Panasonic WH-UD28AE Bedienungsanleitung

F566146

HEAT

SETTING

STATUS

PUMPDW

WATERINLET ERROR

OFF/ON

WATER OUTLET OUTDOOR

0.2

0.4

0.3

0.1

MPa

Operating Instructions

Air-to-Water Heatpump

Indoor Unit Outdoor Unit

WH-SD24AE WH-UD24AE

WH-SD28AE WH-UD28AE

ENGLISH

Before operating the unit, read these operating instructions thoroughly and keep them for future reference.

Before operating the unit, make sure the installation has been carried out correctly by authorized dealer correctly and

precisely following the installation instructions given.

2 ~ 11

SVENSKA

Innan du använder enheten, läs noga igenom denna bruksanvisning och spara den för framtida bruk.

Innan du använder enheten, se till att installationen har utförts noggrant och korrekt av auktoriserad återförsäljare som

följt de givna installationsinstruktionerna.

12 ~ 21

NORSK

Les bruksanvisningen nøye før du bruker denne enheten, og oppbevar den for fremtidig bruk.

Før du bruker enheten, må du forsikre deg om at autorisert forhandler har utført korrekt og presis installasjon og har

fulgt installasjonsinstruksjonene som er gitt.

22 ~ 31

SUOMI

Lue nämä käyttöohjeet huolellisesti ennen yksikön käyttämistä ja säilytä ne tulevaisuutta varten.

Varmista ennen laitteen käyttöä, että asennuksen on suorittanut valtuutettu jälleenmyyjä ja että se on tehty oikein ja

tarkasti annettuja asennusohjeita noudattaen.

32 ~ 41

DANSK

Læs brugsanvisningen grundigt igennem før du benytter anlægget og gem den til fremtidig brug.

Sørg for, at anlægget er installeret korrekt af en autoriseret forhandler i overensstemmelse med de følgende

instruktioner, før anlægget tages i brug.

42 ~ 51

Unauthorized copying and distribution is a violation

of law.

HEAT

FORC

HEATER1

HEATER2

SETTING

STATUS

PUMPDW

WATERINLETERROR

OFF/ON

WATEROUTLETOUTDOOR

0.2

0.4

0.3

0.1

MPa

SAFETY PRECAUTIONSSAFETY PRECAUTIONS

DEFINITION

The instructions to be followed are classiﬁed by the following symbols:

This symbol denotes an action

that is PROHIBITED.

These symbols denote actions

that are COMPULSORY.

To prevent personal injury, injury to others, or property damage, please observe the following.

Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classiﬁed as below:

Warning This sign warns of death or serious injury.

Outdoor Unit

• Do not insert your ﬁngers or other objects

into the unit, rotating parts may cause

injury.

Indoor Unit

• Do not install, remove and reinstall the unit by yourself; improper

installation will cause leakage, electric shock or ﬁre. Please consult

authorized dealer for the installation work.

• Do not attempt to repair the unit by yourself. Otherwise, it may cause

injury if it is mishandling.

• Do not install the unit at outdoor. This is designed for indoor

installation only.

• This unit is equipped with Residue Current Circuit Breaker (RCCB).

It is strongly recommended to check the operation of the RCCB

after installation and periodically after servicing or maintenance by

authorized dealer to ensure it is in good working order. Otherwise, it

may cause electrical shock or ﬁre in case of malfunction.

Power Supply

• Do not share the same power outlet with

other equipment.

• Do not modify power cords.

• Do not use extension cords.

• Do not operate with wet hands.

• Use the speciﬁed power supply cord.

• If the power supply cord is damaged, it

must be replaced by the manufacturer,

its service agent or similarly qualiﬁed

persons in order to avoid hazard.

• In case of emergency or presence of

abnormal conditions (burnt smell, etc),

turn off the power supply, and consult

authorized dealer.

