Panasonic KX-TG2431. Bedienungsanleitung

Printed in U.S.A. PQQW13542ZA DA1104SY0

Please read the operating instructions for further details.

Connections

Base unit

Charger unit (KX-TG2432 only)

Note:

LUse only the included Panasonic AC adaptor PQLV19.

LMake sure that the AC adaptor and telephone line cords are plugged into the unit

properly.

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel

warm during use.)

To single-line telephone jack (RJ11C)

Telephone line cord

To power outlet (120 V AC, 60 Hz)

AC adaptor

Raise the

antenna.

Fasten the AC adaptor cord.

Hooks

Fasten the AC adaptor cord to prevent

it from being disconnected.

AC adaptor

To power outlet (120 V AC, 60 Hz)

Bottom of

the charger

Hooks

Model No. KX-TG2431

Model No. KX-TG2432

Quick Guide

TG2431_2432_QG(e).fm Page 1 Thursday, November 25, 2004 10:08 AM

–2 –

Battery installation

1Insert the battery (1), and press it down

until it snaps into the compartment (2).

2Close the handset cover.

Battery charge

Place the handset on the base unit or charger for 6 hours before initial use.

Base unit Charger unit (KX-TG2432 only)

Navigator key Soft keys

The handset navigator key can be used to

navigate through menus and to select

items shown on the display, by pressing

{^}, {V}, {<}, or {>}.

The handset features 2 soft keys. By

pressing a soft key, you can select the

function displayed directly above it.

CHARGE indicator

CHARGE

indicator

Rcvd Phone

calls book

TG2431_2432_QG(e).fm Page 2 Thursday, November 25, 2004 10:08 AM

–3 –

Setting the date and time

Set the date and time so that the unit will announce the day and time each message was

recorded by the answering system when you play back messages.

1Press {MENU}.

2Press {4}.

3Enter the current month, day, and

year by selecting 2 digits for each.

Example: June 15, 2005

Press {0}{6}{1}{5}{0}{5}.

4Enter the current hour and minute (12-

hour clock format) by selecting 2 digits

for each.

Example: 9:30 PM

Press {0}{9}{3}{0}.

5Select “AM” or “PM” by pressing {AM/

PM}.

6Press {Save}, then press {OFF}.

Recording your greeting message

You can record your own greeting message (max. 2 minutes) that will be played when the

answering system answers a call. If you do not record a greeting message, a pre-recorded

greeting message will be used.

1Press {GREETING REC}.

LThe unit announces “To record

greeting, press record again.”

2Within 10 seconds, press {GREETING

REC}again.

3After the unit beeps, speak clearly

about 20 cm (8 inches) away from the

MIC.

4To stop recording, press {GREETING

REC}or {STOP}.

To play back the greeting message

Press {GREETING CHECK}.

Date:12.31.2005

Time:12:00 AM

AM/PM Save

Date:06.15.2005

Time:12:00 AM

AM/PM Save

Date:06.15.2005

Time:09:30 AM

AM/PM Save

{GREETING REC}

MIC

{STOP}

{GREETING CHECK}

TG2431_2432_QG(e).fm Page 3 Thursday, November 25, 2004 10:08 AM

–4 –

Basic operation

Feature Operation

To make a call Press {C}, then dial the phone number.

To turn on the speakerphone Press {s}.

To hang up Press {OFF}.

To adjust the receiver or speaker

volume

While using the receiver or speaker, press {V} or {^}

repeatedly.

To redial the last number dialed Press {C}, then press {REDIAL}.

To make a call using the redial

list

Press {REDIAL}. Scroll to the desired number by

pressing {V} or {^}. Then, press {C}.

To answer a call Press {C}.

To put an outside call on hold KX-TG2431:

Press {HOLD}during an outside call.

KX-TG2432:

Press {HOLD}2 times during an outside call.

Answering system

Feature Operation

To turn the answering system

on/off

Press {ANSWER ON}.

To listen to new messages When the MESSAGE indicator FLASHES on the

base unit, press {MESSAGE}.

To listen to old messages When the MESSAGE indicator DOES NOT FLASH,

press {MESSAGE}.

To erase a message Press {ERASE}while the message is being played.

To erase all messages Press {ERASE}2 times while the base unit is not in

use.

TG2431_2432_QG(e).fm Page 4 Thursday, November 25, 2004 10:08 AM

–5 –

Phonebook

Adding items to the phonebook

1Press {Phonebook}.

2Press {Add}.

Example:

3Enter the name (max. 16 characters).

4Press {Next}.

5Enter the phone number (max. 32

digits).

6Press {Next}.

Example:

7Press {Save}.

LTo add other items, repeat from step

8Press {OFF}.

Calling someone in the phonebook

1Press {Phonebook}.

2Press {V} or {^} repeatedly to display the desired item.

LTo exit the phonebook, press {OFF}.

3Press {C}, {s}, or {Call}.

Caller list

Viewing the caller list and calling back

1Press {V} or {^} to enter the caller list.

2Press {V} to search from the most

recent call, or press {^} to search

from the oldest call.

LThe caller’s name and phone

number are displayed alternately.

Example:

LTo exit the caller list, press {OFF}.

3Press {C} or {s}.

Displayed symbols

LIf the same caller calls more than once,

it will be displayed with the number

(“×2” to “×9”). Only the date and time

of the most recent call will be stored.

LA Qis displayed next to items which

have already been viewed or

answered on this handset.

Rcvd Phone

calls book

Phonebook

7 items

Add Search

Enter name

Back Next

Enter phone no.

