Panasonic Panaboard UB-5315 Bedienungsanleitung

Electronic Board

Operating Instructions

Model No. UB-5315

UB-5815

The unit in this picture is UB-5315 series.

(Stand kit is optional.)

English. . . . . . . . . . . . . . . . . .1–36

Français . . . . . . . . . . . . . . . .37–72

Deutsch . . . . . . . . . . . . . . .73–108

Español . . . . . . . . . . . . . .109–144

Italiano . . . . . . . . . . . . . . .145–180

Nederlands . . . . . . . . . . .181–216

Svenska . . . . . . . . . . . . . .217–252

中文 . . . . . . . . . . . . . . . .253–288

Русский . . . . . . . . . . . . . .289–324

[Stand (option)] [Wall-mounting]

English Français ItalianoEspañol Nederlands SvenskaDeutsch 中文 Русский

• To assemble this unit, please refer to the Installation Manual.

• Before operating this unit, please read these instructions completely and keep them carefully for future reference.

• Because of the nature of the print film, all the printed text will remain on the film.

Thank you for purchasing the Panasonic Electronic Board.

For optimum performance and safety, please read these instructions carefully.

Model number: _________________________ Date of purchase: ________________________

Serial number: _________________________ Dealer’s name: __________________________

Dealer’s address: ______________________________________________________________________

Record these items for future reference

Tel:

Q’ty

• Thermal transfer film . . . . . . . . . . . . . . 1

• Markers (red, black, and blue) . . . . . . 1 each

• Operating Instructions . . . . . . . . . . . . . 1

• Installation Manual . . . . . . . . . . . . . . . 1

• Eraser . . . . . . . . . . . . . . . . . . . . . . 1

Q’ty

• Power cord . . . . . . . . . . . . . . . . . . . 1

• A4 (Letter*) size copy paper . . . . . . . . . 20

• Software CD-ROM . . . . . . . . . . . . . . . 1

• Software License Agreement . . . . . . . . . . 1

Accessories

* Letter size is for U.S.A. and Canada models.

* The stand is optional. By way of example, this manual describes an Electronic Board which is used with the stand.

* USB cable is not included.

• Microsoft, Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in

the United States and/or other countries.

Windows®is Microsoft®Windows®operating system.

Screen shots reprinted with permission from Microsoft Corporation.

• IBM is a registered trademark of International Business Machines Corporation.

• Pentium is a registered trademark of Intel Corporation in the U.S. and other countries.

• Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.

• All trademarks referred to in this manual are property of their respective companies.

The information given in this Operating Instructions is subject to change without notice.

Warning about saving data

When the system storage device or any of its optional storage device is adversely effected by operational

errors, static electricity, electrical noise, vibration, dust or when the power has been cut off due to malfunction,

repair or inadvertently, the memory contents may be lost or changed. Before operating the system, make a

point of reading the precautionary notes in the Operating Instructions and the help information, and observe

them during operation.

Please observe carefully the following precaution:

• Make absolutely sure that all important data is saved by back-up or the original is saved.

The manufacturer hereby declares that it cannot be held accountable for any loss or change in any data

stored on floppy disks, hard disks, optical disks, or other memory devices.

English

For Your Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

• CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Part Names and Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

• Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing the Thermal Transfer Film . . . . . . . . . . . . . . . . . . . . . . 10

Loading Copy Paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Making Copies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

• Copy types and procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Replacing the Thermal Transfer Film . . . . . . . . . . . . . . . . . . . . . 16

Paper Jams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Screen Height Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Computer Interfacing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

• System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

• Contents of CD-ROM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

• Connecting the unit to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

• Installing the driver and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

• Removing the driver and software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

• Scanning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

• Panaboard Operation Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

• Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Daily Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

• Cleaning the screen and the unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

• Caring for the eraser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

• Cleaning the printer head, platen roller and pick-up roller . . . . . . . . . . . . . . . 32

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

• Meanings of error codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

• Option and Separately available . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Page

Table of Contents

Before

You Start

Using

Help

For Your Safety

• (220–240 V equipment)

A certified power supply cord has to be used with this

equipment. The relevant national installation and/or

equipment regulations shall be considered. A certified

power supply cord is not lighter than ordinary polyvinyl

chloride flexible cord according to IEC 60227

(designation H05VV-F 3G 1.0 mm2).