Air outlet

Air inlet

NOTE :

The illustrations in this manual are

for explanation purposes only and

may differ from the actual unit. It is

subjected to change without notice

for future improvement.

ENGLISH

Thank you for purchasing

Product

TABLE OF CONTENTS

SAFETY PRECAUTIONS 2~3

REGULATORY INFORMATION 4

PRODUCT OVERVIEW 5

HOW TO OPERATE 6~7

CARE & CLEANING 8

TROUBLESHOOTING 9~10

Indoor Unit

• Do not install the unit in a potentially explosive atmosphere.

• Do not install the unit close to any combustible equipment or at

bathroom. Otherwise, it may cause electric shock or ﬁre.

• Do not touch the water discharge pipe at the indoor unit during

operation.

• Do not place anything on top or beneath of the unit.

• Ensure that the drainage pipe is connected properly. Otherwise,

leakage may occur.

Caution This sign warns of injury or damage to property.

Control Panel

• Do not let the control panel get wet.

Otherwise, it may cause electric shock or ﬁre.

• Do not press the buttons on the control panel

with hard, pointed objects. Otherwise, it may

damage the unit.

• Do not wash the control panel with water,

benzene, thinner or scouring powder.

• Do not inspect or service the control panel by

yourself. Please consult authorized dealer.

Otherwise, it may cause injury if mishandling.

Outdoor Unit

• Do not sit or step on the unit, you may fall

down accidentally.

• Do not touch the sharp aluminium ﬁn, sharp

parts may cause injury.

• Check the installation rack periodically to

make sure that it is not damaged.After long

periods of use, the strength of the installation

rack may have deteriorated.

Power Supply

• Switch off the power supply before cleaning

or servicing.

• Turn off the power supply if the unit is not

used for a long period of time.

• This unit is equipped with a built-in surge

protective device. However, in order to further

protect your unit from being damaged by

abnormally strong lightning activity, you may

want to disconnect it from the power supply.

Do not touch the unit during lightning, it may

cause electric shock.

• It is recommended to wear gloves during

servicing or maintenance in order to avoid

hazard.

Indoor Outdoor

Water outlet temperature (°C) Ambient temperature (°C)

* DBT * WBT

HEATING Maximum 55 24 18

Minimum 25 -20 -

* DBT : Dry bulb temperature

* WBT : Wet bulb temperature

NOTICE : When the outdoor temperature is out of the above temperature range, the heating capacity will drop signiﬁcantly

and outdoor unit might stop for protection control.

OPERATION CONDITION

REGULATORY INFORMATIONREGULATORY INFORMATION

Information for Users on Collection and Disposal of Old Equipment

These symbols on the products, packaging, and/or accompanying documents mean that used electrical and

electronic products should not be mixed with general household waste.

For proper treatment, recovery and recycling of old products, please take them to applicable collection points,

in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.

By disposing of these products correctly, you will help to save valuable resources and prevent any potential

negative effects on human health and the environment which could otherwise arise from inappropriate waste

handling.

For more information about collection and recycling of old products, please contact your local municipality,

your waste disposal service or the point of sale where you purchased the items.

Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.

For business users in the European Union

If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further

information.

[Information on Disposal in other Countries outside the European Union]

These symbols are only valid in the European Union. If you wish to discard these items, please contact your

local authorities or dealer and ask for the correct method of disposal.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by

a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

HEAT

SETTING

STATUS

PUMPDW

WATERINLET ERROR

OFF/ON

WATEROUTLET OUTDOOR

0.2

0.40

0.30.1

MPa

ENGLISH

PRODUCT OVERVIEWPRODUCT OVERVIEW

Air-to-Water Heatpump

Indoor Unit

Water Pressure Gauge

0.2

0.40

0.30.1

MPa

• Do not press or hit the glass

cover with hard, pointed

objects. This may damage the

unit.

• Ensure that the water

pressure is between 0.05 to

0.2MPa.

