Panasonic EY74A1 Bedienungsanleitung

© Panasonic Eco Solutions Power Tools Co., Ltd.

2012. All rights reserved. Unauthorized copying and

distribution is a violation of law.

Order Number PTD1208E02CE

Drill & Driver

Model No. EY74A1

Europe

Oceania

TABLE OF CONTENTS

PAGE PAGE

1 Warning -------------------------------------------------------------- 2

2 Specifications ----------------------------------------------------- 2

3 Troubleshooting Guide ----------------------------------------- 3

4 Disassembly and Assembly Instructions ---------------- 7

5 Wiring Connection Diagram ---------------------------------14

6 Schematic Diagram ---------------------------------------------14

7 Exploded View and Replacement Parts List -----------15

2

1Warning

Caution:

• Pb free solder has a higher melting point that standard solder; Typically the melting point is 50 - 70°F (30 - 40°C) higher. Please

use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature solder-

ing iron, please be careful not to heat too long.

• Pb free solder will tend to splash when heated too high (about 1100°F / 600°C).

2 Specifications

3

3 Troubleshooting Guide

3.1. Troubleshooting Guide (Refer to Wiring Connection Diagram)

4

5

6

3.2. Trial Operation (after checking Troubleshooting Guide)

3.2.1. Assembly

• Confirm if there is no gap between housing A and B by pinching lead wires.

• There is no dust or deformation on battery terminals.

• Confirm if there is no dirt when repairing.

3.2.2. Operation

• Confirm the forward and reverse side of rotation.

• Confirm if LED lights ON. Once battery pack is removed, press the switch handle; otherwise LED does not light ON.

• Check if the motor rotation become higher as the amount of depression of switch handle.

• Check if the rotation speed is normal rated value.

High : 1,750/min (rpm) at 18V, 1,400/ min (rpm) at 14.4V

Low : 600/min (rpm) at 18V, 450/ min (rpm) at 14.4V

• Confirm the action when setting the drill mode .

• Confirm if the rotation stops immediately when releasing the switch handle.

• Confirm if the chuck jaws move smoothly and hold the bit firmly.

• Check if the clutch torque changes suited for the number of clutch.

• Confirm if the chuck is assembled firmly and chuck jaws operate normally.

• Confirm if there is no abnormal sound when shaking the unit with the switch on.

7

4 Disassembly and Assembly Instructions

*Please assemble by opposite procedure.

4.1. How to remove the keyless chuck

4.2. How to remove the housing

8

4.3. How to remove the lead wires from the motor brush assembly and the

control PCB.

4.4. How to remove the switch assembly

9

4.5. How to remove the driving block

4.6. How to remove the motor carbon brush assembly

10

4.7. How to remove the driving block and the motor assembly

4.8. How to remove the control PCB

Andere Handbücher für EY74A1

1

Inhaltsverzeichnis

Andere Panasonic Bohren Handbücher

Panasonic

Panasonic EY6230 - CORDLES DRILL&DRIVER Bedienungsanleitung

Panasonic

Panasonic EY7441 Bedienungsanleitung

Panasonic

Panasonic EY7410 - DRILL DRIVER 3.6V Bedienungsanleitung

Panasonic

Panasonic EY 6220 Bedienungsanleitung

Panasonic

Panasonic EY6950 - 18V HAM. DRILL&DRIVE Bedienungsanleitung

Panasonic

Panasonic EY7840X Bedienungsanleitung

Panasonic

Panasonic EY6903 Bedienungsanleitung

Panasonic

Panasonic EY6812NQKW Bedienungsanleitung

Panasonic

Panasonic EY78A1 Bedienungsanleitung

Panasonic

Panasonic EY6225CQ - CORDLESS Bedienungsanleitung

Panasonic

Panasonic EY7549 Bedienungsanleitung

Panasonic

Panasonic EY7960 - HAMMER DRILL 21.6V Bedienungsanleitung

Panasonic

Panasonic EY6803 - HAMMER DRILL DRIVER 12V Bedienungsanleitung

Panasonic

Panasonic EY7840 Bedienungsanleitung

Panasonic

Panasonic EY6780 Bedienungsanleitung

Panasonic

Panasonic 7430LA Bedienungsanleitung

Panasonic

Panasonic EY7410 - DRILL DRIVER 3.6V Bedienungsanleitung

Panasonic

Panasonic EY 6220 Bedienungsanleitung

Panasonic

Panasonic EY7950LR2S Bedienungsanleitung

Panasonic

Panasonic EY7440LN2L Bedienungsanleitung

Panasonic

Panasonic EY6406 - CORDLES DRILL&DRIVER Bedienungsanleitung

Panasonic

Panasonic EY7542LN2L Bedienungsanleitung

Panasonic

Panasonic EY7460 - DRILL DRIVER 21.6V Bedienungsanleitung

Panasonic

Panasonic EY6950 - 18V HAM. DRILL&DRIVE Bedienungsanleitung

Beliebte Bohren Handbücher anderer Marken

Makita

Makita BDF456 Bedienungsanleitung

Black & Decker

Black & Decker LDX220 Bedienungsanleitung

Hitachi

Hitachi DH 40MA Bedienungsanleitung

Challenge

Challenge JO Technisches Referenzhandbuch

Makita

Makita LXFD01 Bedienungsanleitung

Festool

Festool T18+3 Bedienungsanleitung

Milwaukee

Milwaukee M12 FPDX-202X Bedienungsanleitung

EINHELL

EINHELL TE-RH 32 E Bedienungsanleitung

Makita

Makita DHP484 Bedienungsanleitung

Makita

Makita FD05 Bedienungsanleitung

Bosch

Bosch PSB 530 RA Bedienungsanleitung

Maximum

Maximum 054-1359-4 Bedienungsanleitung

Makita

Makita HP332D Bedienungsanleitung

Raider

Raider RDP-HD31H Bedienungsanleitung

Bort

Bort BPM-1400x2 Bedienungsanleitung

Black & Decker

Black & Decker 7266 Bedienungsanleitung

KENT USA

KENT USA TRD1230 Bedienungsanleitung

Bosch

Bosch GSB 19-2 RE Bedienungsanleitung