English

CAUTION:

TO PREVENT RISK OF ELECTRIC SHOCK

HAZARD, DO NOT REMOVE THE COVER OF THIS

PRODUCT, REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT

EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE

OF MOISTURE.

THE SOCKET-OUTLET MUST BE NEAR THIS

EQUIPMENT AND MUST BE EASILY ACCESSIBLE.

The product should be used only with the power cord

that is supplied by the manufacturer.

CLASS 1 LED PRODUCT

Safety Information

This appliance is supplied with a moulded three pin

mains plug for your safety and convenience.

A 5 amp. fuse is fitted in this plug. Should the fuse need

to be replaced please ensure that the replacement fuse

has a rating of 5 amps. and that it is approved by ASTA

or BSI to BS1362. Check for the ASTA mark or the

BSI mark on the body of the fuse. If the plug

contains a removable fuse cover you must ensure that it

is refitted when the fuse is replaced. If you lose the fuse

cover the plug must not be used until a replacement

cover is obtained. A replacement fuse cover can be

purchased from your local Panasonic Dealer.

If the fitted moulded plug is unsuitable for the socket

outlet in your home then the fuse should be removed

and the plug cut off and disposed of safely.

There is a danger of severe electrical shock if the cut off

plug is inserted into any 13 amp. socket.

If a new plug is to be fitted please observe the wiring

code as shown below. If in any doubt please consult a

qualified electrician.

WARNING: This appliance must be earthed.

IMPORTANT: The wires in this mains lead are coloured

in accordance with the following code.

Green-and-Yellow: Earth

Blue: Neutral

Brown: Live

As the colours of the wire in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug, proceed

as follows.

The wire which is coloured Green-and-Yellow must be

connected to the terminal in the plug which is marked

with the letter E or by the Earth symbol or coloured

Green or Green-and-Yellow.

The wire which is coloured Blue must be connected to

the terminal in the plug which is marked with the letter N

or coloured Black.

The wire which is coloured Brown must be connected to

the terminal in the plug which is marked with the letter L

or coloured Red.

For users in

the United Kingdom only

Für Benutzer in der BRD

Hinweis:

Der arbeitsplatzbezogene Geräuschemissionswert dieses

Gerätes beträgt 70 dB(A) nach DIN 45635 Teil 19.

How to replace the fuse:

Open the fuse compartment

with a screwdriver and

replace the fuse.

English

Locking the casters

(Push this side)

Push to lock

Precautions

Never remove the cover, take apart or modify the

product. This will void the warranty.

Do not position the electronic board in a location where

it is unstable.

Do not put drinks, other liquids or heavy items on the

tray or screen.

After installing or moving the electronic board, lock the

casters and set the fall-prevention extension legs.

Do not use the electronic board in an excessively

humid or dusty location.

If the electronic board is not going to be used for an

extended period of time (e.g., during extended

holidays), turn off the power and remove the plug from

the wall outlet.

Precautions

■CD-ROM

To prevent the CD-ROMs from accidental damages:

Do not lean against the screen or on the cover (lower),

even if the electronic board is mounted on the wall.

The screen height must be adjusted by two people.

Confirm both sides of the screen are hung in the same

height slots.

Make sure to tighten the height adjustment handles

after adjusting the screen height.

Do not touch or write on the surface

of the disc.

Do not leave the disc out of the

protective case.

Do not leave the disc in direct

sunlight or near heat sources.

Do not place heavy objects on the

disc case or drop the case.

To clean the disc, hold the disc by

its edges and wipe it from the

center to the edges with a dry, soft

cloth.

