Panasonic KX-TC1484CB Bedienungsanleitung

900 MHz Cordless Phone

Operating Instructions

Model No. KX-TC1484CB

Pulse-or-tone dialing capability

PLEASE READ BEFORE USE AND SAVE.

For assistance, please call 1-800-561-5505 or visit us at

www.panasonic.ca

Charge the battery for about 15 hours before initial use.

Preparation Basic Operation Advanced Operation Useful Information

Call Display Compatible

PQQX13914ZA F0603-0 D

E-PQQX13914ZA-103.10.14:04PMページ1

Accessories (included)

∑AC Adaptor (p. 7)

one

∑Telephone Line Cord (p. 7)

one

∑Handset Cover (p. 8)

one

∑Belt Clip (p. 27)

one

∑Battery (p. 8)

one

Thank you for purchasing your new Panasonic cordless

telephone.

Call Display and Call Waiting Service, where available, are telephone

company services. After subscribing to Call Display this phone will

display a caller’s name and phone number. Visual Call Waiting, which

displays a second caller’s name and phone number while the user is on

another call, requires a subscription to both Call Display and Call

Waiting.

Before Initial Use

E-PQQX13914ZA-103.10.14:04PMページ2

For Best Performance

Battery Charge

A rechargeable Ni-Cd battery powers the

handset. Charge the battery for about

15 hours before initial use (p. 8).

Raise the

antenna.

Away from electrical appliances

such as a TV or personal computer.

In a HIGH and CENTRAL location

with no obstructions such as walls.

Base Unit Location

Calls are transmitted between the base unit and the handset using

wireless radio waves. For maximum distance and noise-free

operation, the recommended base unit location is:

E-PQQX13914ZA-103.10.14:04PMページ3

Preparation

Location of Controls ............... 5

Settings ..................................... 7

Connections ............................. 7

Installing the Battery in the

Handset.................................. 8

Battery Charge ......................... 8

Ringer Volume ......................... 9

Programmable Functions ...... 10

Display Language .................. 10

Dialing Mode .......................... 10

Basic Operation

Making Calls ........................... 11

Answering Calls ..................... 12

Call Display Service ............... 13

Using the Caller List .............. 15

Viewing the Caller List............ 15

Calling Back from the Caller

List........................................ 17

Editing the Caller’s Phone

Number ................................ 17

Storing Caller List Information

in the Phone Book................ 18

Erasing Caller List

Information ........................... 19

Contents

Advanced Operation

Phone Book ............................ 20

Storing Names and

Numbers............................... 20

Entering Names and

Symbols ............................... 21

Finding Stored Items .............. 22

Dialing .................................... 22

Editing .................................... 23

Erasing ................................... 24

Special Features..................... 25

Automatic Security Code

Setting .................................. 25

Handset Locator..................... 25

Temporary Tone Dialing

(For Rotary or Pulse Service

Users) ................................ 25

How to Use the PAUSE Button

(For PBX Line/Long Distance

Calls)................................... 26

For Call Waiting Service

Users.................................... 26

Useful Information

Belt Clip................................... 27

Optional Headset.................... 27

Wall Mounting......................... 28

Adding Another Phone .......... 30

Battery Replacement.............. 31

Troubleshooting ..................... 32

Important Information ........... 35

Safety Instructions ................. 36

Speciﬁcations ......................... 37

Warranty.................................. 38

E-PQQX13914ZA-103.10.14:04PMページ4

Location of Controls

“

Preparation

Base unit

Charge Contacts

(p. 9)

IN USE/CHARGE Indicator (p. 8, 25)

(HANDSET\LOCATOR) (p. 25)

Antenna (p. 3)

Hook (p. 28)

E-PQQX13914ZA-203.10.14:05PMページ5

“

Location of Controls

Handset

Antenna

(PAUSE/REDIAL)

(p. 11, 26)

Charge Contacts (p. 9)

(––

–

/FLASH)

(p. 11, 12, 26)

(AUTO/PROGRAM)

(p. 18, 20, 22)

(MUTE/CLEAR)

(p. 12, 19, 24)

(OFF) (p. 11, 15)

RINGER Selector

(p. 9)

($) (TONE) (p. 25)

(CH/FUNCTION) (Channel)

(p. 10, 11)

LOUD/SEARCH Key

((‹), (›)) (see below)

Display (p. 14)

(EDIT) (p. 10, 17, 20)

Headset Jack (p. 27)

How to use the LOUD/SEARCH key

This key has two active areas that are indicated by arrows.

≥Pressing the up or down arrow allows you

≥—to enter into the Caller List,

≥—to select the function items,

≥—to scroll through your phone book and the Caller

List, and

≥—to adjust the receiver volume on the handset.

LOUD/

Throughout these Operating Instructions, the LOUD/SEARCH key is

indicated by the arrows (‹) or (›).

E-PQQX13914ZA-203.10.14:05PMページ6

Settings

“

Preparation

Connections

Power Outlet

(AC 120 V, 60 Hz)

Telephone

Line Cord

Single-Line

Telephone Jack

(CA11A)

Raise the

antenna.

AC Adaptor

Fasten the AC adaptor

cord to prevent it from being

disconnected.

Hook

≥USE ONLY WITH Panasonic AC ADAPTOR PQWATC1461M.

≥The AC adaptor must remain connected at all times. (It is normal for the adaptor

to feel warm during use.)

