Panasonic KX-HTS Series Bedienungsanleitung

Setup Reference guide for KX-HTS Series

(Tested with HTS32 Version 1.5)

“VozTelecom” SIP Trunk service

with External Router

Version 0.1(PSCEU) 29th, March 2017

Draft Version

SUMMARY

This document is a reference for configuring “VozTelecom” SIP trunks onto Panasonic HTS and

includes the settings required for Incoming Call DDI routing and Outgoing Call CLI presentation.

SIP trunk specific account details are provided to you by VozTelecom.

Attention:

This document was created based on the results of test environment accounts.

Panasonic cannot guarantee SIP Trunk operation in all environments, however as a result of

completing this Inter-Operability Test Panasonic will provide technical support for any issues

experienced an assist as far as possible in providing a resolution.

Please obtain relevant information from Service provider before configuration of SIP trunks.

Panasonic will not be held liable for any information provided in this guidance document.

Information used in this document is for interoperability testing.

Information and Specifications in this document are subject to change without notice.

Note

FAX

FAX T.38 is not supported and G711 Inband FAX communication is failed.

Unable to use FAX to PSTN when FAX message are detected on VozTelecom.

Hold

Hold is not working correctly.

Limitation: HTS won’t allow RE-INVITE (Hold) message from Server. Under study.

CLIR Calls

Limitation: HTS don’t support CLIR Outgoing Calls (Anonymous)

Table of Contents

(1) SIP Trunk, Extension Port Number and NAT Configuration: Page 4

(2) Network Settings: Page 5

(3) Trunk Port Attribution: Page 7

(4) Provisioning a SIP trunk: Page 8

(5) Incoming Call Routing: Page 12

(6) Outgoing Call CLI: Page 13

(7) CLIR Outgoing Call (Anonymous calls): Not supported: Page 14

(8)Appendix: Router/Firewall Port Forwarding: Page 15

With External Router Example

Existing User Network: 192.168.22.0 / Subnet Mask: 255.255.255.0 (/24)

Existing Router IP Address: 192.168.22.1,

Static DNS: Primary DNS Server 192.168.22.1 / Secondary DNS Server: 8.8.8.8

Note

Configure the settings according to the IP address system of the existing user network.

Also, set the IP address which does not duplicate other IP devices.

Internet

To Existing Router

To PC/HUB

LAN1: 192.168.0.101/24

WAN1: 192.168.22.99/24

Existing Router

(Enable DHCP)

KX-HDV series

(e.g., KX-HDV230)

Existing User Network

(192.168.22.0 /24)

HUB

(192.168.22.1/24)

(1) SIP Trunk, Extension Port Number and NAT Configuration

SIP Extension & SIP Trunk Common

Select [PBX Configuration] - [2. Extension] - [7.SIP Extension Property]

[SIP Extension & SIP Trunk Common]

1. Voice(RTP) UDP port No.(Server): Leave at 12000-

2. SIP Port Number: Leave at 5060

3. NAT Traversal: Leave Off

4. NAT – Fixed Global IP Address: Leave at 0.0.0.0

All other settings can be left at default.

Click [Apply]

Click [Apply Now]

(2) Network Settings

Network Configuration WAN Setting

Select [Network Configuration] - [3.WAN]– [1.WAN Setting] and Select [WAN 1 Channel]

Click [Modify]

HTS WAN-1 IP: 192.168.22.99 (Example)

Assigned HTS WAN IP address by user network administrator

1. WAN Type: Fix IP

2. WAN Connection Name: Leave WAN1_Fix_IP - Reference only-

3. IP address, by your ISP: 192.168.22.99 (Enter your actual IP address)

4. Subnet Mask: 255.255.255.0

5. ISP Gateway Address: 192.168.22.1

6. Static DNS Change to Enable

7. Primary DNS Server: 192.168.22.1

8. Secondary DNS Server: 8.8.8.8

Click [Apply]

LAN Settings

Go to [Network Configuration] - [4.LAN] - [2.LAN Settings]

1. IP Address: 192.168.0.101

2. Subnet Mask: 255.255.255.0

3. DHCP Mode: Server

[DHCP server]

4. IP Pool Staring Address: Leave 192.168.0.102

5. IP Pool Ending Address: Leave 192.168.0.254

6. Lease Time: Leave One day

(3) Trunk Port Attribution

Select [PBX Configuration] -[3.Trunk]- [1.Port] and click [Edit / CO Line Number 1 to 8]

[CO Line Number 1]

1. Attribution: SIP Carrier - 1

2. Trunk Group: Leave at 1

Click [Apply]

Click [Apply Now]

Example, Configure “CO-Line 1-2: SIP Carrier-1, Other CO-Line: No Connect”

SIP Trunk 2 Channels

Others 6 CO Line are not used,

Configure to No Connect from

Analog Line.

