Panasonic MICROCOMPUTER MN103S Gebrauchsanweisung
1
1pin
124
28.3
9.95
26.3
43.7
29
85.4
Emulator
controller
( PX-PAD-103S )
Target board
12 12
Flexible cables
KC200-80N(n=2)
128pin-18mm : PX-ADP128LF18-103-YQS-K82
TOP
SIDE
BOTTOM
( Unit : mm )
A1
MN103S-Emulator
9.95
9.95
9.95
49.5
140 (Reference)
Emulator
controller
( PX-PAD-103S )
Emulator
controller
( PX-PAD-103S )
Target socket board
EXB-128SD-PA
(4 screws included)
<Sold separately>
Socket from TOKYO ELETECHCORPORATION
-NQPACK128SD or NQPACK128SD-SL
MN103S Emulator Target conversion adapter
Dimension / Connection diagrams
Replace screws (with
spacers and rubber feet)
included in the set.
Conversion board
PX-EX103S-128-82
(4 screws included)
Software & Solutions Development Center
Corporate System LSI Development Division
Semiconductor Company
Matsushita Electric Industrial Co., Ltd.
S/N. 081-31E-624A1-103S
16
Apr 14, 2008
23.5 29
29
Target board
25
YQPACK128SD
17
Panasonic
PanaXseries MN103S
2
Set name : PX-ADP128LF18-103-YQS-K82
Supported package: LQFP 128pin-18mm square
Supported product: MN103SFG5K (As of January 2008)
Components:
1.Conversion board n=1 *
(PX-EX103S-128-82, No.PB07017A0)
2.Joining screw n=4 *
3.80-signals flexible cable (KC200-80N) n=2
4.Target socket board (EXB128SD-PA) n=1
5.YQ-Guide(Special screw) n=4 *
6.Screw for the target socket board n=4 * #
7.YQPACK128SD n=1
8.Screw (with a spacer and a rubber foot) n=4 *
MN103S Emulator Target conversion adapter Components
1.Conversionboard
( PX-EX103S-128-82,
No.PB07017A0)
2.Joiningscrew
8.Screw (with a spacer and
a rubber foot)
3.80-signals flexible cable (KC200-80N)
5.YQ-Guide
6.Screw for the
target socket board
-This adapter requires a socket from TOKYO ELETECHCORPORATION separately.
Product number:
-NQPACK128SD or NQPACK128SD-SL (Supported for 128pin-18mm square)
“-SL”indicates that a long screw for fixing the target is included.
For details (size, foot pattern, etc.) of socket, refer to the website of TOKYO ELETECH
CORPORATION.
http://www.tetc.co.jp/e_index.htm
* :Common in the series of MN103S emulator adapter.
# : Not use at this set
Software & Solutions Development Center
Corporate System LSI Development Division
Semiconductor Company
Matsushita Electric Industrial Co., Ltd.
4. Target socket
board (EXB128SD-
PA)
7.YQPACK128SD
Ref) 5. YQ-Guide (Close up)
S/N. 081-31E-624A1-103S Apr 14, 2008
3
MN103S Emulator Target conversion adapter Installation
*1
*2
*2
*2
9. Connect the flexible cables with
the conversion board and the target socket board. 10. Installation has been completed.
*1
*2
1. Replace screws on the bottom
surface of the emulator housing by
screws with spacers and rubber
feet.
2. The screws have been replaced. 3. Insert the longer side of
joining screws into theemulator
housing.
4. Put the conversion board on the
joining screws.
(Make sure to join the mark ”A1”)
5-1. Tighten the rear two
screws evenly. 5-2. Tighten the front two
screws evenly.
Alternate
5-1 and 5-2
6. The conversion board has
been installed if there is
no space.
Note:
*1 When connecting parts, make sure to join the marks "1 pin" and "A1" respectively.
*2 Special attentions should be paid to needle-points of YQPACK and the conversion board
not to bend or break them. Software & Solutions Development Center
Corporate System LSI Development Division
Semiconductor Company
Matsushita Electric Industrial Co., Ltd.
Ex) Target board
7. Screw NQPACK (Sold separately)
and YQPACK by YQ-Guide.
(Note the corner cut)
8. Insert the target socket board
(EXB-128SD-PA)alongYQ-Guide.
(straight from on.)
S/N. 081-31E-624A1-103S Apr 14, 2008
4
MN103S Emulator Target conversion adapter Clock diagram
Emulator Target board
●Circuit diagram (Example: MN103SFG5K)
Flexible
cables
Conversion board
Target socket
board
-OSCI or OSCO from the target board is disabled.
The emulator uses oscillators or resonators on the conversion board.
The clock from the target board can use by short with solder.
-Neither oscillator/resonator nor condenser is included with
shipment. Prepare parts as needed.
-Short JP4-JP5with solderdepending on your parts.
-Recommended parts
X1 : Crystal resonator (Lead) :Kyocera Corporation HC-49/U-S
OSC1: Clock crystal oscillator : Kyocera Corporation FXO-31F
C1 : Condenser :1608 type
C2 : Condenser :1608 type
Software & Solutions Development Center
Corporate System LSI Development Division
Semiconductor Company
Matsushita Electric Industrial Co., Ltd.
