Panasonic KX-TG7331FX Bedienungsanleitung

PNQW1226ZA DC0708DN0 FX-3/4

Connections

Important:

LIf you use a telephone line cord which is not supplied, the unit may not work

properly.

(220-240 V AC, 50 Hz)

To telephone

line

DSL/ADSL filter

(For DSL/ADSL service

users)

Hook

Plug

Press plug firmly.

“Click”

Use only the supplied Panasonic

AC adaptor PQLV207CE.

Use only the supplied

telephone line cord.

Base unit

Model No.

KX-TG7331FX

KX-TG7341FX

Quick Guide

To use this unit in your country, first change the unit’s region setting to match your

country. Change the unit’s display language as needed.

Refer to “Changing the unit’s region setting” in the operating instructions.

TG7331_7341FX(e)_QG.fm Page 1 Friday, July 11, 2008 9:47 AM

– 2 –

Battery installation/Battery charge

Charge for about 7 hours.

Note:

LUSE ONLY Ni-MH batteries AAA (R03) size.

LDo NOT use Alkaline/Manganese/Ni-Cd batteries.

Operating tips

Using the navigator key

The handset navigator key can be used to

navigate through menus and to select items

shown on the display by pressing {^}, {V},

{<}, or {>}.

To adjust the receiver or speaker volume,

press {^} to increase the volume, or press {V}

to decrease the volume repeatedly while

talking.

Soft keys

The handset features 3 soft keys. By pressing

a soft key, you can select the feature shown

directly above it on the display.

Rechargeable

Ni-MH ONLY

* Model shown is KX-TG7331.

“Charging”is

displayed.

{V}

{^}

Volume up

Volume down

{<}{>}

TG7331_7341FX(e)_QG.fm Page 2 Friday, July 11, 2008 9:47 AM

– 3 –

Display language (Handset) (default: English)

16 display languages are available.

You can select “Deutsch”, “English”, “Magyar”, “Polski”, “SlovenČina”,

“ČeŠtina”, “Hrvatski”, “Slovenscina”, “Eesti”, “LIETUVIŠKAI”,

“LatvieŠu”, “Românã”, “БЪЛГАРСКИ”, “Srpski”, “МАКЕДОНСКИ”, or “Shqip”.

1K(middle soft key)

2{V}/{^}: “Handset Setup”iM

3{V}/{^}: “Display Setup”iM

4{V}/{^}: “Select Language”iM

5{V}/{^}: Select your desired language. iMi{ih}

Note:

LIf you select a language you cannot read: {ih} iKi{^} 2 times iM

i{V} 2 times iM2 times i{V}/{^}: Select your desired language. i

Mi{ih}

Dialling mode (Handset) (default: Tone)

1K(middle soft key)

2{V}/{^}: “Base Unit Setup”iM

3{V}/{^}: “Dial Mode”iM

4{V}/{^}: Select the desired setting. iMi{ih}

Date and time (Handset)

1K(middle soft key)

2{V}/{^}: “Handset Setup”iM

3{V}/{^}: “Time Settings”iM

4{V}/{^}: “Set Date & Time”iM

5Enter the current date, month, and year.

6Enter the current hour and minute.

7Mi{ih}

TG7331_7341FX(e)_QG.fm Page 3 Friday, July 11, 2008 9:47 AM

– 4 –

Basic operations

Making/Answering calls (Handset)

Making calls Dial the phone number. i{C}/{s}

Answering calls {C}/{s}

To hang up {ih}

To adjust the receiver/

speaker volume

Press {^} or {V} repeatedly while talking.

Making a call using the redial

list

j(right soft key) i{V}/{^}: Select the desired

phone number. i{C}

Temporary tone dialling

(for rotary/pulse service

users)

1Make a call.

2Press {*} when prompted to enter your code or

PIN, then press the appropriate dial keys.

Handset ringer volume 1K(middle soft key)

2{V}/{^}: “Handset Setup”iM

3{V}/{^}: “Ringer Setup”iM

4{V}/{^}: “Ringer Volume”iM

5{V}/{^}: Select the desired volume. iMi

{ih}

Making/Answering calls (Base unit)

Making calls {s} iDial the phone number.

Answering calls {s}

To hang up {s}

To adjust the speaker

volume

Press {^} or {V} repeatedly while talking.

Redialling the last number

dialled

{s} i{R}

Temporary tone dialling

(for rotary/pulse service

users)

1Make a call.