Tom

555-765-4321

Edit Save

SMITH,JACK

3:10P JUN.29

1-555-333-4444

3:10P JUN.29

TG2431_2432_QG(e).fm Page 5 Thursday, November 25, 2004 10:08 AM

–6 –

Programming via direct commands

You can program most features using “direct commands”—special codes that take you

directly to the feature you wish to program and allow you to select the desired setting.

There is no need to scroll through the unit’s menus.

1Press {MENU}.

2Enter the desired feature code (shown below).

3Enter the desired setting code (shown below).

4Press {Save}.

5Press {OFF}to exit programming mode.

Direct commands chart

Feature Feature code Setting code

Ringer volume {1}{1} {1}: Low {2}: Medium

{3}: High {0}: Off

Ringer tone {1}{2} {1}–{3}: Tone pattern 1–3

{4}–{7}: Melody pattern 1–4

Voice enhancer {5} {1}: On {0}: Off

LCD contrast {0}{1} {1}–{6}: Level 1–6

Auto talk {0}{3} {1}: On {0}: Off

Set dial mode {0}{5}{1} {1}: Pulse {2}: Tone

Ring count {0}{6}{1} {2}–{7}: 2–7 rings

{0}: Toll saver

Recording time {0}{6}{2} {1}: 1 minute

{2}: 2 minutes

{3}: 3 minutes

{0}: Greeting only

Change language {0}{8} {1}: English {2}: Spanish

Message alert {0}{#} {1}: On {0}: Off

TG2431_2432_QG(e).fm Page 6 Thursday, November 25, 2004 10:08 AM

–7 –

Important information about subscription services

In order to use Caller ID, Call Waiting, or Call Waiting Caller ID (CWID), you must

first contact your telephone company and subscribe to the desired service.

LFor more information, contact your telephone company.

If the Call Waiting Caller ID (CWID) feature does not function:

LYou may need to contact your telephone company to activate this specific service, even

if you already subscribed to both Caller ID and Call Waiting with Caller ID services

(CWID).

If you subscribe to a flat-rate bundle service that includes Caller ID, Call Waiting,

Voice Mail, and unlimited local/regional/long distance calls, please read the

following:

LTo use the Voice Mail service provided by the telephone company rather than the unit’s

answering system, turn off the answering system by pressing {ANSWER ON}on the

base unit.

This unit does not have an indicator to indicate if there are new messages in your

mailbox service.

LTo use this unit’s answering system rather than the Voice Mail service provided by your

telephone company, please contact your telephone company to deactivate your Voice

Mail service.

If the telephone company cannot do this, set this unit’s “Ring count” setting so that

this unit’s answering system answers calls before the telephone company’s voice mail

service tries to answer your calls. It is necessary to check the ring count required to

activate the Voice Mail service provided by your telephone company before changing

this setting.

Example: To set the ring count to “2”, press {MENU}{0}{6}{1}. When “Ring count”

is displayed, press {2}{Save}.

TG2431_2432_QG(e).fm Page 7 Thursday, November 25, 2004 10:08 AM

1Read this Quick Guide or Operating

Instructions

2Visit our website:

http://www.panasonic.com/

consumersupport

3Contact us via the web at:

http://www.panasonic.com/contactinfo

4Call us at: 1-800-211-PANA (7262)

To order a replacement batteries,

1-800-332-5368

http://www.panasonic.com/batterystore

IMPORTANT!

If your product is not

working properly. . .

TG2431_2432_QG(e).fm Page 8 Thursday, November 25, 2004 10:08 AM

Andere Handbücher für KX-TG2431.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Schnurloses Telefon Handbücher

Panasonic

Panasonic KX-TG6611CX Bedienungsanleitung

Panasonic

Panasonic KX-TGP500 Bedienungsanleitung

Panasonic

Panasonic KX-TG6021C Bedienungsanleitung

Panasonic

Panasonic KX-TG2560 Bedienungsanleitung

Panasonic

Panasonic KX-TC1430W Bedienungsanleitung

Panasonic

Panasonic KX-PRX120 Bedienungsanleitung

Panasonic

Panasonic KX-TG8052C Bedienungsanleitung

Panasonic

Panasonic KX-TG4731 Bedienungsanleitung

Panasonic

Panasonic KX-TCD300FX Bedienungsanleitung

Panasonic

Panasonic HD Link2Cell KX-TG885SK Bedienungsanleitung

Panasonic

Panasonic KX-TG7302FX Bedienungsanleitung

Panasonic

Panasonic KX-TG8102 Bedienungsanleitung

Panasonic

Panasonic KX-TC1085BXB Bedienungsanleitung

Panasonic

Panasonic KX-TPA50 B08 Bedienungsanleitung

Panasonic

Panasonic KX-TCC116ALW Bedienungsanleitung

Panasonic

Panasonic VE-GD36DL Bedienungsanleitung

Panasonic

Panasonic 940P Bedienungsanleitung

Panasonic

Panasonic KX-TC911B Bedienungsanleitung

Panasonic

Panasonic KX-TGE260 Bedienungsanleitung

Panasonic

Panasonic KX-TGP550 T04 Bedienungsanleitung

Panasonic

Panasonic KX-TG2352PW Bedienungsanleitung

Panasonic

Panasonic KX-TG2401 Bedienungsanleitung

Panasonic

Panasonic KX-TD7590CE Bedienungsanleitung

Panasonic

Panasonic KX-TGP551 T04 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Uniden

Uniden D1785 Series Bedienungsanleitung

Binatone

Binatone Style 1820 Bedienungsanleitung