Panasonic WH-UD09HE5-1 Bedienungsanleitung

Nederlands Italiano Español English

Operating Instructions

Air-to-Water Hydromodule + Tank 2-25

Thank you for purchasing Panasonic

product.

Before operating the system, please read these

operating instructions thoroughly and keep them

for future reference.

Installation Instructions attached.

Serial number and production year please refer to

name plate.

Instrucciones de funcionamiento

Hydrokit Aire-Agua + Tanque 26-49

Gracias por comprar un producto

Panasonic.

Antes de utilizar la unidad, sírvase leer

atentamente estas instrucciones de funcionamiento

y conservarlas para futuras consultas.

Instrucciones de instalación adjuntas.

Para saber el número de serie y el año de

producción consulte la placa indicadora.

Istruzioni operative

Idromodulo aria-acqua + serbatoio 50-73

Grazie per aver acquistato un prodotto

Panasonic.

Prima di utilizzare l’unità, leggere attentamente

le istruzioni e conservare questo opuscolo per

potervi fare riferimento in futuro.

Istruzioni per l’installazione allegate.

Per il numero di serie e l’anno di produzione,

fare riferimento alla targhetta di identificazione.

Gebruiksaanwijzing

Lucht-naar-water Hydromodule + Tank 74-97

Hartelijk dank voor het aanschaffen van

een Panasonic-product.

Lees voor u het apparaat gebruikt deze

gebruikshandleiding grondig en bewaar deze voor

toekomstig gebruik.

De instructies voor installatie zijn bijgevoegd.

Voor het serienummer en jaar van fabricage

zie de naamplaat.

ACXF55-03250

Operating Instructions

Air-to-Water Hydromodule + Tank

Model No.

Indoor Unit

WH-ADC0309H3E5B

Outdoor Unit

WH-UD03HE5-1

WH-UD05HE5-1

WH-UD07HE5-1

WH-UD09HE5-1

Manufactured by:

Panasonic Appliances Air-Conditioning Malaysia Sdn. Bhd.

Lot 2, Persiaran Tengku Ampuan, Section 21,

Shah Alam Industrial Site, 40300 Shah Alam,

Selangor Darul Ehsan, Malaysia.

Table of contents

Safety precautions .........................................................4-6

Remote Controller buttons and display .........................7-9

Initialization .......................................................................9

Quick Menu ....................................................................10

Menus ........................................................................10-20

For user

1 Function setup ...................................................10-11

1.1 Weekly timer

1.2 Holiday timer

1.3 Quiet timer

1.4 Room heater

1.5 Tank heater

1.6 Sterilization

1.7 DHW mode

2 System check .........................................................12

2.1 Energy monitor

2.2 Water temperatures

2.3 Error history

2.4 Compressor

2.5 Heater

3 Personal setup ...................................................12-13

3.1 Touch sound

3.2 LCD contrast

3.3 Backlight

3.4 Backlight intensity

3.5 Clock format

3.6 Date & Time

3.7 Language

3.8 Unlock password

4 Service contact .......................................................13

4.1 Contact 1 / Contact 2

For installer

5 Installer setup > System setup ..........................14-15

5.1 Optional PCB connectivity

5.2 Zone & Sensor

5.3 Heater capacity

5.4 Anti freezing

5.5 Base pan heater

5.6 Alternative outdoor sensor

5.7 External SW

5.8 External error signal

5.9 Demand control

5.10 SG ready

5.11 External compressor SW

5.12 Circulation liquid

5.13 Heat-Cool SW

6 Installer setup > Operation setup ......................15-19

6.1 Heat

6.2 Cool

6.3 Auto

6.4 Tank

7 Installer setup > Service setup ..........................19-20

7.1 Pump maximum speed

7.2 Pump down

7.3 Dry concrete

7.4 Service contact

Cleaning instructions ......................................................21

Troubleshooting .........................................................22-23

Information .................................................................24-25

Operating conditions

HEATING

(TANK)

HEATING

(CIRCUIT)

COOLING

(CIRCUIT)

Water outlet temperature (°C)

(Min. / Max.) - / 65* 20 / 55 5 / 20

Outdoor ambient temperature (°C)

(Min. / Max.) -20 / 35 16 / 43

* Above 55 °C, only possible with backup heater operation.

