Panasonic LQ-MD800 Bedienungsanleitung

Prelimina

DVDVideoRecorder

Operating Instructions

Model No. LQ-MD800

The specifications and features are subject to

change due to continual improvement.

Before connecting, operating or adjusting this product,

please read these instructions completely.

Please keep this manual for future reference.

Prelimina Control reference guide

Keep this page open as you read through the Operating Instructions. Refer to it for the control and component names which appear in the

text.

① ② ③ ⑩ ⑪

⑮

⑯ ⑫

⑰

⑱ ⑬

⑲

⑳ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑭

① POWER on/off button (POWER)

② Disc tray

③ Disc tray Open/close button (OPEN/CLOSE )

④ Display

⑤ Slow/Search buttons (REV/FWD /, /)

⑥ Stop button (STOP ■)

⑦ Play button (PLAY )

⑧ Pause button (PAUSE )

⑨ Recording button (REC ●+ PLAY )

⑩ Direct Navigator button (SEARCH) / Menu button (MENU [SHIFT + SEARCH] )

⑪ Display button (STATUS) / Functions button (FUNCTION [SHIFT + STATUS])

⑫ Cursor buttons (▲,▼) / REPEAT button (REPEAT [SHIFT+▲] *Cannot work)

Cursor buttons (,) / STEP button (,) / SKIP button( , /[SHIFT+,])

Enter button (ENTER) / Marker button (MARKER [SHIFT +ENTER])

⑬ RETURN button (RETURN)

⑭ Shift buttons (SHIFT)

⑮ LED

･BUSY DISC BUSY LED

! Attention. Don't shut off the power supply when it light up.

･REC INHIBIT When it is turned on, neither recording nor editing is possible.

･(REPEAT) *It doesn’t work on this sample.

⑯ Headphones Volume

⑰ Audio REC Level

⑱ Headphones Jack

⑲ MIC Jack

⑳ MODE LOCK When it is set to ON, none of the front panel switch can be operated.

Prelimina

Control reference guide (continued)

The unit’s display

① ② ③ ④ ⑤ ⑥ ⑦

⑩

⑧ ⑨

① Audio Level Meter

② The display mode of the main display section

CHAP: Chapter number

PG: Program number

PL: Play list number

③ Rotating (REC, PLAY):

Rotating (REC):recording

Stopped (REC):recording paused

Rotating (PLAY):playing

Stopped (PLAY):play paused

④ Recording indicator (REC)

On: While recording

⑤ Remain * It doesn’t work on this sample.

⑥ Disc type

DVD-RAM : DVD-RAM

DVD-R : DVD-R

DVD : Finalized DVD-R

⑦ Recording mode (pages 19 and 24)

XP: High-quality mode

SP: Normal mode

LP: Long play mode

⑧ Input

A1（Video）, A2（S-Video）, DV

⑨ Main display section

Recording and play counter

Remaining recording time (For example: 1 hour⇒Displayed as R 1:00)

Current time

Title, track, chapter, group

Miscellaneous messages etc.

Prelimina

Control reference guide (continued)

① ② ③ ④ ⑤ ⑥ ⑦

⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭

①Video input connector (BNC)

②Video output connector (BNC)

③Component Video output connector (BNC)

④S-Video input connector （4P）

⑤S-Video Output connector （4P）

⑥Ground terminal

⑦Power socket

⑧DV input connector

⑨Pause Remote connector

⑩Audio CH1/CH2 input connector (PHONE)

⑪Audio CH1/CH2 output connector (PHONE)

⑫Audio Monitor output connector (PHONE)

⑬RS232C Remote connector (D-sub 9P)

⑭USB Remote connector

Prelimina Connecting and Setting up

First of all, please disconnect AC mains leads of all units, which you are going to connect with before connecting and disconnecting cables.

Use an Audio/Video cable or Audio/S-Video cable.

Follow these steps if you connect your unit to a television using an Audio/Video cable. (AV Connection)

②

(1)

Connect as following steps

1 Audio/Video cable (not supplied)

2 AC mains leads (supplied)

3 AC mains leads (not supplied) Sockets

(1) Audio/Video Output socket

(2) Audio/Video Input socket

Follow these steps if you connect your unit to a television using an S-Video cable. (S-Video Connection)

③

（１）

（２）（３）

Connect as following steps

1 Audio/Video cable (not supplied)

2 S-Video cable (not supplied)

3 AC mains leads (supplied)

4 AC mains leads (not supplied) Sockets

(1) S-Video Output socket

(2) Audio/Video Output socket

(3) S-Video Input socket

(4) Audio/Video Input socket

Do not connect the unit through a video cassette recorder

Video signals fed through video cassette recorders will be affected by copyright protection systems and the picture will not be shown

correctly on the television.

RF IN

Prelimina Setting TV screen type / Select Input

TV screen type

The aspect ratio is factory set to 4:3 for a regular television. You do not have to change this setting if you have a regular 4:3 aspect

television.

Preparation

・Turn on the television and select the appropriate video input to suit the connections to this unit.

1 Press [MENU (SHIFT + SEARCH) ] to show the MENU window.

2 Use [▲, ▼, , ] to select the “SETUP” and press [ENTER].

3 Use [▲, ▼] to select the “Connection” and press [] or [] .

4 Use [▲, ▼] to select “TV Aspect” and press [ENTER].

5 Use [▲, ▼] to select the TV aspect and press [ENTER].

・4:3 (factory setting)

・16:9

■To return to the previous screen

Press [RETURN]

For your reference

Apart from “TV Aspect”, other settings also affect how video appears on your television. Check the following if video doesn’t appear

correctly

on your television.

・”Connection”-“Norm (4:3) TV Settings (DVD-RAM)”or “norm (4:3) TV Settings (DVD)”.

・The video setting on the disc. How video appears is often specified by the disc itself.

・The video settings on your television.

Select Input

1 Press [MENU (SHIFT + SEARCH)] to show the MENU window.

2 Use [▲, ▼, , ] to select the “SETUP” and press [ENTER].

3 Use [▲, ▼] to select the “Picture” and press [] or [] .

4 Use [▲, ▼] to select “Input select” and press [ENTER].

5 Use [, ] to select Input and press [ENTER].

PreliminaSetting REC mode / AUDIO mode / Initialize ALL Setting

REC mode

1 Press [MENU (SHIFT + SEARCH)] to show the MENU window.

2 Use [▲, ▼, , ] to select the “SETUP” and press [ENTER].

3 Use [▲, ▼] to select the “Picture” and press [] or [] .

4 Use [▲, ▼] to select “Rec Mode” and press [ENTER].

5 Use [▲, ▼] to select the Rec Mode and press [ENTER].

AUDIO mode

■Recording sound using LPCM

To obtain higher quality recordings using LPCM, prepare as follows:

1 Press [MENU (SHIFT + SEARCH)] to show the MENU window.

2 Use [▲, ▼, , ] to select the “SETUP” and press [ENTER].

3 Use [▲, ▼] to select the “Sound” and press [] or [] .

4 Use [▲, ▼] to select “Audio Mode for XP/SP Recording” and press [ENTER].

5 Use [▲, ▼] to select the Audio Mode and press [ENTER].

Note

・Sound recordings made using LPCM require more information than usual. Consequently the picture quality of LPCM recordings may be

less than that of normal XP/SP mode recordings.

Clock Settings

･The SETUP screen appears.

1 Press [MENU (SHIFT + SEARCH)] to show the MENU window.

2 Use [▲, ▼, , ] to select the “SETUP” and press [ENTER].

3 Use [▲, ▼] to select the “Settings” and press [] or [] .

4 Use [▲, ▼] to select “Clock” and press [ENTER].

5 Use [, ] to select the item you want to change.

･The items change as follows: Hour⇒Minute⇒Second⇒Day⇒Month⇒Year

6 Use [▲, ▼] to change the setting.

7 Press [ENTER] .

8 Press [RETURN] .

･The SETUP screen reappears and the clock starts.

Note

In the event of a power failure, the clock will operate on its back up system for a minimum of 3 years.

Initialize ALL Settings

The all settings in the SETUP screen return to the factory settings. (except for the TV System and Clock)

1 Press [MENU (SHIFT + SEARCH)] to show the MENU window.

2 Use [▲, ▼, , ] to select the “SETUP” and press [ENTER].

3 Use [▲, ▼] to select the “Settings” and press [] or [] .

4 Use [▲, ▼] to select “Shipping Condition” and press [ENTER].

5 Use [, ] to select “Yes” and press [ENTER].

6 Use [, ] to select “Yes” and press [ENTER].

■Settings

Repeat Duration *It doesn’t work on this sample.

■Remote

*It doesn’t work on this sample.

■Picture

Rec Mode XP

*It doesn’t work on this sample.

