Panasonic 10GBASE-SR SFP+ Bedienungsanleitung

PN59021-TH/PN59023-TH

PN59021-MY/PN59023-MY

PN59021-ID/PN59023-ID

PN59021-SG/PN59023-SG

PN59021-NZ/PN59023-NZ

Model No.

10GBASE-LR SFP+ Module (SFP+10GLR)

10GBASE-SR SFP+ Module 10GBASE-LR SFP+ Module

PN59021 PN59023

IEEE802.3ae

10GBASE-SR

IEEE802.3ae

10GBASE-LR

SFF-8472 (Diagnostic Monitoring Interface)

850 nm 1310 nm

DC 3.3 V

0 to 50°C /20 to 80% RH (No dew condensation)

10GBASE-SR SFP+ Module (SFP+10GSR)

Installation Guide

 Thank you for purchasing our product.

 This document provides important information about safe and proper

operations of this SFP+ Module.

 Please read the "Important Safety Instructions".

 Any problems or damages resulting from disassembly

of this SFP+ Module by customers are not covered by

the warranty.

 The instruction guide can be downloaded from the

following URL.

https://panasonic.co.jp/ew/pewnw/english/datadownload/index.html

C1214-20122 Printed in Japan

Product Outline

Specifications

Product name

Module No.

Standards

Compatible cable

Optical wavelength

Operating voltage

Power consumption

Operating ambient

temperature/humidity

Fiber optic port

connector type

Accessories

MMF cable

LC connector (Duplex)

SMF cable

1.0 W max 1.25 W max

External dimensions

Mass (Weight) 17 g

9 mm (Height) x 14 mm (Width) x 57 mm (Depth)

(Excluding protruding sections)

Installation Guide (this document)

x 1(*)

＊Just the PN59021-TH/PN59023-TH has 1 Installation Guide in

Thai (at total of 2 guides)

Prot ection cap of the fiber optic port (Attached to the module)

x 1

10GBASE-SR SFP+ Module and 10GBASE-LR SFP+ Module are SFP (Small Form-Factor

Pluggable) modules to be connected to a Panasonic Ethernet Switch’s SFP+ extension

slot.

MMF: Multi Mode Fiber SMF: Single Mode Fiber

1. Securely connect the SFP+ Module to the

SFP+ extension slot of a Panasonic Ethernet

Switch.

2. Remove the protective cap of the SFP+

Module’s fiber optic port.

3. Connect a fiber optic cable that meets the

standards specified for the SFP+ Module.

4. Connect another SFP+ Module of the same

model number on the opposite end.

1. Unlatch the fiber optic cable and remove it from the

SFP+ Module.

2. Pull down the lever of the SFP+ Module 90 degrees as

shown in the figure to unlatch the SFP+ Module.

3. Pull out the SFP+ Module.

Installation

Removal

SFP+ extension slot

SFP+ Module

Fiber optic port Ethernet Switch

Lever

2-12-7, Higashi-Shimbashi, Minato-ku, Tokyo Japan, 105-0021

Panasonic Electric Works Networks Co.,Ltd.

Panasonic Electric Works Networks Co.,Ltd. 2022

This chapter contains important safety instructions for preventing bodily injury

and/or property damage. Please read carefully, and follow them at all times.

Do not look at the laser light.

Deviation could lead to visual impairment. (Class 1 Laser Product)

Do not disassemble and/or modify this SFP+ Module.

Deviation could lead to fire, electric shock, and/or equipment failure.

 Severity of bodily injury and/or property damage, which could result from incorrect

use of the SFP+ Module, are explained below.

 The following symbols are used to classify and describe the type of instructions to be

observed.

Important Safety Instructions

This symbol indicates safety instructions.

Deviation from these instructions could lead to

bodily injury and/or property damage.

CAUTION

This symbol indicates a potential hazard

that could result in serious injury or death.

WARNING

This symbol is used to alert

users what they must do.

