripheral focus

adjustment function to correct the shift in focal balance between the center and

peripheral areas of the screen.

1) Loosen the lock screw by

turning it counterclockwise.

2) Turn the lens barrel tip or

peripheral focus adjustment

ring in the direction of the

arrow to match the projection

distance displayed on the lens

to the actual distance from the

lens to the screen.

3) Tighten the lock screw by

turning it clockwise.

4) Operate the projector to align

the focus of the center of the

projected image.

Note

zThe projection distances displayed on the lens are approximate guides.

The illustrations in this procedure depict

attachment of the ET-D3QW300 onto the

PT-RQ50K.

zThe structure of the peripheral focus

adjustment part differs depending on the

projection lens type.

Peripheral focus adjustment ring

Lock screw

■Adjusting the focus

6-ENGLISH

Lens calibration

Perform lens calibration after attaching the lens.

The illustrations in this procedure depict

use of the ET-D3QW300 as an example.

1) Press the <MENU> button.

2) Use the ▲ and ▼ buttons to

select [PROJECTOR SETUP],

and press the <ENTER>

button.

zThe [PROJECTOR SETUP] screen

appears.

3) Use the ▲ and ▼ buttons to

select [LENS], and press the

<ENTER> button.

zThe [LENS] screen appears.

4) Use the ▲ and ▼ buttons to

select [LENS CALIBRATION],

and press the <ENTER>

button.

zThe [LENS CALIBRATION] screen

appears.

5) Use the ▲ and ▼ buttons to

select [SHIFT/FOCUS/ZOOM],

and press the <ENTER>

button.

zThe conrmation screen appears.

6) Use the and buttons to

select [OK], and press the

<ENTER> button.

zLens calibration starts.

zThe projection lens moves to the

home position after adjustment range

calibration is complete.

1/2

PROJECTOR SETUP

PROJECTOR ID ALL

PROJECTION METHOD

LENS

OPERATION SETTING NORMAL

LIGHT OUTPUT 100.0%

BRIGHTNESS CONTROL AUTO

NO SIGNAL SETTING

LAST MEMORY

LAST USED

INITIAL STARTUP

STARTUP INPUT SELECT

OFF

DATE AND TIME

SCHEDULE

MULTI PROJECTOR SYNC

MENU SELECT

ENTER

SUB MENU

MENU SELECT

ENTER

LENS

LENS INFORMATION SETTING

LENS MEMORY

LENS HOME POSITION

ACTIVE FOCUS OPTIMIZER

LENS CALIBRATION

EXECUTE

MENU SELECT

ENTER

LENS CALIBRATION : ET-D3QW300

SHIFT/FOCUS/ZOOM

SHIFT/FOCUS

ZOOM

LENS CALIBRATION : ET-D3QW300

Proceed LENS CALIBRATION,

and return to HOME POSITION.

EXECUTE

CHANGE

ENTER

CANCEL

Note

zIf lens calibration is not performed, the available zoom range will be narrowed.

Preparation (continued)

ENGLISH-7

Projection relationships

The dimensional relationship between the screen and the projector is shown below.

■Dimensional relationship diagram

Note

zThis diagram assumes that the size and position of the projected image will be adjusted so

that the image lls the entire screen.

zThis illustration is not drawn to scale.

L Projection distance

LW Minimum distance

LT Maximum distance

L1 Lens protrusion dimension

SH Projected image height

SW Projected image width

SD Projected image size

zDimension for L1 (approximate values) (Unit: m)

ET-D3QW300 ET-D3QS400 ET-D3QT500 ET-D3QT600 ET-D3QT700 ET-D3QT800

0.246 0.232 0.208 0.149 0.221 0.267

Note

zThe illustrations of projectors in this manual are for informational purposes only and do not

represent a specic projector model. Congurations may vary with the model.

Attention

zTo prevent obstruction of the intake and exhaust vents, install the projector with a

clearance at least 500 mm (1 ft. 7 in.) from walls and objects.

If you are installing the projector in a sealed space, be sure to provide additional air

conditioning equipment and ventilation equipment. Insufcient ventilation will result in an

accumulation of heat and may activate the projector's protection circuit.

zAvoid setting up in places which are subject to sudden temperature changes, such as near

an air conditioner or lighting equipment (studio lamps, etc.).

■Dimensional relationship

For details on the projection distance (L), refer to “Projected image size and Projection

distance” and “Projection distance formulas” in the Appendix.

L (LW/LT)

SW SH

投写画面

スクリーン

Projected image

Screen

8-ENGLISH

After moving the lens to the home position according to “Lens calibration” on page 6,

you can use the lens shift adjustment function on the projector to adjust the position of

the projected image within the respective lens shift ranges based on the optical screen

center position (standard projection position). The optical screen center position is the

screen position using the optical center of the projector as the base.

Perform lens shift adjustment within the ranges shown in the following illustrations.

Moving the lens outside of the adjustment ranges may alter the focus. This occurs due

to limitations in lens movement that are intended to protect the optical components.

The following illustrations depict lens shift ranges for oor installations of the projector.

