Panasonic Lumix H-HS12035 Bedienungsanleitung

Owner’s Manual

INTERCHANGEABLE LENS FOR DIGITAL CAMERA

Model No. H-HS12035

For USA and Puerto Rico assistance, please call: 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call: 1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: [email protected]

until

2012/6/6

Before connecting, operating or adjusting this product, please read the instructions completely.

VQT4G28

F0512SM0

VQT4G28_ENG_SPA.book 1 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

Contents

Information for Your Safety.....................................2

Precautions...........................................................4

Supplied Accessories .............................................5

Attaching/Detaching the Lens.................................6

Names and Functions of Components ...................8

Cautions for Use.....................................................9

Troubleshooting....................................................9

Specifications........................................................10

Limited Warranty...................................................11

-If you see this symbol-

THE FOLLOWING APPLIES ONLY IN CANADA.

Information for Your Safety

Keep the unit as far away as possible from

electromagnetic equipment (such as microwave

ovens, TVs, video games, radio transmitters,

high-voltage lines etc.).

≥Do not use the camera near cell phones because

doing so may result in noise adversely affecting

the pictures and sound.

≥If the camera is adversely affected by

electromagnetic equipment and stops functioning

properly, turn the camera off and remove the

battery and/or the connected AC adaptor. Then

reinsert the battery and/or reconnect the AC

adaptor and turn the camera on.

Information on Disposal in other Countries

outside the European Union

This symbol is only valid in the

European Union.

If you wish to discard this

product, please contact your

local authorities or dealer and

ask for the correct method of

disposal.

This Class B digital apparatus complies with

Canadian ICES-003.

VQT4G28_ENG_SPA.book 2 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

The lens can be used with a digital camera

compatible with the lens mount standard for the

“Micro Four ThirdsTM System”.

≥It cannot be mounted on the Four ThirdsTM mount

specification camera.

≥The digital camera illustrations in this owner’s

manual show DMC-GH2 as an example.

≥The appearance and specifications of products

described in this manual may differ from the actual

products you have purchased due to later

enhancements.

≥

Micro Four Thirds

and Micro Four Thirds Logo

marks are trademarks or registered trademarks of

Olympus Imaging Corporation, in Japan, the United

States, the European Union and other countries.

≥Four ThirdsTM and Four Thirds Logo marks are

trademarks or registered trademarks of Olympus

Imaging Corporation, in Japan, the United States,

the European Union and other countries.

≥G MICRO SYSTEM is an interchangeable lens

type digital camera system of LUMIX based on a

Micro Four Thirds System standard.

≥Other names of systems and products mentioned

in these instructions are usually the registered

trademarks or trademarks of the manufacturers

who developed the system or product concerned.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found tocomply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or

television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

●Reorient or relocate the receiving antenna.

●

Increase the separation between the equipment and receiver.

●Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician

for help.

Any unauthorized changes or modifications to this equipment

would void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Support Contact:

Panasonic Consumer Marketing Company of North America

Telephone No.: 1-800-211-PANA (7262)

ENGLISH

VQT4G28_ENG_SPA.book 3 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

∫Lens Care

≥This lens has a dust-proof and splash-proof

construction. When using it, please be careful of

the following.

If the lens is not working properly, consult the

dealer or your nearest Service Center.

–Please attach the lens to a dust-proof and

splash-proof digital camera.

–When detaching the lens from the digital camera,

take care to ensure that sand, dust, splashes of

water etc., do not get into the lens or the

terminals.

–This lens is not waterproof and cannot be used to

record underwater. For splash-proofing, the lens

is constructed to resist the entry of water. If

splashes of water etc. do adhere to the lens, wipe

after use with a soft dry cloth.

≥To improve the dust-proofing and splash-proofing

of this lens, a lens mount rubber is used in the

mounting portion. After changing the lens a

number of times, you may find that the lens mount

rubber has marked the mount portion of the digital

camera body, which does not affect its

performance.

For information on changing the lens mount

rubber, contact your nearest Service Center.

≥Do not press the lens with excessive force.