≥To connect a standard telephone on the same line, see page 30.

≥If your unit is connected to a PBX which does not support Call Display, you

cannot access those services.

E-PQQX13914ZA-203.10.14:05PMページ7

“

Settings

Battery Charge

Place the handset on the base unit and charge for about 15 hours before

initial use.

≥The IN USE/CHARGE indicator lights

and a beep sounds.

IN USE/CHARGE Indicator

Installing the Battery in the Handset

Install the battery and close the handset cover, locking it into place.

Black

Lead Red

Lead

Recharge

Recharge the battery when:

—“RECHARGE”is displayed,

—“ ” is displayed, or

—the handset beeps intermittently while it is in

use.

RECHARGE

E-PQQX13914ZA-203.10.14:05PMページ8

Preparation

Battery information

After your Panasonic battery is fully charged (p. 8):

≥The battery operating time may be shortened depending on usage conditions,

such as viewing the Caller List or phone book, and ambient temperature.

≥Clean the handset and the base unit charge contacts with a soft, dry cloth

once a month. Clean more often if the unit is subject to grease, dust or

high humidity. Otherwise the battery may not charge properly.

≥If the battery is fully charged, you do not have to place the handset on the base

unit until “RECHARGE”and “”are displayed. This will maximize the battery life.

≥The battery cannot be overcharged.

Standby Mode (While the handset is off the base unit)

The handset goes into the standby mode after you ﬁnish using the

handset (making/answering a call, viewing the Caller List or phone book

etc.). The display shows “STANDBY”.

The battery operating time is conserved in this mode.

Operation Operating time

While in use (TALK) Up to about 5 hours

Up to about 5 daysWhile not in use (Standby)

Ringer Volume

Set the RINGER selector to ON or OFF.

≥When set to OFF, the unit will not ring.

E-PQQX13914ZA-203.10.14:05PMページ9

Programmable Functions

Display Language

You can select ENGLISH, SPANISH or FRENCH as the display

language. Your phone comes from the factory set to ENGLISH. If you

want to select the other language, program as follows:

1Press (CH/FUNCTION).

≥The current setting is displayed.

2Select “ENG”(ENGLISH), “ESP”(SPANISH)

or “FRA”(FRENCH) by using (›) or (‹).

3Press (EDIT) to save.

≥A beep sounds.

≥The handset will return to the standby mode.

LANGUAGE: ENG

LANGUE: FRA

You can program the following function items using the handset near

the base unit.

Make sure the unit is in the standby mode.

≥You can exit the programming mode at any time by pressing (OFF).

≥If you do not press any buttons for 60 seconds, the unit will return to the standby

mode.

Dialing Mode

If you have touch tone service, set to TONE. If rotary or pulse service is

used, set to PULSE. Your phone comes from the factory set to TONE.

1Press (CH/FUNCTION) twice.

≥The current setting is displayed.

2Select “PULSE”or “TONE”by using (›) or

(‹).

3Press (EDIT) to save.

≥A beep sounds.

≥The handset will return to the standby mode.

DIAL MODE: TONE

DIAL MODE:PULSE

e.g. FRENCH is selected.

E-PQQX13914ZA-203.10.14:05PMページ10

Inhaltsverzeichnis

Andere Panasonic Schnurloses Telefon Handbücher

Panasonic

Panasonic KX-TG5621 Bedienungsanleitung

Panasonic

Panasonic KX-TGD510 Bedienungsanleitung

Panasonic

Panasonic KX-TG5230AL Bedienungsanleitung

Panasonic

Panasonic KX-TG8421HGN Bedienungsanleitung

Panasonic

Panasonic KX-TG2421NZ Bedienungsanleitung

Panasonic

Panasonic KX-TC1005ALB Bedienungsanleitung

Panasonic

Panasonic KX-TCD410ALM Bedienungsanleitung

Panasonic

Panasonic KX-TG8231 Bedienungsanleitung

Panasonic

Panasonic KX-TCD560E Bedienungsanleitung

Panasonic

Panasonic KX-FKN551 Bedienungsanleitung

Panasonic

Panasonic KX-TCD400AL Bedienungsanleitung

Panasonic

Panasonic KX-TGC210BL Bedienungsanleitung

Panasonic

Panasonic KX-TG3620 Bedienungsanleitung

Panasonic

Panasonic KX-TGF770 Series Bedienungsanleitung

Panasonic

Panasonic KX-TG8301FX Bedienungsanleitung

Panasonic

Panasonic KX-TGH260BX Bedienungsanleitung

Panasonic

Panasonic KX-TG2480BXS Bedienungsanleitung

Panasonic

Panasonic KXDT321 - DIGITAL PROPRIETARY TELEPHONE Bedienungsanleitung

Panasonic

Panasonic KX-TGD510HK Bedienungsanleitung

Panasonic

Panasonic KX-TG2620 Bedienungsanleitung

Panasonic

Panasonic KXTG210B - 2.4 GHZ CORDLESS PHO Bedienungsanleitung

Panasonic

Panasonic KX-TD7895 - Digital Spread Spedtrum... Bedienungsanleitung

Panasonic

Panasonic KX-TC907B Bedienungsanleitung

Panasonic

Panasonic KX-TG2240BXS Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Uniden

Uniden D1785 Series Bedienungsanleitung

Binatone

Binatone Style 1820 Bedienungsanleitung