Panasonic SCRT50 - HOME THEATER Bedienungsanleitung





Operating Instructions

Recordable DVD

Home Theater System

Model No. SC-RT50

PRQT8656-P

Positioning and connectionof

speakers

Front speaker assembly

Video connections

Radio and AC cord connections

Plug-in Auto Tuning

Television operation Speaker installation options

Other settings and optional

speaker installation

(Perform if necessary)

All necessary steps of setup are completed.

Please see the Operations Guide for recording and playback operation.

·························· 14

Selecting television type

···································· 14

Channel captions

··················· 15

When other Panasonic products

respond to this remote control

································· 15 ······ Back cover

Set Clock Manually ·································· 15

·································· 15

Adjust Time Zone

RQT8656-P.indd1RQT8656-P.indd1 2006/02/2816:52:062006/02/2816:52:06







Cable

Thread the speaker cable through the base.

For quicker threading, loosely fold the cable in half (do

not crease), pass the folded portion through the hole,

and then pull the rest of the cable through the base.

2 Front speakers 2 Stands

(with cable)

2 Bases 6 Screws

Included parts to be used

2 Sliders

For assembly, use a Phillips-head screwdriver.

Make sure you have all the indicated components before starting assembly, positioning, and connection.

There is no difference between the right and left speakers and stands.

For optional wall mount, refer to back cover.

Preparation

Attach the stand to the base.

Insert the stand into the base

while gently pulling on the end

of the cable.

Base Cable

The speaker height

can be adjusted.

Min: 110 cm (431/4)

Max: 135 cm (535/32)

Attach the speaker to the stand.

Feed the speaker cable (the shorter part) into the

bottom of the speaker and through the slot at the rear.

Thread the cable through the middle hole of the slider and

fasten with the two screws.

Cable

Stand

Speaker

Cable

Slider

Screws

Tighten securely.

Large hole

Rounded side

While pulling the speaker cable up through the slot,

slide the speaker stand into the bottom of the speaker.

Front speaker assembly

Place the polyfoam underneath the speaker for stability while attaching the speaker to the stand.

Polyfoam

RQT8656-P.indd2RQT8656-P.indd2 2006/02/2816:52:082006/02/2816:52:08



Cable

Screw

Tighten securely.

Secure the stand to the base.

Slide the speaker cable into the groove.

Adjust the speaker height.

Preparation

Attach screw eyes (not included) to secure the front speakers to the

wall (diagram right).

You will need to obtain the appropriate screw eyes to match the

walls or pillars to which they are going to be fastened.

The walls or pillars to which the screw eyes are going to be

fastened should be capable of supporting 30 kg (66 lbs). Consult a

qualiﬁed housing contractor concerning the appropriate procedure

when attaching to a concrete wall or a surface that may not

have strong enough support. Improper attachment may result in

damage to the wall or speakers.

To prevent the speaker from falling over, thread the string (not

included) from the wall to the speaker as shown and tie tightly.

Loosen the screws until the speaker can slide up

and down the stand.

Raise the speaker to the desired height, and then

retighten the screws.

Connect the speaker cable.

Phillips-head

screwdriver

: White

: Blue

Push!

Press the speaker cable into the

groove.

Push excess cable back through

the slider hole.

String (not included)

Screw eye (not included)

Wall

Rear of the speaker

Approx. 150 mm

(529/32)

Secure the speaker cable to

the base.

Preventing the front speakers from falling over

Insert the wire fully.

RQT8656-P.indd3RQT8656-P.indd3 2006/02/2816:52:082006/02/2816:52:08

(R)

(L)

SURROUND

Rch

SURROUND

Rch

FRONT

WOOFER

SUB

Lch

Lch Lch

CENTER

Lch

SURROUND

FRONT

SUB

WOOFER

FRONT

CENTER

Preparation

Check to make sure that the screws on the bottom of the front

speaker bases and the slider screws on the back of the front

speakers are fastened tightly.

Positioning for best effect

How you set up your speakers can affect the bass and the sound

ﬁeld.

Note the following points:

Place the front, center, and surround speakers at

approximately the same distance from the seating position.

The angles in the diagram below are approximate.



Place speakers on ﬂat secure bases.

Placing speakers too close to ﬂoors, walls, and corners can result

in excessive bass. Cover walls and windows with thick curtains.

Set the speakers up on an even surface to prevent them from

falling.

Take proper precautions to prevent the speakers from falling over

if you cannot set them up on an even surface.

Left and right speakers are interchangeable, but front and

surround speakers are not.

Note

2 Sheets of speaker

cable stickers

4 Speaker cables

2short cables: For center speaker and

subwoofer

2long cables: For surround speakers

Front speakers Surround speakers Center speaker Subwoofer

Place the speakers.

Front speakers

Center speaker

Vibration caused by

the center speaker can

disrupt the picture if it

is placed directly on the

television.

Put the center speaker on

a rack or shelf.

To prevent the speaker

from falling, do not place

the speaker directly on

top of the television.

Main unit

Note

Keep your speakers at least 10 mm (13/32)

away from the main unit for proper ventilation.

To allow for proper ventilation and to maintain

good airﬂow around the main unit, position it

with enough space on all sides.

Do not block the ventilation holes of the main

unit.

Do not set anything on top of the main unit.

Subwoofer

Place to the right or left of

the television on the ﬂoor so

that it won't cause vibration.

Leave about 30 cm (1113/16)

from the television.

Surround

speakers

Included parts to be used

Use only supplied speakers

Using other speakers can damage the unit and sound quality will

be negatively affected.

Caution



Do not stand on the

base.

Be cautious when

children are near.



Do not touch the netted

area of the speakers.

e.g.

Surround speakers

Positioning and connection of speakers

RQT8656-P.indd4RQT8656-P.indd4 2006/02/2816:52:092006/02/2816:52:09









SURROUND

Lch

SURROUND

Lch

Connect the speaker cables to the main unit and speakers.

Notes on speaker use



You can damage your speakers and shorten their useful life if you play sound at high

levels over extended periods.



Reduce the volume in the following cases to avoid damage:

–When playing distorted sound.

–When the speakers are reverberating due to a record player, noise from FM

broadcasts, or continuous signals from an oscillator, test disc, or electronic instrument.

–When adjusting the sound quality.

–When turning the unit on or off.

If irregular coloring occurs on your television

The supplied speakers are designed to be used close to a television, but the picture

may be affected with some televisions and setup combinations.

If this occurs, turn the television off for about 30 minutes.

The television’s demagnetizing function should correct the problem. If it persists, move

the speakers further away from the television.

Inserting speaker cables

Front speaker (L)

Front speaker (R)

Surround

speaker (L)

Surround

speaker (R)

Center speaker

Subwoofer

Be careful not to cross (short-

circuit) or reverse the polarity

of the speaker wires as doing

so may damage the speakers.

: White

: Blue

Set your surround sound free!

Optional Panasonic wireless accessory (e.g. SH-FX60)

You can enjoy surround speaker sound wirelessly when you use the optional Panasonic wireless accessory (e.g. SH-FX60).

For details, please refer to the operating instructions for the optional Panasonic wireless accessory.

Attach the speaker cable stickers (included) to each speaker cable to

make connection easier.

Speaker cable sticker

Insert the wire fully.

Preparation

Insert the speaker cables into speaker cable terminal in accordance with the stickers you just attached and the diagram below.

Caution

Main unit

Blue White

Click!

DIGITAL TRANSCEIVER slot for the optional

Panasonic wireless accessory (below)

Caution

The main unit and supplied speakers are

only to be used as indicated in this setup.

Failure to do so may lead to damage to

the ampliﬁer and/or the speakers, and may

result in the risk of ﬁre. Consult a qualiﬁed

service person if damage has occurred

or if you experience a sudden change in

performance.

Do not attempt to attach these speakers

to walls using methods other than those

described in this manual.

Insert the wire

fully.

: White

: Blue

RQT8656-P.indd5RQT8656-P.indd5 2006/02/2816:52:092006/02/2816:52:09

Te l e vi s i o n

VCR

Television

Main unit

VIDEO

VHF/UHF

RF IN

VHF/UHF

RF IN

VIDEO OUT

VHF/UHF

RF OUT

#7&+1.