This symbol is used to alert

users what they must not do.

WARNING

CAUTION

Basic Instructions for the Use of This Product

Handle the SFP+ Module carefully so that fingers or hands may not be

injured by its end connected to the Ethernet Switch or the SFP+

extension slot of the Ethernet Switch.

For inspection and/or repair, consult the retailer.

Correctly and securely connect the SFP+ Module to the SFP+ extension slot

of a Panasonic Ethernet Switch.

Check the connector of the fiber optic cable for dirt and dust. If it is dirty,

be sure to clean it before connecting it to the fiber optic port.

Remove the SFP+ Module from the SFP+ extension slot before cleaning the

SFP+ Module.

Do not touch the metal terminal or place electrically-charged objects in the

proximity of the SFP+ Module. Static electricity could lead to breakdown.

Please use the SFP+ Module in locations where the ambient temperature is

within the range of 0 to 50°C.

Do not use the SFP+ Module in any condition where the specification limits

are exceeded.

Deviation could lead to malfunctions.

1. Panasonic will not be liable for any damage resulting from the operation not in

accordance with this document or the loss of communications, which may or

may not be caused by failure and/or malfunction of this product.

2. The contents described in this document may be changed without prior notice.

3. For any question, please contact the retailer where you purchased the product.

 The port LED of the Ethernet Switch to which the SFP+ Module connected is not lit.

Is the Ethernet Switch powered on?

Is the SFP+ Module securely connected to the target SFP+ extension slot of the

Ethernet Switch?

Is the connected port of the Ethernet Switch enabled?

Is the cable correctly connected to the target port?

Is a conforming cable used? Is the same type of SFP+ Module used on the

opposite end?

Is the equipment connected to the target port compliant with the specified

standards?

Ensure that 100BASE-FX or 1000BASE-X equipment is not connected.

Troubleshooting

If you find any problem, please take the following steps to check.

Dieses Handbuch passt für folgende Modelle

Andere Panasonic Steuereinheit Handbücher

Panasonic

Panasonic SF-C14EX-01 Bedienungsanleitung

Panasonic

Panasonic AG-EC4G Bedienungsanleitung

Panasonic

Panasonic SF-C14EX-01 Bedienungsanleitung

Panasonic

Panasonic CF-BAP0128U Bedienungsanleitung

Panasonic

Panasonic PAN1326C Betriebsanleitung

Panasonic

Panasonic AK-HCU250P Bedienungsanleitung

Panasonic

Panasonic WVPS11B - CAMERA DRIVE UNIT Bedienungsanleitung

Panasonic

Panasonic SF-AC Bedienungsanleitung

Panasonic

Panasonic CF-BAX04GU Bedienungsanleitung

Panasonic

Panasonic PAN301 Series Kurzanleitung zur Einrichtung

Panasonic

Panasonic ELC500 Bedienungsanleitung

Panasonic

Panasonic CF-BAD04GU Bedienungsanleitung

Panasonic

Panasonic CF-BAD02GU Bedienungsanleitung

Panasonic

Panasonic HIT VBHN340SA17E Bedienungsanleitung

Panasonic

Panasonic AKHCU200 Bedienungsanleitung

Panasonic

Panasonic SF-C21 Bedienungsanleitung

Panasonic

Panasonic WH-ADC0309H3E5 Bedienungsanleitung

Panasonic

Panasonic WVCU650 - SYSTEM CONTROLLER ADDENDUM Bedienungsanleitung

Panasonic

Panasonic WX-CC411A Bedienungsanleitung

Panasonic

Panasonic CZ-RCC5 Bedienungsanleitung

Panasonic

Panasonic SF-C10 Series Bedienungsanleitung

Panasonic

Panasonic KX-T7603X Bedienungsanleitung

Panasonic

Panasonic CARICAM AU-VSHL2G Bedienungsanleitung

Panasonic

Panasonic SF4D Series Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung