Panasonic DVD-S52E Bedienungsanleitung

ORDERNO.CHM0604020CE

DVDPlayer

DVD-S52E / DVD-S52EB / DVD-S52EG

DL4.1Mechanism Series

Color

(S).......................Silver Type

(K).......................Black Type(S52E/EG Only)

SPECIFICATIONS

Specifications

Power supply: AC 230-240 V, 50 Hz

(DVD-S52EB)

AC 230 V, 50 Hz

(DVD-S52E/EG)

Power consumption: 14 W

Power consumption instandbymode:

Dimensions: 430 (W) × 251 (D) × 43 (H) mm

Mass: 2.2kg(approx.)

Signal system: PAL625/50, PAL525/60, NTSC

Operating temperature range: + 5to+ 35 °C (+ 41 to+ 95 °F)

Operating humidityrange: 5to90 %RH (no

condensation)

Discs played[8cm (3") or12 cm (5")]:

(1) DVD (DVD-Video, DVD-Audio, DivX*6,7)

(2) DVD-RAM (DVD-VR, JPEG*4,7, MPEG4*5,7, DivX*6,7,

MP3*2,7)

(3) DVD-R (DVD-Video, DVD-VR, JPEG*4,7, MP3*2,7, DivX*

6,7, MPEG4*5,7)

(4) DVD-R DL(DVD-Video, DVD-VR)

(5) DVD-RW(DVD-Video, DVD-VR, JPEG*4,7, MP3*2,7, DivX*

6,7, MPEG4*5,7)

(6) +R/+RW(Video)

(7) +R DL(Video)

(8) CD, CD-R / CD-RW(CD-DA, VideoCD, SVCD*1, MP3*2,7,

WMA*3,7, JPEG*4,7, MPEG4*5,7, DivX*6,7, HighMAT

Level 2(Audioand Image))

*1 Conforming toIEC62107

*2 MPEG-1Layer 3, MPEG-2Layer 3

*3 WindowsMediaAudioVer.9.0L3

Not compatiblewithMultipleBit Rate(MBR)

*4 Exif Ver2.1JPEG Baselinefiles

Picture resolution: between160 × 120 and 6144 × 4096

pixels(Sub sampling is4:0:0, 4:2:0, 4:2:2or4:4:4)

Extremelylong and slender pictures maynot be

displayed

*5 MPEG4datarecordedwiththePanasonicSD multi

cameras orDVD videorecorders conforming toSD

VIDEO specifications(ASFstandard) /MPEG4(Simple

Profile) videosystem/G.726 audiosystem

*6 Playsall versionsof DivX video(including DivX

6) withstandardplayback of DivX mediafiles.

CertifiedtotheDivX Home Theater Profile.

GMC (Global Motion Compensation) not supported.

*7 Thetotal combinedmaximumnumber of recognizable

audio, picture and videocontentsand groups: 4000

audio, picture and videocontentsand 400 groups.

Videooutput:

Output level: 1Vp-p(75 )

Output terminal: Pinjack (1system)/AV

S videooutput:

Y output level: 1Vp-p(75 )

C output level: NTSC: 0.286 Vp-p(75 )

PAL: 0.300 Vp-p(75 )

Output terminal: S terminal (1system)/AV

Component videooutput: [NTSC: 480p/480i,

PAL: 576p/576i]

Y output level: 1Vp-p(75 )

P B output level: 0.7Vp-p(75 )

P R output level: 0.7Vp-p(75 )

Output terminal: Pinjack (Y: green, P B : blue,

P R : red) (1system)

RGB videooutput:

R output level: 0.7Vp-p(75 )

Goutput level: 0.7Vp-p(75 )

B output level: 0.7Vp-p(75 )

Output terminal: AV

Videoperformance:

Horizontal resolution: More than500 lines

VideoS/N ratio: More than65dB

Audiooutput:

Output level: 2Vrms (1kHz, 0dB)