#7&+14

176

VIDEO

VHF/UHF

RF IN

Red White Yellow

The picture signal from the main unit does not go through the RF

OUT terminal to the television. Make sure you connect one of the

following terminals on the main unit to the television: the VIDEO OUT

terminal, the S VIDEO OUT terminal or the COMPONENT VIDEO

OUT terminal.

Refer to page 9 if the antenna connector doesn't match.

Main unit’s RF OUT terminal

Video signals fed

through video cassette

recorders will be

affected by copyright

protection systems and

the picture will not be

shown correctly on the

television.

Connect the main unit directly to the television

BConnection with a television and video cassette recorder

This section includes diagrams of four common methods of

connection (A–D, pages 6–7). Please connect using the one

that best suits you.

Connecting to a TV with an HDMI (High Deﬁnition Multimedia

Interface) terminal (page 10).

Before doing any connection, turn off all equipment and read

the appropriate operating instructions.

Peripheral equipment and optional cables are sold separately

unless otherwise indicated.

Connection with a television

Back of the main unit

To RF OUT

Television

To OUT

Television

To OUT

To RF OUT

To RF IN

Video cable

(Included) 75 coaxial cable

(Included)

Cable from wall or antenna signal If your television does not

have a VIDEO IN terminal

(page 8 a ).

If you enjoy higher picture

quality (page 8).

75 coaxial

cable

If your television does not

have a VIDEO IN terminal

(page 8 b ).

If you enjoy higher picture

quality (page 8).

Cable from wall or antenna signal

75 coaxial

cable

To RF IN

75 coaxial cable

Video cable

(Included)

Video cassette recorder

To IN1

75 coaxial cable

(Included) Audio/Video cable

The connection will allow the video cassette recorder to be used for playback and recording when this unit is turned off.

Back of the main unit

Included parts to be used

Video connections

75 coaxial

cable

Video cable Main unit

RQT8656-P.indd6RQT8656-P.indd6 2006/02/2816:52:102006/02/2816:52:10

Red White Yellow

Red

White

Yellow

VIDEO

VHF/UHF

RF IN

VHF/UHF

RF IN

VIDEO OUT

VHF/UHF

RF OUT

#7&+1.

#7&+14

176

Satellite Cable

VIDEO S-VIDEO

+0 176

#7&+1

Red White Yellow

VIDEO

VHF/UHF

RF IN

Satellite Cable

VIDEO S-VIDEO

+0 176

#7&+1

Red White Yellow

CConnection with a television and cable box or satellite receiver

DConnection with a television, video cassette recorder and cable box or satellite receiver

You need to subscribe to a cable TV service to enjoy viewing their programming.

Consult your service provider regarding appropriate cable TV box or satellite receiver.

Cable from wall or antenna signal

Video cable

(Included)

75 coaxial

cable

75 coaxial cable

(Included)

Satellite antenna

(Satellite receiver only)

75 coaxial cable

Audio/Video cable

Cable from wall or antenna signal

75 coaxial

cable

75 coaxial cable

You need to subscribe to a cable TV service to enjoy viewing their programming.

Consult your service provider regarding appropriate cable TV box or satellite receiver.

The connection will allow the video cassette recorder to be used for playback and recording when this unit is turned off.

Audio/Video cable

75 coaxial cable (Included)

75 coaxial cable

Video cable

(Included)

75 coaxial cable

If your television does not

have a VIDEO IN terminal

(page 8 c).

If you enjoy higher picture

quality (page 8).

If your television does not

have a VIDEO IN terminal

(page 8 d ).

If you enjoy higher picture

quality (page 8).