Slot 1

Slot 3

Slot 2

Slot 1

Slot 3

Slot 2

Tighten

the height

adjustment

handles

Tighten

the height

adjustment

handles

Precautions

English

Installation • Do not install the unit where it may be exposed to direct sunlight, near heating

equipment, or near air-conditioning vents as this may cause stretching and/or

discoloration of the screen.

• Do not install the unit in strong sunlight or strong lighting. Proper copying may

become impossible.

• Do not install the unit in locations where the temperature may change suddenly as

this may disable the unit’s ability to make copies.

Screen Film • Make thick and dark lines inside the copying

area. Note that any writing inside the shaded

area (on right) cannot be copied.

• Do not allow writing to remain on the screen for

an extended period of time as it will become

harder to erase.

• Do not touch the screen, write with markers, or

erase while the screen is moving as this may result in damage to the unit.

Markers,

Erasers and

Thermal

Transfer Film

• Use only the included or designated markers, erasers and thermal transfer film.

(See page 36.)

Use of accessories other than those included or designated (such as oil-based

markers) may damage the screen or result in hard-to-erase markings.

• Do not store the thermal transfer film in a location subject to extreme changes in

temperature (such as near air conditioning or heating equipment) as this may cause

condensation on the thermal transfer film and result in poor print quality and/or

paper jams.

• The length of one roll of designated thermal transfer film (Replacement film: UG-

6001) is approximately 50 meters. One roll of thermal transfer film can make

approximately 150 sheets of copies.

Note that the total number of copies may differ depending on the operating conditions.

Also note that the length of the thermal transfer film supplied with the unit is shorter

than the replacement film roll and is only approximately 10 meters.

• Store markers horizontally as vertical storage may stop the ink from coming out.

Power Cord • When moving the unit, disconnect the power cord from the electrical power socket

and from the printer’s power connector and coil it for transportation as stepping on

the power cord or having it catch on something during movement may result in

damage to the cord.

Replacing

the Thermal

Transfer Film

• Dispose of the used thermal transfer film in a trash receptacle for burnable trash.

• A negative of the copied image will remain on the thermal transfer film. (To protect

the security of your information, we recommend cutting up the used thermal transfer

film with scissors or shredder before disposing of it.)

USB Cable • Use a shielded USB cable that is certified as logo by USB-IF.

• If you connect the electronic board to a USB hub, it is not guaranteed to work.

Copying area

0 mm 12.5 mm

25 mm

Part Names and Functions

OFF

Screen Film

AC Inlet

Power Switch

Tray

Power Cord

Output Port

This port holds up to 10

sheets of output paper.

Paper Cover

Open this cover to

load copy paper.

Printer Door

Open this door to load a

thermal transfer film or to

remove jammed paper.

(See pages 10, 17.)

Printer Open Lever

Push down this lever to

open the printer door.

Control Panel

(See page 9 for details.)

USB Connector

(See page 22.)

Stand

The stand is optional.

Cord Holder

Scanner

Part Names and Functions

English

■Control panel

Panel Name Description

Contrast/

Remaining

Film

Indicator

This lamp indicator notifies the user when the time to replace the

thermal transfer film is approaching (estimated) and of the

printing contrast used during copying.

Indicator off: Normal printing contrast

Indicator on: Darker than normal printing contrast

Indicator flashing*: Almost time to replace the thermal transfer

film

(Note that only about 15 more sheets may be

copied when this indicator starts flashing.)

Replacement film (UG-6001) is separately available

from the dealer where you purchased your unit.

* The flashing indicator will go out after the power is turned off and the

printer has been opened and closed. (When copying is performed, this

indicator will begin flashing again.)

Contrast

Key

Each time this key is pressed, the unit will alternate between

normal and dark contrast modes (Normal/Dark).

2-Screen

Copy Key

This key causes the front and back of the screen to be copied on

a single sheet of paper.

Multi-Copy/

Error

Indicator

This indicator displays the number of copies to be made. The

display changes each time the Multi-Copy/Stop Key is pressed.

