Panasonic VF2H Series Gebrauchsanweisung

Construction Manual

Video Wall

●Unpacking 3

●Installation

Cautions when installing or moving

Wall-mounting bracket

Installation of mounting bracket 7

Cautions of Video Wall installation 9

Embedding condition 13

Connection to power source 17

Daisy Chain Connection

Remote controller IR signal outreach distance

●Picture adjustment

Color Calibration 25

●Maintenance

Maintenance 26

Contents

１

２

３

４

Unpacking Procedure

Unpacking

Joint （front and back/Each 2 points）Accessory parts

Remove Joint(Total ４)

Take out accessory parts and cushions

Remove upper carton case and front cushions

Remove a protection bag

Front Side

Cautions 1

・Please do not move with the monitor as an upswing or a downswing.

Cautions 2

・Grab the handles when working.

・Do not take hold any part except the handles.

・Do not touch top/down/left/right side and

also surface of the monitor.

・Do not stand on the floor directly

with surface or rear side of the

monitor.

・Do not make impacts to the monitor.

Do not twist the monitor.

Handle

：No Good

：OK

Wall-mounting bracket

When preparing bracket for multiple monitors, please take the following considerations.

1) Ensure the wall on which the monitors will be installed has a smooth surface.

2) Ensure the bracket used to attach the monitors to the wall have enough load

capacity to support them.

3) Ensure the bracket used can be adjusted upward, downward, to the left and right,

forward and backward.

4) When installing or moving, ensure the bracket does not interfere with the back of

the monitor, cable guides, and other structures.

5) Ensure the bracket is constructed so that the monitor can easily be removed.

6) Please do not distort the monitor.

If you can not install in the same way as this manual,

please contact Panasonic sales company.

Caution

Wall-mounting bracket

Installation of mounting bracket 1

There are L type protection board (downside) and protection film (monitor surface).

Please remove them.

-16mm longer than the thickness of the

mounting bracket) and tighten them

securely.

There is a limitation of maximum units using optional mounting bracket, when we install video walls.

・TH-55VF2H/VF2 : 4row/5column

・TH-55VF1H : 5row/6column

・TH-55LFV9/LFV8 : 9row/11column

Column

Row

Installation of mounting bracket 2

Please set a position dial (up, down, left and right) of the starting bracket to eccentric position of

installation direction side, not a center (default) position.

for example

Cautions 1

Cautions of Video Wall installation 1

When we press 70 N power to left

and Right, the wall mount will

move to back

※In case of using TY-VK55LFV1

and TY-VK55LFV2

Please do not press panel active area and corner.

Please press center edge of right and left.

Please press vertically to the panel.

Please increase power in right and left equality.

There is a possibility that if pressure

is added on the bezel towards outside,

the bezel will be distorted.

（The bezel will be open by 20N pressure)

Please add a soft pressure vertically to

the panel.

０．５ｍｍ

About securing space between monitors

Cautions 2

Cautions of Video Wall installation 2

Please do not distort the monitor.

After turning on, the monitor slightly expands due to heat.

When installing multiple monitors with fixed outer most

peripheries, space (0.5 mm) between monitors (above, below,

to the left and right sides of each monitor) must be secured to

account for expansion due to heat.

Space between sets (same for above,

below, to the left and right directions)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Industriemonitor Handbücher

Panasonic

Panasonic PFM-KCU11 Bedienungsanleitung

Beliebte Industriemonitor Handbücher anderer Marken

JUMO

JUMO mTRON T Bedienungsanleitung

SWEDX

SWEDX SWSS156 Bedienungsanleitung

Saia

Saia PCD7.D410VTCF Bedienungsanleitung

weintek

weintek EasyView MT-608S Bedienungsanleitung

Advantech

Advantech FPM-212 Series Bedienungsanleitung

Advantech

Advantech FPM-3191G Series Bedienungsanleitung

Austin Hughes

Austin Hughes RP-F821 Bedienungsanleitung

WAGO

WAGO WAGO-PERSPECTO 762 Series Produkthandbuch

HIS

HIS HIS-ML12-Series D Bedienungsanleitung

Advantech

Advantech IDS-3319 Series Bedienungsanleitung

Acnodes

Acnodes APH 8064 Bedienungsanleitung

Acnodes

Acnodes APW 5400 Bedienungsanleitung

Dynamic Displays

Dynamic Displays QES1500 Progressive Series Bedienungsanleitung

AXIOMTEK

AXIOMTEK Dk3g4PANEL 6153-O/P Bedienungsanleitung

ESA

ESA XM7W7 Bedienungsanleitung

Siemens

Siemens SIMATIC Industrial Flat Panel IFP2200 Bedienungsanleitung

Siemens

Siemens INOX PRO SIMATIC IFP1900 Administratorhandbuch

Advantech

Advantech IDK-1115WP-45FHA1 Bedienungsanleitung