2Press {*} when prompted to enter your code or

PIN, then press the appropriate dial keys.

To adjust the base unit ringer

volume

Press {^} or {V} repeatedly to select the desired

volume.

LTo turn the ringer off, press and hold {V} until the

unit beeps.

TG7331_7341FX(e)_QG.fm Page 4 Friday, July 11, 2008 9:47 AM

– 5 –

Phonebook (Handset)

Adding entries 1n(left soft key) iK

2{V}/{^}: “New Entry”iM

3Enter the party’s name (16 characters max.). i

LYou can change the character entry mode by

pressing /.

4Enter the party’s phone number (24 digits max.).

iM2 times i{ih}

LTo enter a name, see the character table in the

operating instructions.

Making calls 1n(left soft key)

2{V}/{^}: Select the desired entry.

LYou can scroll through the phonebook entry by

pressing and holding {V} or {^}.

3{C}

Answering system (Base unit): KX-TG7341

Answering on/off Press {s}to turn on/off the answering system.

Listening to messages {6}

Frequently asked questions

Question Cause/solution

Why is wflashing? LThe handset is too far from the base unit. Move

closer.

LThe base unit’s AC adaptor is not connected.

Check the connections.

LYou are using the handset or base unit in an area

with high electrical interference. Re-position the

base unit and use the handset away from sources

of interference.

LThe handset is not registered to the base unit.

Why can I not make calls? LThe dialling mode may be set incorrectly. Change

the setting (page 3).

What should I do when the

handset does not turn on?

LMake sure the batteries are installed correctly.

LFully charge the batteries.

LClean the charge contacts and charge again.

Basic operations

TG7331_7341FX(e)_QG.fm Page 5 Friday, July 11, 2008 9:47 AM

– 6 –

How long is the battery

operating time?

LWhen you are using fully-charged Ni-MH batteries

(supplied batteries);

In continuous use: 17 hours max.

Not in use (standby): 150 hours max.

LIt is normal for batteries not to reach full capacity

at the initial charge. Maximum battery

performance is reached after a few complete

cycles of charge/discharge (use).

LActual battery performance depends on a

combination of how often the handset is in use

and how often it is not in use (standby).

Can I keep the handset on

the base unit or charger

when I am not using it?

LEven after the handset is fully charged, the

handset can be left on the base unit or charger

without any ill effect on the batteries.

When should I replace the

batteries?

LIf the batteries are fully charged until

displayed, but

is displayed after a few calls,

replace the batteries with new ones.

What is a PIN? LThe PIN is a 4-digit number that must be entered

in order to change certain base unit settings. The

default PIN is “0000”.

What should I do to display

caller information?

LYou must subscribe to a Caller ID service. Contact

your service provider/telephone company for

details.

LThe message “You must first subscribe

to Caller ID.” will be displayed until you

receive caller information after subscribing to a

Caller ID service.

What should I do when noise

is heard, sound cuts in and

out?

LYou are using the handset or base unit in an area

with high electrical interference. Re-position the

base unit and use the handset away from sources

of interference.

LMove closer to the base unit.

LIf you use a DSL/ADSL service, we recommend

connecting a DSL/ADSL filter between the base

unit and the telephone line jack. Contact your

DSL/ADSL provider for details.

What should I do when the

operating time seems to be

shorter even after I fully

charged the batteries?

LClean the battery ends (S, T) and the charge

contacts with a dry cloth, and charge again.

Frequently asked questions

Question Cause/solution

TG7331_7341FX(e)_QG.fm Page 6 Friday, July 11, 2008 9:47 AM

– 7 –

What do I need to do to

erase y(Missed call) from

the display?

LThere are unviewed missed calls remaining. View

them and erase yin the following way.

1K(middle soft key)

2{V}/{^}: “Caller List”iM

3Press {V} to search from the most recent call, or

press {^} to search from the oldest call.

Frequently asked questions

Question Cause/solution

TG7331_7341FX(e)_QG.fm Page 7 Friday, July 11, 2008 9:47 AM

– 8 –

Registering a handset to the base unit

The supplied handset and base unit are pre-registered. If for some reason the

handset is not registered to the base unit, re-register the handset.

1K(middle soft key)

2{V}/{^}: “Handset Setup”iM

3{V}/{^}: “Register H.set”iM

Press and hold {x} for about 5 seconds,

until the registration tone sounds.