• In case the water pressure is

out of the above range, please

consult authorized dealer.

Control Panel

HEAT

SETTING

STATUS

PUMPDW

WATER INLET ERROR

OFF/ON

WATER OUTLET OUTDOOR

Open the cover to

use the buttons

WATER OUTLET OUTDOOR

HEAT

SETTING

STATUS

PUMPDW

WATER INLET ERROR

SET

SELECT

CANCEL ERROR

RESET

SETTING STATUS

PUMPDW

CHECK

OFF/ON

3 4

11 14

1OFF/ON Button 8System Setting Indicator

2Operation LED 9System Status Indicator

3Water Outlet Temperature Display 10 System Pumpdown Indicator

4Water Inlet Temperature Display 11 System Setting Buttons

5OutdoorAmbient Temperature Display 12 Error Reset Button

6System Error Display 13 System Status Check Buttons

7Heat Mode Indicator 14 System Pumpdown Button

HOW TO OPERATEHOW TO OPERATE

Basic Operation

Note

• PanasonicAir-to-Water Heatpump is a split system consisting only of an indoor unit and an outdoor unit.

• This manual describes how to operate the heatpump system between indoor and outdoor units only.

• Other operation such as water tank, radiator and underﬂoor system, please refer to its respective manufacturer

operation manuals.

WATER INLET ERROR

SET

SETTING STATUS

CHECK

OFF/ON

Operation Start / Stop

• The unit starts by pressing

OFF/ON

• When unit is ON, operation LED is lit and the actual

temperature for water outlet, water inlet and outdoor

ambient are shown on the control panel display.

• Press

OFF/ON

again to stop the operation.

Operation details (Default setting)

• Operation takes place under default settings as follows:

-When Outdoor ambient temperature (Out Lo) is less than 0°C, water outlet set temperature (H2O Lo) is 50°C.

When Outdoor ambient temperature (Out Hi) is more than 15°C, water outlet set temperature (H2O Hi) is 32°C.

• In between the speciﬁed outdoor ambient temperature range (Out Lo and Out Hi), the system will automatically adjust

the water outlet temperature between speciﬁed range (H2O Lo and H2O Hi).

• Lower outdoor ambient temperature will result in higher water outlet temperature and vice versa.

Optional Settings

ERROR

RESET

Error code reset

• Not usable during normal operation.

PUMPDW

System Pump Down

• Not usable during normal operation.

• If accidentally pressed the

PUMPDW

, press

OFF/ON

to stop the pump down operation.

ENGLISH

Advance Operation

Recommendation

• It strongly recommended to change the temperature range by authorized dealer. The temperature range for water outlet

temperature and outdoor ambient temperature could be set by control panel.

Perform the steps below to set preferred temperature range.

SET

SELECT

CANCEL ERROR

RESET

SETTING STATUS

PUMPDW

CHECK

1,5

2,4

STEP 1: Press

SET

for 5 seconds to enter SETTING mode. “SETTING” indicator is ON.

STEP 2: Press or to choose a parameter.

H2O Lo: Water outlet set

temperature at low outdoor

ambient set temperature Selection range:

25°C ~ 55°C

HEAT

SETTING

STATUS

PUMPDW

H2O Hi: Water outlet set

temperature at high outdoor

ambient set temperature

HEAT

SETTING

STATUS

PUMPDW

Selection range:

25°C ~ 55°C

Out Lo: Low outdoor

ambient set temperature

HEAT

SETTING

STATUS

PUMPDW

Selection range:

-15°C ~ 15°C

Out Hi: High outdoor

ambient set temperature

HEAT

SETTING

STATUS

PUMPDW

Selection range:

-15°C ~ 15°C

Note: Please make sure High outdoor ambient set temperature (Out Hi) is always higher than Low outdoor

ambient set temperature (Out Lo).

STEP 3: After selecting the desired parameter,press

SELECT

to enter the parameter. “ ” indicator will blink when a

parameter is selected.