Cable box or Satellite receiver

Video cassette recorder Cable box or Satellite receiver

Satellite antenna

(Satellite receiver only)

Television

To OUT

To IN1To RF OUT

To RF IN

Main unit’s front panel

To RF

OUT

To RF IN To OUT

To IN1

Audio/Video

cable

Back of the main unit

Back of the

main unit

Television

To IN2

75 coaxial cable

RQT8656-P.indd7RQT8656-P.indd7 2006/02/2816:52:102006/02/2816:52:10

#7&+1

VIDEO S-VIDEO

+0 176

VHF/UHF

RF IN

#7&+1

VIDEO S-VIDEO

+0 176

VHF/UHF

RF IN

VHF/UHF

RF OUT

VHF/UHF

RF IN

#7&+1

VIDEO S-VIDEO

+0 176

VHF/UHF

RF IN

VIDEO S-VIDEO

176

#7&+1

S VIDEO

COMPONENT

VIDEO IN

If your television does not have a VIDEO IN terminal, RF Modulator is necessary

Connection with a

television

(page 6 A )

Connection with a

television and video

cassette recorder

(page 6 B )

Connection with

a television and

cable box or

satellite receiver

(page 7 C )

To enjoy higher picture quality

Connecting to the S VIDEO IN terminal Connecting to the COMPONENT VIDEO IN terminal

Video cable (Included)

RF Modulator

Television

75 coaxial cable (Included) 75 coaxial cable

75 coaxial cable

The S VIDEO OUT terminal achieves a more vivid picture

than the VIDEO OUT terminal. (Actual results depend on the

television.)

S Video cable Component Video cable

These terminals can be used for either interlace or progressive

output (Operations Guide page 21) and provide a purer

picture than the S VIDEOOUT terminal.

Connect to terminals of the same color.

Video cassette recorder

Television

Back of the main unit

Cable box or Satellite receiver

Back of the main unit Back of the main unit

Connection with

a television,

video cassette

recorder and

cable box or

satellite receiver

(page 7 D )

Instead of connecting with the VIDEO IN terminal, connect with one of the following methods.

Video connections

Do the following connection instead of connection “A”–“D”. Also connect all other cables as well.

RQT8656-P.indd8RQT8656-P.indd8 2006/02/2816:52:112006/02/2816:52:11

Type Main unit Other equipment (television etc.)

A twin lead

A twin lead and a

coaxial plug

Two twin leads

If the antenna connector doesn’t match

(Flat) Twin lead

300 cable

from the antenna

300–75 

transformer

To main unit’s RF

IN terminal

(Flat) Twin lead

300 cable

VHF/UHF band

mixer

To main unit’s

RF IN terminal

(Round)

75 coaxial cable

(Flat) Twin lead

300 cable

from the antenna

300–75 

transformer

75–300 

transformer

75 coaxial

cable

VHF or UHF

VHF/UHF band

separator

75 coaxial

cable

VHF

UHF

from the antenna

UHF

VHF

VHF/UHF band

separator

75 coaxial

cable

VHF/UHF

band mixer

Use one of the following connections to suit the antenna lead to the unit’s RF IN terminal, and the 75 coaxial cable to the antenna terminals on the

equipment (television etc.). Refer to other equipment’s operating instructions.

To main unit’s

RF IN terminal

Television

RQT8656-P.indd9RQT8656-P.indd9 2006/02/2816:52:112006/02/2816:52:11





Video connections

Connecting to a TV with an HDMI (High Deﬁnition Multimedia Interface) terminal

HDMI is the next-generation interface for digital devices. When connected to an HDMI compatible unit, an uncompressed digital audio and video

signal is transmitted.You can enjoy high quality, digital video and audio with just one cord. When connecting to an HDMI-compatible HDTV (High

Deﬁnition Television), the output can be switched to 1080i or 720p HD video.



When using this connection, it is not necessary to connect with the Video cable, S video cable or Component video cable shown on pages 6–8.



For units compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection that are equipped with a digital DVI input

terminal (PC monitors, etc.):

Depending on the unit, images may not display properly or at all when connecting with a DVI/HDMI switching cable. (Audio cannot be output.)



Please use an HDMI cable that has the HDMI logo (as shown on the cover ).



Do not connect any kind of audio/video distribution devices between the main unit and the TV (such as an ampliﬁer, etc.).