When the outdoor temperature is out

of the range in the table, the heating

capacity will drop significantly and the

outdoor unit may stop operating for its

protection.

The unit will restart automatically after

the outdoor temperature returns to the

specified range.

English

Before use, make sure the system has been installed correctly by an

authorised dealer according to the given instructions.

• Panasonic Air-to-Water is a split system, consisting of two units: indoor and outdoor units. The indoor unit consist of

the hydromodule and 200L sanitary water tank.

• These operating instructions describe how to operate the system using the indoor and outdoor units.

• As for the operation of other products such as radiator, external thermo controller, and underfloor units, refer to the

operating instructions of each product.

• System could be locked to operate in HEAT mode and disable COOL mode.

• Some functions described in this manual may not be applicable to your system.

• Consult your nearest authorised dealer for further information.

*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised

service partners.

*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available)

System overview

Radiator

Shower

Fan Coil

Unit

Floor

Heating

Outdoor Unit

Power Supply

The illustrations in this manual are for explanation purposes only and may differ from the actual unit.

They are subject to change without notice for future improvement.

Note:

Not recommended to open the Front Plate.

(For authorised dealer/specialist use only)

Indoor Unit

Remote Controller

Front Plate

Safety precautions

To prevent personal injury, injury to

others or property damage, please

comply with the following:

Incorrect operation due to failure to

follow instructions below may cause

harm or damage, the seriousness of

which is classified as below:

WARNING This sign warns of

death or serious

injury.

CAUTION This sign warns of

injury or damage

to property.

The instructions to be followed are

classified by the following symbols:

This symbol denotes

an action that is

PROHIBITED.

These symbols denote

actions COMPULSORY.

WARNING

Indoor unit and outdoor

unit

This appliance may be used by

children aged from 8 years and

above and persons with reduced

physical, sensory or mental

capabilities or lack of experience

and knowledge if they have been

given supervision or instruction

concerning use of the appliance

in a safe way and understand

the hazards involved. Children

shall not play with the appliance.

Cleaning and user maintenance

shall not be made by children

without supervision.

Please consult an authorised

dealer or specialist to clean the

internal parts, repair, install,

remove and reinstall the unit.

Improper installation and

handling will cause leakage,

electric shock or fire.

Confirm with an authorised

dealer or specialist on usage of

any specified refrigerant type.

Using refrigerant type other than

the specified may cause product

damage, burst and injury etc.

English

Do not install the unit in

a potentially explosive or

flammable atmosphere. Failure

to do so could result in fire.

Do not insert your fingers

or other objects into the

indoor or outdoor unit; the

rotating parts may cause

injury.

Do not touch the outdoor unit

during lightning, it may cause an

electric shock.

Do not sit or step on the

unit, you may fall down

accidentally.

Do not install the indoor unit

outdoors. This is designed for

indoor installation only.

Power supply

Do not use a

modified cord, joint

cord, extension

cord or unspecified

cord to prevent

overheating and fire.

To prevent overheating, fire or

electric shock:

• Do not share the same power

outlet with other equipment.

• Do not operate with wet hands.

• Do not bend or twist power

supply cord.

If the supply cord is damaged,

it must be replaced by the

manufacturer, service agent or

similarly qualified persons in

order to avoid a hazard.

This unit is equipped with

Residual Current Circuit

Breaker/Earth Leakage Circuit

Breaker (RCCB/ELCB). Ask

an authorised dealer to check

RCCB/ELCB operation regularly,

especially after installation,

inspection, and maintenance.

RCCB/ELCB malfunction may

result in electric shock and/or

fire.

It is strongly recommended that

Install Residual Current Device

(RCD) on-site to prevent electric

shock and/or fire.

Before obtaining access to

terminals, all supply circuits must

be disconnected.

Stop using the product if any

abnormality/failure occurs and

disconnect the power supply.

(Risk of smoke/fire/electric

shock)

Examples of abnormality/failure

• RCCB/ELCB trips frequently.

• Burning smell is observed.

• Abnormal noise or vibration of

the unit is observed.

• Hot water leaks from the indoor

unit.

Contact your local dealer

immediately for maintenance/

repair.