STEP 4: Press or to set the desired temperature.

STEP 5: Press

SET

again to conﬁrm the setting.

• Repeat steps 2 to 5 to set other parameters.

• Press

CANCEL

or wait 30 seconds to exit SETTING mode.

• The setting temperature will be stored in the system once conﬁrm.

• “SETTING” mode cannot be activated when the “PUMPDW” and “STATUS” indicator is ON.

CARE & CLEANINGCARE & CLEANING

CAUTION • Switch off the power supply before cleaning.

Indoor Unit & Control Panel

• Wipe the unit gently with a soft, dry cloth.

Outdoor Unit

• Do not obstruct the air inlet and air outlet vents, it may cause low performance or breakdown. Please remove obstacles to

assure the ventilation.

• During winter, please clean and remove the snow near outdoor unit so that the snow does no cover the air inlet and air

outlet vents.

FOR SEASONAL INSPECTIONAFTER EXTENDED NON-USE

• In order to ensure optimal performance of the unit, seasonal inspections on the unit and ﬁeld wiring have to be carried

out at regular intervals. This maintenance should be carried out by authorized dealer.

• Clear any obstruction at the air inlet and air outlet vents of outdoor unit.

FOR EXTENDED NON-USE

• Turn off the power supply.

ENGLISH

Symptom

Check

Heating operation is not working efﬁciently. • Set the temperature correctly.

• Is the panel heater valve closed.

• Clear any obstruction at the air inlet and air outlet vents of outdoor unit.

Noisy during operation. • Check if the unit has been installed at an incline or the cover is not

closed properly.

The unit does not work. • Check if the circuit breaker is tripped.

Operation LED is no lit or control panel display

is blank. • Is the power supply off or power failure.

Check the following before calling for servicing.

TROUBLESHOOTINGTROUBLESHOOTING

Symptom

Cause

Water ﬂowing sound during operation. • Refrigerant ﬂow inside the unit.

Operation is delayed a few minutes after

restart. • The delay is a protection to the unit’s compressor.

Outdoor unit emits water/steam. • Condensation or evaporation occurs on pipes.

Outdoor unit emits steam during heating

mode. • This is due to defrost operation happens at the heat exchanger.

Outdoor unit does not operate. • When the outdoor temperature is out of the operation condition range,

the heatpump system enter protection control.

System difﬁcult to heat-up. • When heating is operated by indoor unit together with ﬂoor heating or

panel heater simultaneously, there may be case where warm water

temperature is getting lower and cause ﬂoor heating or panel heater

heat-up is weaken.

• When outdoor air temperature is low, it may be difﬁcult to get warm.

• Is the snow pile blocking the discharge outlet or intake inlet of outdoor

unit.

• When water outlet set temperature is low, it may be difﬁcult to get warm.

System cannot get warm instantly. • Due to the nature of the heatpump system, it may take some time to

heat-up the water if the unit is operated from cold-start.

Operation starts after power resumes. • Auto restart is in function and operates under.

The following symptoms do not indicate malfunction.

NON SERVICEABLE CRITERIAS

TURN OFF POWER SUPPLY then please consult authorized dealer under the following conditions:

• Abnormal noise during operation.

• Water/foreign particles have entered the control panel.

• Water leaks from Indoor unit.

• Circuit breaker switches off frequently.

• Power cord becomes unnaturally warm.

• Switches or buttons are not functioning properly.

The operation LED blinks and error code appear on control panel display

WATER INLET ERROR

• Turn the unit off and reveal the error code to authorized dealer.

Perform the steps below to check system status

SET

SELECT

CANCEL ERROR

RESET

SETTING STATUS

PUMPDW

CHECK

STEP 1: Press

CHECK

for 5 seconds to enter STATUS mode.

STEP 2: Press or to check the Compressor Running Frequency or Error History.