HDMI cable (not included)

To HDMI IN

To HDMI AV OUT

Television

Back of the main unit

Set the following (Operations Guide page 39):

From the setup menu, “HDMI Video Output” : [On]

From the setup menu, “HDMI Audio Output” : [Off]

What is HDAVI Control?

HDAVI Control is a convenient function that offers linked operations of this unit and a Panasonic TV (VIERA) under HDAVI Control.

You can use this function by connecting the equipment with the HDMI cable. See the operating instructions for connected equipment for

operational details.

For information about using the HDAVI Control function, please see page 9 of the “Operations Guide”.

Control with HDMI (HDAVI Control)

RQT8656-P.indd10RQT8656-P.indd10 2006/02/2816:52:112006/02/2816:52:11

Andere Handbücher für SCRT50 - HOME THEATER

Inhaltsverzeichnis

Andere Panasonic Heimkinosystem Handbücher

Panasonic

Panasonic SC-HTB580 Bedienungsanleitung

Panasonic

Panasonic SC-PTX7 Bedienungsanleitung

Panasonic

Panasonic SC-ZT1 - Wireless Speaker System Bedienungsanleitung

Panasonic

Panasonic SC-BT100P-K Bedienungsanleitung

Panasonic

Panasonic SCHTB500 - HOME THEATER AUDIO SYSTEM Bedienungsanleitung

Panasonic

Panasonic SCPT750 - DVD HOME THEATER SOUND SYSTEM Bedienungsanleitung

Panasonic

Panasonic SCBTT350 - 3D BLU-RAY HOME THEATRE Bedienungsanleitung

Panasonic

Panasonic SAHT730 - DVD THEATER RECEIVER Kurzanleitung

Panasonic

Panasonic SC-XH70 Bedienungsanleitung

Panasonic

Panasonic SCHT440 - RECEIVER Bedienungsanleitung

Panasonic

Panasonic SC-PT170 Bedienungsanleitung

Panasonic

Panasonic SC-XH70 Bedienungsanleitung

Panasonic

Panasonic SCBT300 - BLU-RAY DISC HOME THEATER SOUND... Bedienungsanleitung

Panasonic

Panasonic SA-HT440PL Bedienungsanleitung

Panasonic

Panasonic SA-PT550E Bedienungsanleitung

Panasonic

Panasonic SC-PT760 Bedienungsanleitung

Panasonic

Panasonic SC-PT450 Bedienungsanleitung

Panasonic

Panasonic SC-RT30 Bedienungsanleitung

Panasonic

Panasonic SC-BT735 Bedienungsanleitung

Panasonic

Panasonic SC-HT1000 Bedienungsanleitung

Panasonic

Panasonic SA-HT800VP Bedienungsanleitung

Panasonic

Panasonic SC-XH185 Bedienungsanleitung

Panasonic

Panasonic SA-HT545GN Bedienungsanleitung

Panasonic

Panasonic SC-BTT273 Bedienungsanleitung

Beliebte Heimkinosystem Handbücher anderer Marken

Samsung

Samsung HT-ES4200K Bedienungsanleitung

Harman Kardon

Harman Kardon HS 100 Bedienungsanleitung

Samsung

Samsung HT-P10 Bedienungsanleitung

Philips

Philips HTS5131 Betriebsanleitung

Goodmans

Goodmans GDVD19SWS Bedienungsanleitung

Moxi

Moxi media center Bedienungsanleitung

Samsung

Samsung HT-EM35 Bedienungsanleitung

LG HE903PAW Bedienungsanleitung

Bose

Bose SoundTouch 520 Bedienungsanleitung

Sony

Sony BDV-N990W Bedienungsanleitung

Manta

Manta GK-500 Bedienungsanleitung

Sharp

Sharp SBW800 Bedienungsanleitung

Philips

Philips HTS3541 Bedienungsanleitung

LG LHT799 Bedienungsanleitung

Samsung

Samsung HT-TWZ415 Bedienungsanleitung

Loewe

Loewe REFERENCE 52 SL FHD+ 200 NMP Bedienungsanleitung

Samsung

Samsung AH68-02166R Bedienungsanleitung

RCA

RCA 600-Watt Bedienungsanleitung