Parts
(ex. Crystal unit, Condenser)
Solder
OSCO
(46)
OSCI
(47)
MCU
OSCO
OSCI
X34
Z34
X34
Z34 C2
C1
X1
(Lead)
JP4
２１
３４
OSC1
JP5
-Clock crystal oscillator
X34
（OSCO）
Z34
（OSCI）
BOTTOM VIEW
AM
CN1
X1
43
12
OSC1
C1
C2
JP5
JP4
B
D
F
H
・
・
・
36 33 31 29
-Crystal resonator (Lead)
BOTTOM VIEW
AM
X34
（OSCO）CN1
X1
43
12
OSC1
C1
C2
JP5
JP4
B
D
F
H
・
・
・
36 33 31 29
Z34
（OSCI）
-Target clock
-(externally excited oscillation)
Z34
（OSCI）
BOTTOM VIEW
AM
X34
（OSCO）CN1
X1
4 3
12
OSC1
C1
C2
JP5
JP4
B
D
F
H
・
・
・
36 33 31 29
S/N. 081-31E-624A1-103S Apr 14, 2008
5
Emulator
MCU Target board
VDD18
1.8V
C7
R
VSS
C8C11
C4
C3
C10
C12
VDD5
VDD18
VSS
VDD5
VSS
R
MN103S Emulator Target conversion adapter
Power supply / GND diagrams
VDD5
5V
VDD2
ON
-Short VDD5and VSS on the conversion board and those on the target
with short thick wiresrespectively.
-No condenser is included with shipment.Prepare parts as needed.
-Feature of condenser
3.5mm x 2.8mm : C4, C6, C7, C8, C9, C12
1608type : C3, C5 ,C10 , C11 (C1 , C2) Software & Solutions Development Center
Corporate System LSI Development Division
Semiconductor Company
Matsushita Electric Industrial Co., Ltd.
-Circuit diagram (Example: MN103SFG5K)
Conversion board
Flexible
CablesTarget socket
board
Short
(wire)
Short
(wire)
Test pin
Test pin
Test pin
VSS for
Emulator
USR pin
= 128 pins
: Regulator
VDD18
-Parts allocation on the conversion board
To target VDD To target GND
To target
GND
Reserve
C6
C5
C9
・・・・・
・・・・・
+
4 3
1 2OSC1
・・・
・・・
・・・
・・・
X1
C6
C5
・・・・・
・・・・・
+
C8C10
C9
C11
C12
+
+
CN1 CN2
VDD5
VSS VDD18
VDD5
VSS
VDD18
A
C
E
G
J
B
D
F
H
A1
9 7 5 3 1
C1 C2
JP10
JP30
JP20
JP5
+
C4
C3
+C7
JP4
VDD2
BOTTOM VIEW
To target
VDD
S/N. 081-31E-624A1-103S Apr 14, 2008
Andere Handbücher für MICROCOMPUTER MN103S
2
Inhaltsverzeichnis
Andere Panasonic Computerhardware Handbücher
Panasonic
Panasonic TY-UPK110 Bedienungsanleitung
Panasonic
Panasonic 2SA1018 Bedienungsanleitung
Panasonic
Panasonic A210 Bedienungsanleitung
Panasonic
Panasonic WJMPU955A - CENTRAL PROCESSING UNIT Bedienungsanleitung
Panasonic
Panasonic 2SA2174J Bedienungsanleitung
Panasonic
Panasonic Future Electronics BULLSEYE Bedienungsanleitung
Panasonic
Panasonic 2SC3311A Bedienungsanleitung
Panasonic
Panasonic 2SA2009G Bedienungsanleitung
Panasonic
Panasonic WJ-PB85T08 Bedienungsanleitung
Panasonic
Panasonic MALT062HG Bedienungsanleitung
Panasonic
Panasonic KX-TVM50 Bedienungsanleitung
Panasonic
Panasonic MAZC062D Bedienungsanleitung
Panasonic
Panasonic AW-360B10 Bedienungsanleitung
Panasonic
Panasonic 2SC2634 Bedienungsanleitung
Panasonic
Panasonic 2SA2078 Bedienungsanleitung
Panasonic
Panasonic MTM86628 Bedienungsanleitung
Panasonic
Panasonic TY-FB10HD Bedienungsanleitung
Panasonic
Panasonic FP7 Series Bedienungsanleitung
Panasonic
Panasonic WJ-HXE400 Bedienungsanleitung
Panasonic
Panasonic WJ-MPU855 Bedienungsanleitung
Beliebte Computerhardware Handbücher anderer Marken
EMC2
EMC2 VNX Series Betriebsanleitung
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Bedienungsanleitung
Gigabyte
Gigabyte B660M DS3H AX DDR4 Bedienungsanleitung
Raidon
Raidon iT2300 Bedienungsanleitung
National Instruments
National Instruments PXI-8186 Bedienungsanleitung
Hauppauge
Hauppauge WinTV-HVR-2250 Bedienungsanleitung