• Press

CANCEL

or wait 30 seconds to exit STATUS mode.

• Once STATUS mode is entered, “STATUS” indicator is ON.

• STATUS mode cannot be activated when the “SETTING” and “PUMPDW” indicator is ON.

TROUBLESHOOTINGTROUBLESHOOTING

Andere Handbücher für WH-UD28AE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Wärmepumpe Handbücher

Panasonic

Panasonic S-80MW1E5 Service-Handbuch

Panasonic

Panasonic Aquarea WH-SDC0305J3E5 Bedienungsanleitung

Panasonic

Panasonic WH-SDH07C3E5 Bedienungsanleitung

Panasonic

Panasonic WH-ADC0309K3E5 Bedienungsanleitung

Panasonic

Panasonic 2WAY Multi Series Betriebsanleitung

Panasonic

Panasonic WH-ADC0309K6E5 Bedienungsanleitung

Panasonic

Panasonic WH-MXF09D3E8 Bedienungsanleitung

Panasonic

Panasonic PAW-VP1000LDHW Bedienungsanleitung

Panasonic

Panasonic ADC0916H9E8 Bedienungsanleitung

Panasonic

Panasonic WH-MHF12G6E5 Bedienungsanleitung

Panasonic

Panasonic AQUAREA WH-ADC0912K6E5AN Bedienungsanleitung

Panasonic

Panasonic WH-MXF09D3E5 Bedienungsanleitung

Panasonic

Panasonic WH-SXC16F9E8 Bedienungsanleitung

Panasonic

Panasonic WH-UX09FE5 Bedienungsanleitung

Panasonic

Panasonic WH-UD12HE5 Series Bedienungsanleitung

Panasonic

Panasonic UX09*E5 Series Bedienungsanleitung

Panasonic

Panasonic WH-ADC0309J3E5 Technisches Handbuch

Panasonic

Panasonic Aquarea WH-SXC09H3E5 Bedienungsanleitung

Panasonic

Panasonic CS-E12NKUAW Betriebsanleitung

Panasonic

Panasonic WH-MHF09G3E5 Bedienungsanleitung

Panasonic

Panasonic WH-MXC09J3E5 Bedienungsanleitung

Panasonic

Panasonic WH-SDC12H9E8 Bedienungsanleitung

Panasonic

Panasonic WH-SDC03E3E5 Series Bedienungsanleitung

Panasonic

Panasonic WH-MDC05H3E5 Bedienungsanleitung

Beliebte Wärmepumpe Handbücher anderer Marken

MICROWELL

MICROWELL HP 1000 GREEN Bedienungsanleitung

Sanyo

Sanyo SAP120FCH Bedienungsanleitung

Daikin

Daikin EHYHBH05AA Bedienungsanleitung

Bryant

Bryant 544B Bedienungsanleitung

Airxcel

Airxcel 45000 Series Handbuch

Mitsubishi Electric

Mitsubishi Electric PUZ-SWM60VAA Bedienungsanleitung

Dimplex

Dimplex LI 16I-TUR Benutzerhandbuch

Carrier

Carrier WSHP Open v3 Kurzanleitung zur Einrichtung

TGM

TGM CTV14CN018A Bedienungsanleitung

Carrier

Carrier 38MGQ Series Bedienungsanleitung

Kokido

Kokido K2O K880BX/EU Fehlerbehebungshandbuch

Viessmann

Viessmann VITOCAL 300-G PRO Type BW 2150 Kurzanleitung

Carrier

Carrier 48EZN Bedienungsanleitung

Viessmann

Viessmann KWT Vitocal 350-G Pro Series Betriebsanleitung

Ariston

Ariston NIMBUS Bedienungsanleitung

Weishaupt

Weishaupt WWP L 7 Benutzerhandbuch

GE Zoneline AZ85H09EAC Bedienungsanleitung

Bryant

Bryant Preferred Series Bedienungsanleitung