≥When there is dirt (water, oil, and fingerprints, etc.)

on the surface of the lens, the picture may be

affected. Lightly wipe the surface of the lens with a

soft, dry cloth before and after taking pictures.

≥Do not place the lens mount

facing downwards. Do not

allow the lens contact points

1to become dirty.

∫About Condensation

(Fogging of the Lens)

≥Condensation occurs when there are differences

in temperature and humidity as described below.

Condensation can cause the lens to become dirty

and lead to mold and malfunctioning, so exercise

caution in the following situations:

–When the camera is brought indoors from outside

during cold weather

–When the camera is brought into an air-

conditioned car

–When cold air from an air conditioner is directly

blown onto the lens

–In humid places

Precautions

VQT4G28_ENG_SPA.book 4 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

≥Put the camera into a plastic bag to allow it to

acclimatize to the surrounding temperature in

order to prevent condensation. If condensation

occurs, turn the power off and leave it for about

two hours. Once the camera acclimatizes to the

surrounding temperature the condensation will go

away naturally.

Supplied Accessories

[Inspection to be performed when you unpack

the unit]

When removing the unit from its packing box, check

that the main unit and the supplied accessories are

there and also check their external appearance and

functions to verify that they have not sustained any

damage during distribution and transportation.

If you discover any trouble, contact your vendor

before using the product.

Product numbers correct as of May 2012. These

may be subject to change.

1Lens Storage Bag

2Lens Hood

3Lens Cap

4Lens Rear Cap

(The lens rear cap and lens cap are attached to

the interchangeable lens at the time of purchase.)

VFC4456 VYC1084 VYF3480 VFC4605

312 4

VQT4G28_ENG_SPA.book 5 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

Attaching/Detaching the Lens

≥Refer also to the camera’s owner’s manual for

attaching and detaching the lens.

∫Attaching the Lens

≥Check that the camera is turned off.

1 Turn the lens rear cap

to detach it.

A: Lens Rear Cap

2 Align the lens fitting

marks B(red marks) on

the camera body and the

lens and then rotate the

lens in the direction of

the arrow until it clicks.

•Do not press the lens release

button C when you attach a lens.

•Do not try to attach the lens when holding it at an

angle to the camera body as the lens mount may

get scratched.

•Check that the lens is attached correctly.

∫Detaching the Lens

≥Check that the camera is turned off.

While pressing on the

lens release button D,

rotate the lens toward

the arrow until it stops

and then remove.

•Attach the lens rear cap so

that the lens contact point does not get

scratched.

•Attach the body cap to the camera so no dirt or

dust will get inside the main unit.

∫Attaching and Detaching the Lens Cap

Pinch the lens cap

as shown in the

figure to attach or

detach.

•Be careful not to lose

the lens cap.

VQT4G28_ENG_SPA.book 6 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

∫Attaching the Lens Hood

(Supplied Accessory)

Insert the lens hood into

the lens with the short

sides at the top and

bottom, and turn in the

direction of the arrow

until it stops.

E: Fit to the mark

∫Temporarily Storing the Lens Hood

1 Turn the lens hood in the

direction of the arrow to

detach it.

2 Reverse the lens hood

and then attach it in the

same way as shown

previously.

•Hold the short sides of the flower shape lens

hood when attaching or detaching it.

•When taking pictures with the flash with the lens

hood attached, the lower portion of the screen

may turn dark (vignetting effect) and the control

of the flash may be disabled because the photo

flash may be obscured by the lens hood. We

recommend detaching the lens hood.

•When using the AF assist lamp in the dark,

detach the lens hood.

∫Attaching Filters

≥Vignetting may occur if using 2 or more

MC protectors (optional: DMW-LMCH58),

PL filters (optional: DMW-LPL58) or ND filters

(optional: DMW-LND58), or if using thick

protectors and/or filters.

≥The filter may become impossible to remove if

excessively tightened, so please refrain from

tightening it too strongly.

≥It is possible to attach the lens cap with the filter

already attached.

