Caution :
Failure to follow these instructions may
cause a risk of personal property damage.
Do not step on or drop any hard article down
on top plate.
If it is cracked or broken up, it may cause overheating,
abnormal operation or electric shock.
Do not touch top plate or other heating parts
when the unit is running.
It may cause burn.
Use heat resistant materials for the
countertop.
The material of the countertop should have heat-q
resistancy equal to or exceeding “laminated
thermosetting high-pressure decorative sheets”.
If the materials are not heat resistant, it may cause
deformation or fire.
*Do not use varnished materials as they might be
discolored.
Warning :
Failure to follow these instructions may
cause a risk of personal injury or death.
Follow these instructions when installing the
unit.
If it is installed improperly, it may cause electric
leakage or overheat.
Install a dedicated circuit of single phase
220V/20A with a breaker for power supply.
If dedicated circuit is not connected compatibly, it may
cause abnormal heat on electric wires.
Electrical work should be done by a qualified
electrician.
If the connection or repair is not completed, it may
cause electric leakage or overheat.
Never disassemble, repair or modify the unit.
Any attempt to do so may cause the unit to operate
abnormally and may result in danger.
Install the ground completely with related law.
Installation of ground can avoid electric shock once
electric leakage occurs.
The ground should be installed by a qualified
electrician.
If the installation is not proper, electric leakage may
occur.
If the supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or related qualified electrician in order
to avoid a hazard.
Safety precautions for installation
1
Please observe these precautions fully
Dimensions
2
(measurement: mm)
Top view Side view