Example: 1 →2 → ··· →9 →1 → ···

When an error occurred, a flashing symbol will appear in this display to

indicate the error status. (See page 35.)

Multi-Copy/

Stop Key

When making multiple copies, press this key until the desired

number of copies is displayed on the Multi-Copy/Error Indicator.

This key can also be pressed while multiple copies are being

made to stop the copying process. The display indication

changes while multiple copies are being made as shown below.

After reaching 0, the display will reset to 1.

Example: 5 →4 →3 →2 →1 →0 →1

(countdown display during copying)

Copy Key This key causes the screen to be copied.

Advance

Key This key advances the screen from right to left.

Contrast/Remaining Film

Indicator

Advance Key

Multi-Copy/Error Indicator

Multi-Copy/Stop Key

Copy Key

Contrast Key

2-Screen Copy Key

Installing the Thermal Transfer Film

Install the thermal transfer film in the printer.

1Set the power switch to on ( I).

• “ ” will flash on the Multi-Copy/Error Indicator when

the thermal transfer film has run out.

2Push down the printer open lever and open the

printer door.

3Install the thermal transfer film.

1) Set the thermal transfer film, with the blue gear

in front, on the right.

2) Insert the blue shaft into the front left hole.

OFF

Printer door

Blue gear

Blue shaft

Andere Handbücher für Panaboard UB-5315

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Interaktives Whiteboard Handbücher

Panasonic

Panasonic UB-5838C Bedienungsanleitung

Panasonic

Panasonic ELITE PANABOARD UB-T780 Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-8325 Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-7325 Bedienungsanleitung

Panasonic

Panasonic UB-5325 Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-7325 Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Panasonic

Panasonic ElitePANABOARD UB-T880W Bedienungsanleitung

Panasonic

Panasonic Panaboard KX-BP535A Bedienungsanleitung

Panasonic

Panasonic UBT780C Bedienungsanleitung

Panasonic

Panasonic USB-7325 Bedienungsanleitung

Panasonic

Panasonic Panaboard KX-BP535 Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-5310 Bedienungsanleitung

Panasonic

Panasonic KX-B730A Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-7320 Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-5315 Bedienungsanleitung

Panasonic

Panasonic ElitePANABOARD UB-T880W Bedienungsanleitung

Panasonic

Panasonic ElitePANABOARD UB-T880W Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-5310 Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-5310 Bedienungsanleitung

Panasonic

Panasonic ELITE PANABOARD UB-T780 null

Panasonic

Panasonic UB-T761 Bedienungsanleitung

Panasonic

Panasonic ElitePANABOARD UB-T880W Bedienungsanleitung

Panasonic

Panasonic Panaboard UB-5815 Bedienungsanleitung

Beliebte Interaktives Whiteboard Handbücher anderer Marken

SMART

SMART KAPP42 Bedienungsanleitung

Buhl

Buhl LyteBoard Bedienungsanleitung

SMART Board

SMART Board 680 Bedienungsanleitung

SMART

SMART SBX880 Bedienungsanleitung

Legamaster

Legamaster e-SCREEN ETX Bedienungsanleitung

SMART Board

SMART Board SBM685ix2 Bedienungsanleitung

Seneca

Seneca eno Bedienungsanleitung

BenQ

BenQ RP840G Bedienungsanleitung

SMART

SMART Sympodium IC-150 Bedienungsanleitung

Olivetti

Olivetti OLIBOARD Bedienungsanleitung

Turning Technologies

Turning Technologies MOBIVIEW Bedienungsanleitung

Dukane

Dukane ITP84 Bedienungsanleitung

Bretford

Bretford EDUIMS Konfigurationshandbuch

Plus

Plus M-11S Bedienungsanleitung

TRIUMPH BOARD

TRIUMPH BOARD ULTRA SLIM Bedienungsanleitung

Returnstar Interactive Tech

Returnstar Interactive Tech IQBoard DVT V7.0 Bedienungsanleitung

AVer

AVer CP series Bedienungsanleitung

Genee

Genee 56" Bedienungsanleitung