≥You cannot attach a conversion lens or adaptor to

this lens. A filter may be used, but attaching any

other element may cause damage to the lens.

VQT4G28_ENG_SPA.book 7 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

Names and Functions of

Components

1Lens surface

2Focus ring

Rotate to focus when taking pictures with manual

focus.

3Zoom ring

Rotate the zoom ring when you wish to take large

(tele) or wide (wide angle) pictures. (35 mm film

camera equivalent: 24 mm to 70 mm)

4[O.I.S.] switch

When the lens is attached to the camera the

stabilizer function is set to activate if the [O.I.S.]

switch is set to [ON].

≥We recommend setting the [O.I.S.] switch to [OFF]

when using a tripod.

≥The stabilizer function may not be effective in the

following cases.

–When there is a lot of jitter.

–When the zoom magnification is high.

–When using the digital zoom.

– When taking pictures while following a moving subject.

–When the shutter speed becomes slower to take

pictures indoors or in dark places.

5Contact points

6Lens fitting mark

7Lens mount rubber

Note

≥When flash recording with a close subject, the

light of the flash will be blocked by the lens and

part of the picture may be dark. Check the

distance from the subject when recording.

≥

When recording on the wide-angle side and using

the flash, the periphery of the screen may darken. In

such cases, we recommend using the external flash.

≥

If you zoom after focusing, focusingerrors may occur.

After zooming, please perform the focusing again.

5642 3

VQT4G28_ENG_SPA.book 8 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

Cautions for Use

Take care not to drop or knock the lens. Also

take care not to put a lot of pressure on the lens.

≥Take care not to drop the bag that you inserted the

lens in as it may damage the lens. The camera

may stop operating normally and pictures may no

longer be recorded.

When using pesticides and other volatile

substances around the camera make sure that

they do not get onto the lens.

≥

If such substances get onto the lens they can

damage the exterior case or cause the paint to peel.

Do not carry the unit when it is still attached to

the camera body.

≥

Under no circumstances should the unit be stored in

any of the following locations since doing so may

cause problems in operation or malfunctioning.

–In direct sunlight or on a beach in summer

–In locations with high temperatures and humidity

levels or where the changes in temperature and

humidity are acute

–Where there is fire

–Near heaters, air conditioners or humidifiers

–Where there is vibration

–Inside a vehicle

≥Refer also to the owner’s manual of the digital

camera.

≥When the unit is not going to be used for a

prolonged period, we recommend storing with a

desiccant (silica gel). Failure to do so may result in

performance failure caused by mold, etc. It is

recommended that you check the unit’s operation

prior to use.

≥Do not leave the lens in contact with rubber or

plastic products for extended periods of time.

≥Do not touch the lens contact point. Doing so can

cause failure of the unit.

≥Do not disassemble or alter the unit.

Do not use benzine, thinner, alcohol or other

similar cleaning agents to clean the lens glass or

exterior cabinet.

≥Using solvents can damage the lens or cause the

paint to peel.

≥

Wipe off any dust or fingerprints with a soft, dry cloth.

≥Use a dry, dust cloth to remove dirt and dust on

the zoom ring and focus ring.

≥Do not use a household detergent or a chemically

treated cloth.

A sound is heard when the camera is turned on or off.

A sound is heard from the lens when taking a

picture of a bright subject such as when

outdoors.

≥This is the sound of lens or aperture movement

and is not a malfunction.

Troubleshooting

VQT4G28_ENG_SPA.book 9 ページ２０１２年５月１６日　水曜日　午前１１時４３分

VQT4G28

Specifications

INTERCHANGEABLE LENS FOR DIGITAL CAMERA

“LUMIX G X VARIO 12–35 mm/F2.8 ASPH./POWER O.I.S.”

Focal length f=12 mm to 35 mm

(35 mm film camera equivalent: 24 mm to 70 mm)

Aperture type 7 diaphragm blades/circular aperture diaphragm

Aperture range F2.8

Minimum aperture value F22

Lens construction 14 elements in 9 groups

(4 aspherical lenses, 1 UED Lens, 1 UHR Lens)

Nano surface coating Yes

In focus distance 0.25 m (0.82 feet) to ¶ (from the focus distance reference line)

Maximum image magnification 0.17k(35 mm film camera equivalent: 0.34k)

Optical image stabilizer Available

[O.I.S.] switch Available (Switching ON/OFF)

Mount “Micro Four Thirds Mount”

Angle of view 84x(Wide) to 34x(Tele)

Filter diameter 58 mm (2.3 inch)

Max. diameter Approx. 67.6 mm (2.7 inch)

Overall length Approx. 73.8 mm (2.9 inch)

(from the tip of the lens to the base side of the lens mount)

Mass (Weight) Approx. 305 g (0.67 lb)

Dust-proof and splash-proof Yes

VQT4G28_ENG_SPA.book 10 ページ２０１２年５月１６日　水曜日　午前１１時４３分

Andere Handbücher für Lumix H-HS12035

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Kameraobjektiv Handbücher

Panasonic

Panasonic LUMIX H-HSA12035 Bedienungsanleitung

Panasonic

Panasonic Lumix H-ES200 Bedienungsanleitung

Panasonic

Panasonic WV-LA6B2 Bedienungsanleitung

Panasonic

Panasonic WV-LZ61 Bedienungsanleitung

Panasonic

Panasonic AG-LA7200G Bedienungsanleitung

Panasonic

Panasonic H-VSO14140 Bedienungsanleitung

Panasonic

Panasonic WV-LP6 Bedienungsanleitung

Panasonic

Panasonic Lumix H-F008 Bedienungsanleitung

Panasonic

Panasonic Wv-Lz81/10 Bedienungsanleitung

Panasonic

Panasonic LUMIX S PRO R1635 Bedienungsanleitung

Panasonic

Panasonic LUMIX H-H014AK Bedienungsanleitung

Panasonic

Panasonic DMW-GFC1 Bedienungsanleitung

Panasonic

Panasonic 5025232847358 Bedienungsanleitung

Panasonic

Panasonic H-FS35100 Bedienungsanleitung

Panasonic

Panasonic Lumix H-X015E-K Bedienungsanleitung

Panasonic

Panasonic LUMIX H-F007014E Bedienungsanleitung

Panasonic

Panasonic WV-LF9C3 Bedienungsanleitung

Panasonic

Panasonic VWCLT2 Bedienungsanleitung

Panasonic

Panasonic WV-LA36 Bedienungsanleitung

Panasonic

Panasonic WV-LA1208 Bedienungsanleitung

Panasonic

Panasonic ET-D3LEW10 Bedienungsanleitung

Panasonic

Panasonic H-FS35100PP Bedienungsanleitung

Panasonic

Panasonic VW-CLT1 Bedienungsanleitung

Panasonic

Panasonic Lumix H-HS35100 Bedienungsanleitung

Beliebte Kameraobjektiv Handbücher anderer Marken

THORLABS

THORLABS ELL15 Bedienungsanleitung

FUJICA

FUJICA ZC1000 Bedienungsanleitung

Tamron

Tamron A09 Handbuch

Sony

Sony SEL-55210 Bedienungsanleitung

Sony

Sony VCL-HG2037 Bedienungsanleitung

Honeywell

Honeywell HLM25V6F12 Bedienungsanleitung

Sony

Sony VCL-ST30 Bedienungsanleitung

Canon

Canon FD 35 - 70 mm Bedienungsanleitung

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... Bedienungsanleitung

ARRI

ARRI Lenses Bedienungsanleitung

Nikon

Nikon AF-S VR 24-120 f/3.5-5.6G IF-ED Bedienungsanleitung

Rokinon

Rokinon DS50M-C Bedienungsanleitung

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO Bedienungsanleitung

Sony

Sony VCL-DE07T Bedienungsanleitung

Canon

Canon FD Lens Handbuch

Tamron

Tamron A036 Bedienungsanleitung

Samsung

Samsung 20-50mm F3.5-5.6 ED II Bedienungsanleitung

Tamron

Tamron 272E Bedienungsanleitung