Wear gloves during inspection

and maintenance.

Safety precautions

This equipment must be earthed

to prevent electrical shock or fire.

Prevent electric shock by

disconnecting the power supply

- Before cleaning or servicing.

- When extended non-use.

This appliance is for multiple

uses. To avoid electric shock,

burn and/or fatal injury, make

sure to disconnect all power

supplies before accessing any

terminal in the indoor unit.

CAUTION

Indoor unit and outdoor

unit

Do not wash the indoor unit

with water, benzine, thinner

or scouring powder to avoid

damage or corrosion on the unit.

Do not install the unit close

to any combustibles or at

bathroom. Otherwise, it may

cause electric shock and/or fire.

Do not touch the water discharge

pipe of the indoor unit during

operation.

Do not place any material on the

unit or under it.

Do not touch the sharp

aluminium fin; sharp parts

may cause injury.

Do not use the system during

sterilisation in order to prevent

scalding with hot water, or

overheating of shower.

Prevent water leakage by

ensuring that the drainage pipe

is connected properly.

After a long period of use, make

sure the installation rack is not

deteriorated. The deteriorated

rack may cause the unit to fall

down.

Ask an authorised dealer

to determine the level of

sterilisation function field settings

according to the local laws and

regulations.

Remote Controller

Do not wet the Remote

Controller. Failure to do so may

result in electric shock and/or

fire.

Do not press the buttons on the

Remote Controller using hard

and sharp objects. Failure to do

so may cause damage to the

unit.

Do not wash the Remote

Controller using water, benzine,

thinner or scouring powder.

Do not inspect or maintain the

Remote Controller by yourself.

Consult an authorised dealer in

order to prevent personal injury

caused by incorrect operation.

English

Remote Controller buttons and display

Buttons / Indicator

Quick Menu button

(For more details, refer to the separate

Quick Menu Guide.)

2Back button

Returns to the previous screen

3LCD Display

4Main Menu button

For function setup

5ON/OFF button

Starts/Stops operation

Operation indicator

Illuminates during operation, blinks during

alarm.

Press centre

No glove

No pen

Cross key buttons

Selects an item.

Enter button

Fixes the selected content.

Down

Left Right

Safety precautions / Remote Controller buttons and display

Remote Controller buttons and display

Display

1Mode selection

AUTO • Depending on the preset outdoor

temperature, the system selects

HEAT or *1COOL operation mode.

Auto Heat Auto Cool

*1, *2 COOL • The fan coil unit is either turned

ON or OFF.

• The outdoor unit provides cooling

to the system.

AUTO

+ TANK

• Depending on the preset outdoor

temperature, the system selects

HEAT + TANK or *1COOL + TANK

operation mode.

Auto Heat Auto Cool

*1, *2 COOL

+ TANK

• The outdoor unit provides cooling

to the system.

• The system controls the booster

heater in the water tank.

HEAT • The panel/floor HEAT operation is

either turned ON or OFF.

• The outdoor unit provides heat to

the system.

TANK • The water tank is either turned

ON or OFF.

• The outdoor unit provides heat to

the water tank.

HEAT

+ TANK

• The outdoor unit provides heat to

the water tank and the system.

• This mode can be selected only

when the water tank is installed.

* The direction icons point to the currently

active mode.

• Room operation / Tank operation.

• Deice operation.

2Operation icons

The status of operation is displayed.

Icon will not display (under operation OFF screen) whenever operation is OFF except weekly timer.

Holiday operation status Weekly Timer operation status Quiet operation status

Zone:Room Thermostat

→Internal sensor status Powerful operation status Demand Control or

SG ready or SHP status

Room Heater status Tank Heater status

2 43

*1 The system is locked to operate without COOL mode. It can be unlocked only by authorised installers or our authorised service partners.

*2 Only displayed when COOL mode is unlocked (This means when COOL mode is available).

English

Initialization

Before starting to install the various menu settings, please initiate the Remote Controller by selecting the language of

operation and installing the date and time correctly.

It is recommended that the installer conducts the following initialization of the Remote Controller.

Selecting the language LCD blinking

Press and wait while the display is

initializing.

1Scroll with and to select the language.

2Press to confirm the selection.