LThe next step must completed within

90 seconds.

NKX-TG7331

NKX-TG7341

Wait until “Enter Base PIN”is displayed. i

Enter the base unit PIN (default: “0000”). i

LWhen the handset has been registered

successfully, wstops flashing.

Handset

Base unit

{x}

Handset

TG7331_7341FX(e)_QG.fm Page 8 Friday, July 11, 2008 9:47 AM

– 9 –

Optional services (Caller ID and SMS)

If you subscribe to a Caller ID service,

caller information will be displayed when a call is received, or

when viewing missed calls.

To use SMS, you must subscribe to a Caller ID and/or an appropriate service

such as SMS.

SMS (Short Message Service)

012345

TG7331_7341FX(e)_QG.fm Page 9 Friday, July 11, 2008 9:47 AM

– 10 –

Notes

TG7331_7341FX(e)_QG.fm Page 10 Friday, July 11, 2008 9:47 AM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Schnurloses Telefon Handbücher

Panasonic

Panasonic KXTG6591E Bedienungsanleitung

Panasonic

Panasonic KX-TG5821AL, KX-TG5822AL Bedienungsanleitung

Panasonic

Panasonic KX-TG1810AL Bedienungsanleitung

Panasonic

Panasonic KX-TG2564S Bedienungsanleitung

Panasonic

Panasonic KX-TGF675 Bedienungsanleitung

Panasonic

Panasonic KX-TG5621C Bedienungsanleitung

Panasonic

Panasonic KX-TG8100HK Bedienungsanleitung

Panasonic

Panasonic KX-TG2650CN Bedienungsanleitung

Panasonic

Panasonic KX-TCD715ALM Bedienungsanleitung

Panasonic

Panasonic KX-TG7301HK Bedienungsanleitung

Panasonic

Panasonic KX-TG2720S Bedienungsanleitung

Panasonic

Panasonic KX-TG2267B - GigaRange - 2.4 GHz Digital Cordless... Bedienungsanleitung

Panasonic

Panasonic KXTGA820 - EXPND DIGITAL CORDLESS HANDSET Bedienungsanleitung

Panasonic

Panasonic KX-TG8412C Bedienungsanleitung

Panasonic

Panasonic KX-TC2106UAB Bedienungsanleitung

Panasonic

Panasonic VE-GD27DL Bedienungsanleitung

Panasonic

Panasonic KX-TG6313S - Cordless Phone - Pearl Bedienungsanleitung

Panasonic

Panasonic KX-TC1851B - 900 MHz DSS Cordless Phone Bedienungsanleitung

Panasonic

Panasonic KX-TG2730S - 2.4 GHz DSS Expandable Cordless... Bedienungs- und Montageanleitung

Panasonic

Panasonic TG2550 - 2.4 Gigarange Cordless Phone Bedienungsanleitung

Panasonic

Panasonic KX-TG7731S Bedienungsanleitung

Panasonic

Panasonic KX-TG9391C Bedienungsanleitung

Panasonic

Panasonic KX-TPA50 Bedienungsanleitung

Panasonic

Panasonic KX-TC1447 Bedienungsanleitung

Beliebte Schnurloses Telefon Handbücher anderer Marken

3Com

3Com NBX Bedienungsanleitung

BT FREESTYLE 3200 Bedienungsanleitung

AT&T

AT&T CL84102 Bedienungsanleitung

BREZZICNI

BREZZICNI CL-3622 Bedienungsanleitung

Sanyo

Sanyo CLT-J70 Bedienungsanleitung

Amplicomms

Amplicomms BigTel 201 Bedienungsanleitung

GE 26992 Bedienungsanleitung

AT&T

AT&T E1812B Bedienungsanleitung

Sanyo

Sanyo CLT-670 Bedienungsanleitung

GE 15432970 Bedienungsanleitung

Curtis

Curtis TC595 Bedienungsanleitung

Gigaset

Gigaset Gigaset 3000 Micro Bedienungsanleitung

Poly

Poly VVX D230 Einrichtungshandbuch

AT&T

AT&T 7625 Bedienungsanleitung

GE 27930 Bedienungsanleitung

Radio Shack

Radio Shack 43-3557 Bedienungsanleitung

Uniden

Uniden D1785 Series Bedienungsanleitung

Binatone

Binatone Style 1820 Bedienungsanleitung