(4) Provisioning the SIP Trunk

SIP Trunk Property - Common

Select [PBX Configuration] - [3.Trunk] - [7. SIP Trunk Property] - [Common]

1. DNS SRV Record Resolve Ability: Leave Disable

[Register]

2. Register Sending Interval (s): Leave at 3600

3. Register Resending Interval (s): Leave at 300

4. RTCP Sending Interval (s): Leave at 5

SIP Trunk Property continued – SIP Carrier-1

[SIP Carrier-1]

1. Provider Name: Enter a name – reference only

2. SIP Server Name: voztele.com

3. SIP Server IP Address: Leave at 0.0.0.0

4. SIP Server port Number: Leave at 5060

5. SIP Server Domain: voztele.com

6. Subscriber Number: Not required

[Account]

7. User name:

Enter the SIP Account (User name) as supplied by VozTelecom.

(Note this is user name without @voztele.com)

For example: SIP Account (User name) = 3400900000

Enter: 3400900000

8. Authentication ID: Enter the Authentication ID as supplied by VozTelecom.

(Note this is user name without @ voztele.com)

For example: Authentication ID = 3400900000

Enter: 3400900000

9. Authentication Password:

Enter the Authentication Password as supplied by VozTelecom.

For example: Authentication Password = passwordABCD

Enter: passwordABCD

[Register]

10. Register Ability: Enable

SIP Trunk Property continued – SIP Carrier-1

[Calling Party]

1. Header Type: Leave From Header

2. Host Name: Not required

3. Format: Leave Without “+”

4. Send CLIP of caller when call from SIP

Carrier is forwarded to same SIP carrier: Leave Enable

[Called Party]

5. Format: Leave Without “+”

Andere Handbücher für KX-HTS Series

Inhaltsverzeichnis

Andere Panasonic Konferenzsystem Handbücher

Panasonic

Panasonic KX-NS300 Bedienungsanleitung

Panasonic

Panasonic SC-HG1-USB Bedienungsanleitung

Panasonic

Panasonic WX-CT420 Bedienungsanleitung

Panasonic

Panasonic WX-CT2020 Bedienungsanleitung

Panasonic

Panasonic WGAV120 - VIDEO TRANSMISSION Bedienungsanleitung

Panasonic

Panasonic KX-VC300 Bedienungsanleitung

Panasonic

Panasonic KX-NS700G Bedienungsanleitung

Panasonic

Panasonic KX-VC1300 Bedienungsanleitung

Panasonic

Panasonic KX-VC1600 Bedienungsanleitung

Panasonic

Panasonic KX-NS500 Betriebsanleitung

Panasonic

Panasonic KX-VC300 Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Panasonic

Panasonic Attune WX-C3010 Bedienungsanleitung

Panasonic

Panasonic KX-HTS Series Bedienungsanleitung

Panasonic

Panasonic VoiceSonic KX-NT700 Bedienungsanleitung

Panasonic

Panasonic SC-HG1-ETC Bedienungsanleitung

Panasonic

Panasonic KX-VC300 Bedienungsanleitung

Panasonic

Panasonic KX-TS730C Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Panasonic

Panasonic KX-HTS Series Bedienungsanleitung

Panasonic

Panasonic KX-TVP50 Bedienungsanleitung

Panasonic

Panasonic KXF-4T3C Bedienungsanleitung

Panasonic

Panasonic KX-VC1600 Montageanleitung

Panasonic

Panasonic KX-VC1600SX Bedienungsanleitung

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung

AXIWI

AXIWI AT-350 Bedienungsanleitung

AT&T

AT&T Spirit Communications System Installationsanleitung