Output terminal: Pinjack/AV

Number of terminals:

2channel: 1system

5.1channel discrete /

output (5.1channel): 1system

Audioperformance:

(1) Frequencyresponse:

DVD (linear audio): 4Hz-22 kHz (48 kHz sampling)

4Hz-44 kHz (96 kHz sampling)

DVD-Audio: 4Hz-88 kHz (192 kHz

sampling)

CD Audio: 4Hz-20 kHz

(2) S / N ratio:

CD Audio: 115 dB

(3) Dynamicrange:

DVD (linear audio): 102 dB

CD Audio: 98 dB

(4) Total harmonic

distortion:

CD Audio: 0.0025 %

Digital audiooutput:

Optical digital output: Optical terminal

Coaxial digital output: Pinjack

HDMI AV output: 19pin

Pickup

Wavelength: 662 nm/ 785 nm

Laser power: CLASS 2/ CLASS 3A

Note:

Specificationsare subject tochangewithout notice.

Mass and dimensionsare approximate.

Solder:

Thismodel uses leadfree solder (PbF).

Unauthorized copying and distribution isaviolation of law.

1. IMPORTANT SERVICE INFORMATION

1.1. Notes

Whenyou replace EEPROM orexchange MODULE P.C.B., you have totake "Manual for

customer" tothe customerwithunit.

(alsointhe case of unit exchange)

Please take and use "Manual forcustomer" frombelow.

1. Come with MODULE P.C.B. or EEPROM(Service part).

2. Make aphotocopysection 1.3. "Manual for customer" on this

service manual.

"Manual forcustomer" has important information for"DivX Video-on-Demand Service" user.

Please don't forget take it tothe customerwithunit!

1.2. About DivX

1.2.1. DivX

A videocompression format developedbyDivXNetworks, Inc. that compresses videofiles

without anyconsiderable loss of videoquality.

1.2.2. About DivX Video-on-Demand Content

1.3. Manual for Customer

2. SAFETY PRECAUTIONS

2.1. GENERALGUIDELINES

1. When servicing, observe the original lead dress. Ifashort circuit

isfound, replace all parts which have been overheated or

damaged bythe short circuit.

2. After servicing, see to itthat all the protective devices such as

insulation barriers, insulation papers shields are properly

installed.

3. After servicing, make the following leakage current checks to

prevent the customer from being exposed to shock hazards.

2.1.1. LEAKAGE CURRENTCOLD CHECK

1. Unplug the AC cord and connect ajumper between the two

prongs on the plug.

2. Measure the resistance value, with an ohmmeter, between the

jumpered AC plug and each exposed metalliccabinet part on the

equipment such as screwheads, connectors, control shafts, etc.

When the exposed metallicpart has areturn path to thechassis,

the reading shouldbe between 1M and 5.2M . / When the

exposed metal does not have areturn path to the chassis, the

reading must be . Figure 1

2.1.2. LEAKAGE CURRENTHOTCHECK (See Figure 1 .)

1. Plug the AC cord directlyinto the AC outlet. Donot use an

isolation transformer for thischeck.

2. Connect a1.5k , 10 watts resistor, inparallel with a0.15 F

capacitors, between each exposed metallicpart on the set and a

good earth ground such as awater pipe, as shownin Figure 1.

3. Use an AC voltmeter, with 1000 ohms/voltor more sensitivity, to

measure the potential across the resistor.

4. Check each exposed metallicpart, and measure the voltage at

each point.

5. Reverse the AC plug inthe AC outlet and repeat each of the above

measurements.

6. The potential at anypoint shouldnot exceed 0.75 volts RMS. A

leakage current tester (Simpson Model 229 or equivalent) maybe

used to make the hot checks, leakage current must not exceed 1/2

milliamp. Incase ameasurement isoutside of the limits specified,

there isapossibilityof ashock hazard, and the equipment should

be repaired and rechecked before itisreturned to the customer.

3. PREVENTION OF ELECTRO STATIC DISCHARGE

(ESD) TO ELECTROSTATICALLY SENSITIVE (ES)

DEVICES

Some semiconductor(solidstate) devices canbe damagedeasilybystatic electricity. Such

components commonlyare calledElectrostaticallySensitive (ES) Devices. Examples of typical

ES devices are integratedcircuits and some field-effect transistorsand semiconductor"chip"

components. The following techniques shouldbe usedtohelpreduce the incidence of

component damage causedbyelectrostatic discharge (ESD).

1. Immediatelybefore handling anysemiconductor component or

semiconductor-equipped assembly, drainoff anyESDon your

bodybytouching aknownearth ground. Alternatively, obtainand

wear acommerciallyavailabledischarging ESDwrist strap, which

shouldbe removed for potential shock reasons prior to applying

power to the unitunder test.

2. After removing an electrical assemblyequipped with ES devices,

place the assemblyon aconductive surface such as alminum foil,

to prevent electrostaticcharge buildup or exposure of the

assembly.

3. Use onlyagrounded-tipsoldering iron to solder or unsolder ES

devices.

4. Use onlyan anti-staticsolder removal device. Some solder

removal devices not classified as "anti-static(ESDprotected)"

can generate electrical charge sufficient to damage ES devices.

5. Donot use freon-propelled chemicals. These can generate

electrical charges sufficient to damage ES devices.

6. Donot remove areplacement ES device from its protective

package until immediatelybefore you are readyto install it. (Most

replacement ES devices are packaged with leads electrically

shorted together byconductive foam, alminum foil or

comparableconductive material).

7. Immediatelybefore removing the protective material from the

leads of areplacement ES device, touch the protective material to

the chassisor circuitassemblyinto which the device will be

installed.

Caution

Besure no power isapplied to the chassisor circuit, and observe

all other safetyprecautions.

8. Minimize bodilymotions when handling unpackaged replacement

ES devices. (Otherwise hamless motion such as the brushing

together of your clothes fabricor the lifting of your foot from a

carpeted floor can generate staticelectricity(ESD)sufficient

todamage an ES device).

4. PRECAUTION OF LASER DIODE

5. SERVICE CAUTION BASED ON LEGAL

RESTRICTIONS

5.1. General description about Lead Free Solder (PbF)

The leadfree solderhas beenusedinthe mounting process of all electrical components on the

printedcircuit boards usedforthis equipment inconsidering the globallyenvironmental

conservation.

The normal solderis the alloyof tin(Sn) and lead(Pb). Onthe otherhand, the leadfree solderis

the alloymainlyconsists of tin(Sn), silver(Ag) and Copper(Cu), and the melting point of the

leadfree solderis higherapprox.30°C (86°F) more thanthat of the normal solder.

Definition of PCB LeadFree Solderbeing used

Service caution forrepairwork using LeadFree Solder(PbF)

-The lead free solder has to be used when repairing the equipment

for which the lead free solder isused. (Definition: The letter of

“PbF” isprinted on the PCB using the lead free solder.)

-To put lead free solder, itshouldbe well molten and mixed with the

original lead free solder.

-Remove the remaining lead free solder on the PCB cleanlyfor

soldering of the new IC.

-Since the melting point of the lead free solder ishigher than that of

the normal lead solder, ittakes the longer time to meltthe lead

free solder.

-Use the soldering iron (more than 70W) equipped with the

temperature control after setting the temperature at 350±30°C(662

±86°F).

RecommendedLeadFree Solder(Service Parts Route.)

The following 3 types of leadfree solderare available through the service parts route.

-RFKZ03D01K-----------(0.3mm 100g Reel)

-RFKZ06D01K-----------(0.6mm 100g Reel)

-RFKZ10D01K-----------(1.0mm 100g Reel)

Note

*Ingredient: tin(Sn) 96.5%, silver (Ag) 3.0%, Copper (Cu) 0.5%,

Cobalt(Co) / Germanium (Ge) 0.1to 0.3%

6. PREVENTION OF STATIC ELECTRICITY

DISCHARGE

The laserdiode inthe traverse unit (optical pickup) maybrake downdue tostatic electricityof

clothes orhumanbody. Use due caution toelectrostatic breakdownwhenservicing and

handling the laserdiode.

6.1. Grounding for electrostaticbreakdownprevention

Some devices suchas the DVD playeruse the optical pickup (laserdiode) and the optical

pickup will be damagedbystatic electricityinthe working environment. Proceedservicing

works underthe working environment where grounding works is completed.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic DVD-Player Handbücher

Panasonic

Panasonic DVDLV57 - PORTABLE DVD Bedienungsanleitung

Panasonic

Panasonic PVD4741 - DVD/VCR DECK Bedienungsanleitung

Panasonic

Panasonic DVD-K33 Bedienungsanleitung

Panasonic

Panasonic SL-DT100EG Gebrauchsanweisung

Panasonic

Panasonic DVD-S48 Bedienungsanleitung

Panasonic

Panasonic DVD-S29 Bedienungsanleitung

Panasonic

Panasonic DVDS1 - PORTABLE DVD PLAYER Bedienungsanleitung

Panasonic

Panasonic DVD-S54 Bedienungsanleitung

Panasonic

Panasonic DVD-CV51 Bedienungsanleitung

Panasonic

Panasonic DVD-S31 Bedienungsanleitung

Panasonic

Panasonic DVD-RV20 Bedienungsanleitung

Panasonic

Panasonic DVD-S32EB Bedienungsanleitung

Panasonic

Panasonic DVD-F61 Bedienungsanleitung

Panasonic

Panasonic DVD-CV51 Bedienungsanleitung

Panasonic

Panasonic DVD-RA61 Bedienungsanleitung

Panasonic

Panasonic DVD-S500 Bedienungsanleitung

Panasonic

Panasonic PV-D4733S-K Bedienungsanleitung

Panasonic

Panasonic DVD-A115U Bedienungsanleitung

Panasonic

Panasonic DVD-S500 Bedienungsanleitung

Panasonic

Panasonic DMP-BD50 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EZ47VEB Bedienungsanleitung

Panasonic

Panasonic DVD-S68GA Bedienungsanleitung

Panasonic

Panasonic DVD-A120 Bedienungsanleitung

Panasonic

Panasonic DVD-S35 Bedienungsanleitung

Beliebte DVD-Player Handbücher anderer Marken

Sony

Sony DVP-F11 Bedienungsanleitung

Philips

Philips DVP3560K/F8 Bedienungsanleitung

LENCO

LENCO DVP-740 X2 Bedienungsanleitung

JVC

JVC XV-N650BEU Bedienungsanleitung

Aiwa

Aiwa XD-DV370 Bedienungsanleitung

MedeaWiz

MedeaWiz Sprite 4K DV-S4 Bedienungsanleitung

Denon

Denon DVM-1805 - DVD Changer Bedienungsanleitung

Toshiba

Toshiba SD-3815 Bedienungsanleitung

Tevion

Tevion 44330 Bedienungsanleitung

Samsung

Samsung DVD-HD860 Bedienungsanleitung

Sylvania

Sylvania DP170SL8 Bedienungsanleitung

Toshiba

Toshiba SD-P1200 Bedienungsanleitung

JVC

JVC XV-D9000E Bedienungsanleitung

Dolby Laboratories

Dolby Laboratories CP650 Bedienungsanleitung

Philips

Philips DVD737K/931 Bedienungsanleitung

Denon

Denon DVD-5900 Bedienungsanleitung

Philips

Philips DVD 951 Bedienungsanleitung

Philips

Philips DVDR3460 Bedienungsanleitung