Setting the clock

1Select with or how to display the time,

either 24h or am/pm format (for example, 15:00

or 3 pm).

2Press to confirm the selection.

3Use and to select year, month, day,

hour and minutes. (Press to confirm the

selection each time.)

4Once the time is set, time and day will appear

on the display even if the Remote Controller is

turned OFF.

3Temperature of each zone

4Time and day

5Water Tank temperature

6Outdoor temperature

7Sensor type/Set temperature type icons

Water Temperature

→Compensation curve

Water Temperature

→Direct Pool only

Room Thermostat

→External

Room Thermostat

→Internal

Remote Controller buttons and display / Initialization

Menus For user

Select menus and determine settings according to the system

available in the household. All initial settings must be done by an

authorised dealer or a specialist. It is recommended that all alterations

of the initial settings are also done by an authorised dealer or a

specialist.

• After initial installation, you may manually adjust the settings.

• The initial setting remains active until the user changes it.

• The Remote Controller can be used for multiple installations.

• Ensure the operation indicator is OFF before setting.

• The system may not work properly if set wrongly.

Please consult an authorised dealer.

To display <Main Menu>:

To select menu:

To confirm the selected content:

After the initial settings have been completed, you can select a quick menu from the following options and edit the setting.

1Press to display the quick menu.

Force DHW Powerful Quiet Force Heater

Weekly Timer Force Defrost Error Reset R/C Lock

2Use to select menu.

3Press to turn on/off the select menu.

Quick Menu

Menu Default Setting Setting Options / Display

1 Function setup

1.1 Weekly timer

Once the weekly timer is set up,

User can edit from Quick Menu.

To set up to 6 patterns of

operation on a weekly basis.

• Disabled if Heat-Cool SW is

pressed or if Force Heater

is on.

Timer setup

Select day of the week and

set the patterns needed

(Time / Operation ON/OFF / Mode)

Timer copy

Select day of the week

Andere Handbücher für WH-UD09HE5-1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Panasonic Wärmepumpe Handbücher

Panasonic

Panasonic UX09*E5 Series Bedienungsanleitung

Panasonic

Panasonic WH-MXF09D3E8 Bedienungsanleitung

Panasonic

Panasonic Aquarea WH-SXC09H3E5 Bedienungsanleitung

Panasonic

Panasonic WH-UD09CE8 Bedienungsanleitung

Panasonic

Panasonic WH-SDC12F6E5 Bedienungsanleitung

Panasonic

Panasonic WH-MXC09D3E5 Bedienungsanleitung

Panasonic

Panasonic Secon WH-MXC16J9E8 Bedienungsanleitung

Panasonic

Panasonic S*C09*3E8 Series Bedienungsanleitung

Panasonic

Panasonic WH-UXZ09KE5 Series, WH-UXZ12KE5 Series Bedienungsanleitung

Panasonic

Panasonic WH-MDF14C6E5 Bedienungsanleitung

Panasonic

Panasonic WH-SDC0309K3E5 Bedienungsanleitung

Panasonic

Panasonic WH-MDC09C3E8 Bedienungsanleitung

Panasonic

Panasonic WH-UD07HE5 Bedienungsanleitung

Panasonic

Panasonic WH-MHF09G3E8 Bedienungsanleitung

Panasonic

Panasonic WHUD30BE51 Bedienungsanleitung

Panasonic

Panasonic PAW-VP1000LDHW Bedienungsanleitung

Panasonic

Panasonic WH-MDC09C3E8 Bedienungsanleitung

Panasonic

Panasonic WH-SDC12K6E5 Bedienungsanleitung

Panasonic

Panasonic WH-MXC12G9E8 Bedienungsanleitung

Panasonic

Panasonic AQUAREA WH-ADC0912K6E5AN Bedienungsanleitung

Panasonic

Panasonic WH-MDF09C3E8 Bedienungsanleitung

Panasonic

Panasonic WH-SDC03E3E5 Series Bedienungsanleitung

Panasonic

Panasonic WH-MHF09G3E5 Bedienungsanleitung

Panasonic

Panasonic Aquarea WH-ADC0309J3E5B Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung

Bryant

Bryant Preferred Series Bedienungsanleitung