Input Select Video

Hybrid VBR Resolution Fixed

Still Mode Field

Seamless Play Off

Black Level Control

Input level Lighter

Composite & SVideo Output Level Darker

Composite Video Output LevelNormal

■Sound

Audio during Search On

Dynamic Range Compression Off

Bilingual Audio Selection M1

Audio Mode for XP/SP Recording Dolby Digital

Audio Mode for DV Input Stereo 1

■Display

On-Screen Messages Automatic

■Connection

TV Aspect Norm(4:3)

Progressive (NTSC) Off

Norm (4:3) TV Settings (DVD) Pan & Scan

Norm (4:3) TV Settings (DVD-RAM) Norm (4:3)

Prelimina Recording programs

[RAM] [DVD-R]

1 Press [OPEN/CLOSE ] to open the tray and insert a disc.

・Insert one disc only within the tray’s guides.

・Press [OPEN/CLOSE] to close the tray.

e.g.: DVD-RAM

(1) Arrow pointing inwards.

(2) Align correctly.

・Insert label-up with the arrow facing in. (with double-sided discs, load so the label for the side you want to record is facing up.)

2 Input select Menu to select the input channel.

・Select “Video”, “S-Video”, “DV”.

3 Input select Menu to select the recording mode.

・Select “XP”, “SP”, “LP”.

4 Input select Menu to select the Audio mode.

・Select “LPCM”, “AC3”.

5 Press [REC ●+PLAY ] to start recording.

・The program which has already been recorded is not overwritten.

*Recording starts when press REC button first and then PLAY.

To ensure recording

・Use a disc that can be recorded on and that has enough space available.

・Ensure the write protect tab is not set to “PROTECT”.

・Ensure the disc is not write-protected with DISC INFORMATION.

■To pause recording

Press [PAUSE ] . Press again to restart recording.

■To stop recording

Press [STOP ■].

■Re-inserting double-sided discs

You can get up to 8 hours recording when you use

double-sided discs and use the “LP” mode.

■Recording modes and approximate recording times in hours

When using DVD-R

・You can play DVD-R on compatible DVD players by finalizing them on this unit, effectively making them into DVD-Video.

・The video is recorded in a 4:3 aspect irrespective of the video signal input.

When using DVD-R or discs with LPCM recording

When recording bilingual audio with connecting to a decoder or a digital receiver

Select the audio type either “M1” or “M2” on the connected devices. (You cannot select the audio type on this unit.)

For your reference

[RAM]

・Select the audio type both “M1” and “M2” on the connected devices. (You can also select the audio type on this unit.)

Note

[DVD-R]

・You cannot use or the DISPLAY menu to change audio type when a DVD-R is in the disc tray.

■To check the remaining time and the current mode during recording

Press [STATUS] several times.

(1) Available recording time and recording mode

(e.g.: 0:50 XPindicates 50 minutes in XP mode)

Note

・The message Cannot record. Maximum number of programs recorded.is displayed if you try to start recording when there are already 99

programs on a disc. Erase unneeded programs (DVD-RAM/DVD-R) or use a new disc to continue recording.

・Check that disc can be recorded on.

For your reference

・You can record up to 99 programs on one disc.

・You cannot change the recording mode during recording. You can change them while recording is paused, but the material is recorded as

a separate program.

・An error message appears if you try to start recording when a disc is full; the remaining time will be shown as 0:00. To continue

recording, erase unneeded programs (DVD-RAM only , Erasing programs) or use another disc.

・There are limitations when recording to DVD-R.

・Recording cannot be performed correctly if you try to record PAL system to a disc that already contains recordings using NTSC.

Prelimina Playing discs

1 Press [OPEN/CLOSE] to open the tray and insert a disc.

・Insert label-up with the arrow facing in. (With double-sided discs, load so the label for the side you want to play is facing up.)

・Insert inside the tray’s guides.

・insert one disc only.

2 Press [PLAY ] .

・The disc tray closes and play begins. (The unit takes some time to read the disc before play starts.)

・If the Resume function (page 14) is not active, playback will begin from the most recently recorded program. [RAM] [DVD-R]

･If you insert a DVD-RAM with the write-protect tab set to “PROTECT” and press [OPEN/CLOSE] , play starts automatically.

■To pause play

Press [PAUSE ] .Press again to restart playing.

■To stop play

Press [STOP ■]. (Starting play from where you stopped it)

・A screen similar to the illustrated may appear when you stop play.

Starting play from where you stopped it (Resume Function)

1 During play

Press [STOP ■] .

・The unit remembers the position.

2 Press [PLAY ] .

・Play starts from where you stopped it.

■To cancel the resume function

Press [STOP] while the unit remembers the position. (The position is also cleared when you turn the unit off.)

Fast forward and rewind

During play

Press [REV /] or [FWD /].

[/] :backward

[/] : forward

・If using the [/] or [/] button on the unit, keep pressing the button for 1 or more seconds.

・There are 5 search speeds. Each press increases the search speed.

・The search speed is maintained when you release the button.

・Press [PLAY ] to return to normal play.

・You will hear sound at speed one (only forward) when playing DVD-RAM, DVD-R.

・Sound is not heard during chasing play and simultaneous recording and play.

Slow-motion play

While paused

Press [REV /] or [FWD /].

[/] :backward

[/] : forward

・If using the [/] or [/] button on the unit, keep pressing the button for 1 or more seconds.

・There are 5 slow-motion speeds. Each press increases the slow-motion speed.

・The slow-motion speed is maintained when you release the button.

・Press [PLAY ] to return to normal play.

Frame-by-frame viewing

While paused

Press [/ ] or [/ ] .

[/ ] : backward

[/ ] : forward

・Each press shows the next or previous frame.

・Press [PLAY ] to return to normal.

Prelimina

Playing discs (continued)

Skipping

You can skip to the beginning of tracks and chapters and restart play from there.

On DVD-RAM and DVD-R, you can skip to the start of a program and start play from there.

The section between the point where recording is started and the point where it is stopped is called a “program”.

During stop, play or while paused

Press [SHIFT+”/”] or [SHIFT+”/”] .

[/ ] : backward

[/ ] : forward

Each press increases the number of skips.

For your reference

・After skipping, the unit returns to the previous state, play or pause.

・Press [PLAY] to restart play if it was paused.

(1) Play position

(2) Twice

(3) Once

(4) Chapter/track

(1) Play position/Stop position

(2) Marker

(3) Twice

(4) Once

(5) Three times

(6) The program before

(7) Current program

(8) The program after

Andere Handbücher für LQ-MD800

Inhaltsverzeichnis

Andere Panasonic DVD-Recorder Handbücher

Panasonic

Panasonic Diga DMR-XS380 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-ES16 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EZ27 Bedienungsanleitung

Panasonic

Panasonic DMR-EH59GC Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EH575 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EH58EBL Bedienungsanleitung

Panasonic

Panasonic Diga DMR-ES45 Bedienungsanleitung

Panasonic

Panasonic DMR-EX93CEG Bedienungsanleitung

Panasonic

Panasonic DMR-E20K Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EH59EM Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EX773EB Bedienungsanleitung

Panasonic

Panasonic Diga DMR-ES15EB Bedienungsanleitung

Panasonic

Panasonic DMR-ES30VEB Bedienungsanleitung

Panasonic

Panasonic DMR-EH55EC Bedienungsanleitung

Panasonic

Panasonic DIGA DMR-EX96C Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EZ48V Referenzhandbuch

Panasonic

Panasonic Diga DMR-EH50 Bedienungsanleitung

Panasonic

Panasonic DMR-E30S Bedienungsanleitung

Panasonic

Panasonic DMR-ES15EE Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EH695 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-EH585 Bedienungsanleitung

Panasonic

Panasonic DMR-E20K Bedienungsanleitung

Panasonic

Panasonic DMR-EH80V Bedienungsanleitung

Panasonic

Panasonic DMR-T6070 Bedienungsanleitung

Beliebte DVD-Recorder Handbücher anderer Marken

Pioneer

Pioneer DVR-65H-S Einrichtungshandbuch

Sony

Sony RDR-VX525 - DVDr/ VCR Combo Bedienungsanleitung

Daewoo

Daewoo DHD-4000D Bedienungsanleitung

Medion

Medion MD 40570 Bedienungsanleitung

Philips

Philips ShowView DVDR3460H Bedienungsanleitung

Sony

Sony RDR-GX355 - Tunerless DVD Recorder Bedienungsanleitung

Sony

Sony DVDirect VRD-MC3 Bedienungsanleitung

Samsung

Samsung DVD-R130/XAA Bedienungsanleitung

FUNAI

FUNAI HD-B2735 Bedienungsanleitung

Pioneer

Pioneer PRV-LX1 Technisches Handbuch

Sanyo

Sanyo DRW-1000 Bedienungsanleitung

Philips

Philips DVDR610/05 Bedienungsanleitung

JVC

JVC DR-M10 Bedienungsanleitung

Samsung

Samsung SV-DVD40 Bedienungsanleitung

Philips

Philips DVDR3355 Bedienungsanleitung

FUNAI

FUNAI FDR-90E Bedienungsanleitung

LG RC298 Bedienungsanleitung

Samsung

Samsung DVD-R130 Bedienungsanleitung