ET-D3QW300

0.4V

0.14H0.14H

0.4V

Standard

projection position

Projected image

width H

Projected

image

height V

Optical center

ET-D3QS400 / ET-D3QT500

0.45V

0.16H0.16H

0.45V

Projected

image

height V

Projected image

width H

Standard

projection position

Optical center

ET-D3QT600

0.08H0.08H

0.25V 0.25V

Projected image

width H

Projected

image

height V

Standard

projection position

Optical center

Lens shift ranges

ENGLISH-9

Lens shift ranges (continued)

ET-D3QT700 / ET-D3QT800

0.1H0.1H

0.3V 0.3V

Projected image

width H

Projected

image

height V

Standard

projection position

Optical center

Note

zThe home position of the projector a point of origin position for the lens shift (i.e., vertical and

horizontal positions of the lens) based on the results of lens calibration. It is not the optical

center position of the screen.

Specications

Check the specications of each projection lens, and use the appropriate lens for your

intended use.

Model No. ET-D3QW300 ET-D3QS400 ET-D3QT500

F value 2.5 2.5 2.5

Focal Length (f) 35.2 mm (1-3/8") -

53.7 mm (2-1/8")

45.3 mm (1-25/32") -

65.6 mm (2-19/32")

61.4 mm (2-13/32") -

105.2 mm (4-5/32")

Dimensions

Width 187 mm (7-3/8") 187 mm (7-3/8") 198 mm (7-25/32")

Height 192 mm (7-9/16") 192 mm (7-9/16") 203 mm (8")

Depth 466 mm (18-11/32") 450 mm (17-23/32") 420 mm (16-17/32")

Net Weight 9.3 kg (20.50 lb) 8.5 kg (18.74 lb) 9.6 kg (21.16 lb)

Model No. ET-D3QT600 ET-D3QT700 ET-D3QT800

F value 2.5 2.5 2.5

Focal Length (f) 85.0 mm (3-11/32") -

121.6 mm (4-25/32")

122.8 mm (4-27/32") -

172.3 mm (6-25/32")

156.5 mm (6-5/32") -

243.1 mm (9-9/16")

Dimensions

Width 187 mm (7-3/8") 187 mm (7-3/8") 187 mm (7-3/8")

Height 192 mm (7-9/16") 192 mm (7-9/16") 192 mm (7-9/16")

Depth 370 mm (14-9/16") 442 mm (17-13/32") 486 mm (19-1/8")

Net Weight 6.4 kg (14.11 lb) 7.3 kg (16.09 lb) 8.0 kg (17.64 lb)

10-ENGLISH

Dimensions

■ET-D3QW300

(Unit: mm)

Ø155 (6-3/32")

466 (18-11/32")

187 (7-3/8")

192 (7-9/16")

Ø155 (6-3/32")

■ET-D3QS400

(Unit: mm)

450 (17-23/32")

192 (7-9/16")

Ø139 (5-15/32")

187 (7-3/8")

Ø155 (6-3/32")

■ET-D3QT500

(Unit: mm)

Ø155 (6-3/32")

420 (16-17/32")

Ø178 (7")

203 (8")

198 (7-25/32")

Andere Handbücher für ET-D3QW300

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Kameraobjektiv Handbücher

Panasonic

Panasonic LUMIX S PRO Bedienungsanleitung

Panasonic

Panasonic Wv-Lz81/10 Bedienungsanleitung

Panasonic

Panasonic H-HSA12035PP Bedienungsanleitung

Panasonic

Panasonic WV-LA2R8C3B Bedienungsanleitung

Panasonic

Panasonic Lumix H-FS14140 Installationsanleitung

Panasonic

Panasonic VWCLT2 Bedienungsanleitung

Panasonic

Panasonic Lumix H-ES045 Bedienungsanleitung

Panasonic

Panasonic 5025232891795 Bedienungsanleitung

Panasonic

Panasonic WV-LFR4R5C3 Bedienungsanleitung

Panasonic

Panasonic ET-D75LE30 Bedienungsanleitung

Panasonic

Panasonic LUMIX S 85 mm F1.8 Bedienungsanleitung

Panasonic

Panasonic WV-LZ12A Bedienungsanleitung

Panasonic

Panasonic Lumix H-H020A Bedienungsanleitung

Panasonic

Panasonic 12-60mm f/3.5-5.6 Bedienungsanleitung

Panasonic

Panasonic ET-DLE060 Bedienungsanleitung

Panasonic

Panasonic H-PS45175PP Bedienungsanleitung

Panasonic

Panasonic Lumix S-R70200 Bedienungsanleitung

Panasonic

Panasonic WV-LP6 Bedienungsanleitung

Panasonic

Panasonic WV-LZ14 Bedienungsanleitung

Panasonic

Panasonic H-FS35100 Bedienungsanleitung

Panasonic

Panasonic WV-LA12A Bedienungsanleitung

Panasonic

Panasonic WV-LZ62/8S Bedienungsanleitung

Panasonic

Panasonic WV-LZ80 Benutzerhandbuch

Panasonic

Panasonic Lumix H-X015 Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Nikon

Nikon AF-S VR 24-120 f/3.5-5.6G IF-ED Bedienungsanleitung

Rokinon

Rokinon DS50M-C Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung