Panasonic SiriusXM CQ-RXBT490U Bedienungsanleitung

CQ-RXBT490U

English

General

Power On/Off

Set your car’s ignition switch to the ACC or ON posi-

tion.

Power on: Press [SOURCE] (PWR).

Power off: Hold down [SOURCE] (PWR) for more

than 1 second.

Source Selection

Press [SOURCE] to change the source.

Radio (apage 15)

Disc player

(apage 16)

USB (apage 19)

AUX

The sound of connected audio device is output from

car speakers. d

Bluetooth®

(apage 26)

SiriusXM

(apage 36)

When the optional SiriusXM Connect Vehicle Tuner is

connected to this unit.

(Return to “RADIO”)

Volume Adjustment

(Setting Range: 0 to 40, Default: 18)

Turn [VOL] clockwise to increase the volume,

and counterclockwise to decrease the volume.

Volume level (0 to 40)

(default: 18)

AUX Connector (3.5 mm ø stereo)

From line output of external sound/audio device

(ex. Silicon audio player, HDD player, etc.)

Caution

Set the volume level to low enough before the AUX connection is completed.

Failure to observe this may generate loud noise and accordingly damage your speakers and your hear-

ing.

[SOURCE]

selects a source.

[PWR] (Power)

toggles power on/off.

Remote Control Sensor

[MENU]

selects items in the

other menu.

[VOL] (Volume)

12 CQ-RXBT490U

English

General (continued)

aPage 10

aPage 12

aPage 40

aPage 31

aPage 30

aPage 27

aPage 32

aPage 38

aPage 39

Press [MENU].

Turn [VOL] clockwise

or counterclockwise.

Press [VOL] (PUSH SEL).

Note: This “PHONE”

mode is selectable

only when switch to

Bluetooth®mode.

Note: This history mode is selectable

only when a device is paired and

connected to this unit.

Turn [VOL] clockwise

or counterclockwise.

Press [ ] (Return).

Note: This “SXM”

mode is selectable

only when switch to

SiriusXM mode.

Menu Operation

Display Color Selection

1Press [MENU].

2Press [VOL] (PUSH SEL), and turn [VOL]

clockwise or counterclockwise to select

“LIGHT SET”.

Display color selection

3Press [VOL] (PUSH SEL), and turn [VOL]

clockwise or counterclockwise to select

display color.

OCEAN (aqua blue)

Variety: OCEAN (aqua blue), SKY (sky blue), FOREST

(green), ORANGE (amber), FIRE (red), PINK

(deep pink), ROSE (pink), STORM (7 colors)

Default: SKY (sky blue)

STORM (7 colors)

Note: Once rotary operation is made, the setting is

activated.

CQ-RXBT490U

English

Audio Settings

[DISP] (Display)

exits from the audio menu.

[VOL]

selects a value in the audio

menu.

(PUSH SEL: Select)

selects items in the audio

menu.

[{] [}]

adjust the sound level in

the SQ setting mode.

Preset buttons [1] through [6]

select a SQ setting in the SQ selection mode or preset the current SQ adjustment in the

SQ adjustment mode (by holding down one of the buttons for more than 2 seconds).

1Press [VOL] (PUSH SEL) to open the audio menu.

Note: If no operation takes place for more than 5 seconds in audio setting, the display returns to the regular mode.

2Turn [VOL] clockwise or counterclockwise to select

a mode, and the press [VOL] to be adjusted. 3Turn [VOL] clockwise (q) or counter-

clockwise (w) to adjust.

Volume

(Setting Range: 0 to 40, Default: 18) q/ w: Adjustment

Bass

(Setting Range: −12 dB to +12 dB by 2 dB, Default: 0 dB) q/ w: Adjustment

Treble

(Setting Range: −12 dB to +12 dB by 2 dB, Default: 0 dB) q/ w: Adjustment

SQ Adjustment

(Tone/SQ adjustable range : –12 dB to +12 dB (by 2 dB))

Setting range:

SQ Low/Bass: ±12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)

SQ Mid: ±12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)

SQ High/Treble: ±12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)

Band

Frequency

Level

qAdjust each band.

q/ w: center frequency up/down

[BAND] : Band selection

[{] [}]: Level down/up

wHold down the numeric button [2] through

[6] for more than 2 seconds, and the setting

value is written into the desired SQ.

Note:

Only SQ presetting value cannot be saved

in [1] button.

Balance

(Setting Range: 15 levels each, Default: CNT (center)) q/ w: Adjustment

[SQ] (Sound Quality)

[BAND]

selects a band in the SQ setting mode.

14 CQ-RXBT490U

English

Audio Setting (continued)

SQ Selection

You have 6 preset modes (FLAT, ROCK, POP, VOCAL,

JAZZ, CLUB). You can customize your settings for

these (except FLAT) and save them for instant recall.

Press [SQ] to select the sound type as follows.

FLAT

ROCK

POP

VOCAL

JAZZ

CLUB

(Return to “FLAT”)

Notes:

¡After pressing [SQ] on the main unit, you can also

select a sound type by pressing the preset buttons

[1] to [6].

¡To return an adjusted SQ to the default setting,

select the SQ which to be returned to the default

setting, then hold down [BAND] for mote than 2

seconds.

Fader

(Setting Range: 15 levels each, Default: CNT (centre)) q/ w: Adjustment

Subwoofer Setting

(Selectable setting: SET ON/SET OFF, default: OFF) q/ w: Selection

The PRE-OUT(REAR) can be used as a substitutional subwoofer when a subwoofer is not connected.

Subwoofer Frequency Adjust-

ment

(Setting range: 55 Hz, 85 Hz, 120 Hz, 160 Hz), Default: 120 Hz. q/ w: Adjustment

Note: This function is selectable when above “Subwoofer Setting” is set to ON.

Subwoofer Gain Adjustment

(Setting range: 0 dB to +6 dB by 2 dB, Default: 0 dB) q/ w: Adjustment

Notes:

¡This function is selectable when above “Subwoofer Setting” is set to ON.

¡The gain setting is effective when volume level is below 25. (when volume level from 26 to 40, the gain set-

ting is ineffective.)

Notes:

¡The volume can also be adjusted directly using [VOL] on the main unit. (apage 11)

¡Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.

¡If the fader is set to front, the pre-amp. output (rear) is decreased.

Flat frequency response: does not empha-

size any part. (Default)

Speedy and heavy sound:

exaggerates bass and treble.

Wide-ranged and deep sound:

slightly emphasizes bass and treble.

Clear sound:

emphasizes middle tone and slightly empha-

sizes treble.

Jazz-speciﬁc deep sound:

sound with emphasis on sharpness of high

hat and echo saxophone

Club and disco-speciﬁc sound:

reproduction of realism being in a club.

CQ-RXBT490U

English

Radio (AM/FM)

Operation Flow

1Press [SOURCE] to select the radio source.

2Press [BAND] to select a band.

3Select a station.

Frequency Adjustment

[6]: Lower / [7]: Higher

Note: For station search, hold down either of the but-

tons for more than 0.5 seconds and release it.

Preset Station Selection

Press the corresponding preset button from [1]

through [6] to tune in a preset station.

Radio Source Display

Band Frequency Preset Number

lights while receiving an FM stereo signal.

Display Change

Press [DISP] to change the display.

Radio mode display

(Frequency)

Clock display S

Station Preset

Up to 6 stations can be preset in each of AM, FM1,

FM2, and FM3.

Preset stations can be simply called up by pressing [1]

through [6].

Auto Preset Memory (APM)

With this operation, stations with good receiving

conditions can be automatically stored in the preset

memory.

1Select a band.

2Hold down [BAND] (APM) for more than 2

seconds.

The preset stations under best receiving conditions

are received for 5 seconds each after presetting the

stations (SCAN). To stop scanning, press one of the

buttons from [1] through [6].

Note: New stations overwrite existing saved stations.

Manual Station Preset

1Tune into a station.

2Hold down one of the preset buttons from [1]

through [6] for more than 2 seconds.

(blinks once)

Note: New stations overwrite existing saved stations.

Caution

To ensure safety, never attempt

to preset stations while you are

driving.

[SOURCE]

selects a source.

[DISP] (Display)

switches the information

on the display.

[BAND]

selects a band in the radio source.

(APM) (Auto Preset Memory)

executes APM in the radio source

(by holding it down for more than 2

seconds).

[6] [7]

decreases/increases the frequency. (For seek tuning, hold it

down for more than 0.5 seconds and release it.)

Preset buttons [1] through [6]

select a preset station in the radio source,

preset the current station (by holding it down

for more than 2 seconds).

16 CQ-RXBT490U

English

Disc Player

Operation Flow

When a disc is already loaded, press [SOURCE]

to select the Disc player mode.

1Press [OPEN] to open the face plate.

2Load a disc with the printed side facing up.

Printed side up

[u](Eject)

3Close the face plate manually.

Notes:

¡The unit recognizes the disc and starts playing

automatically.

¡The power will be turned on automatically when a

disc is loaded.

Disc Eject

1. Press [OPEN].

2. Press [u]and take the disc out.

3. Close the face plate manually.

4Select a desired portion.

Track/File Selection

Press [6]/ [7].

Note: To perform fast reverse/forward, hold down

either of them.

Disc Player (CD-DA disc):

Previous/next track

Disc Player (MP3/WMA disc):

Previous/next ﬁle

Folder Selection (MP3/WMA)

[}] (FOLDER): Next folder

[{] (FOLDER): Preceding folder

Pause

Press [BAND] (5/h).

Press again to cancel.

[5] (RANDOM)/[6] (REPEAT)

toggles on/off each play mode.

[3] (SCROLL)

scrolls the information on the display.

[{] [}] (FOLDER)

skip to the previous/next folder.

[OPEN]

opens the face plate

[SOURCE]

selects a source.

[DISP] (Display)

switches the information on the display.

[BAND] (5/h)(Play/Pause)

toggles between pause and play with

the player source.

[6] [7]

skip to the previous/next track/ﬁle in the player mode.

For fast reverse/fast forward, hold down either of them.

Caution

¡A disc which has both CD-DA data and MP3/WMA data on it may not be reproduced normally.

¡Do not insert a disc when the indicator lights.

¡Refer to the sections of “Notes on Discs” (apage 41)and “Notes on MP3/WMA” (apage 42).

¡This unit does not support 8 cm {3”} discs.

¡Do not insert foreign objects into the disc slot.

Andere Handbücher für SiriusXM CQ-RXBT490U

Inhaltsverzeichnis

Andere Panasonic Medienplayer Handbücher

Panasonic

Panasonic CQ-C5301N Bedienungsanleitung

Panasonic

Panasonic CQ-C7303N Bedienungsanleitung

Panasonic

Panasonic CQC1401U - AUTO RADIO/CD DECK Bedienungsanleitung

Panasonic

Panasonic CQ-C8400 Bedienungsanleitung

Panasonic

Panasonic SV-MP720VGC Bedienungsanleitung

Panasonic

Panasonic CQ-C3301N Bedienungsanleitung

Panasonic

Panasonic CQ-RX400N Benutzerhandbuch

Panasonic

Panasonic SV-MP100VGC Bedienungsanleitung

Panasonic

Panasonic CQ-HX1003W Bedienungsanleitung

Panasonic

Panasonic SV-MP500VGK Bedienungsanleitung

Panasonic

Panasonic KX-TD816 Betriebsanleitung

Panasonic

Panasonic FZ-21S1K Bedienungsanleitung

Panasonic

Panasonic SV-MP710VGC Bedienungsanleitung

Panasonic

Panasonic DMP-MST60 Bedienungsanleitung

Panasonic

Panasonic FZ-35S Bedienungsanleitung

Panasonic

Panasonic CQ-DFX203N Bedienungsanleitung

Panasonic

Panasonic SV-MP30V Bedienungsanleitung

Panasonic

Panasonic SV-MP710VEG Bedienungsanleitung

Panasonic

Panasonic Diga DMR-HWT230 Bedienungsanleitung

Panasonic

Panasonic LX-200PX Bedienungsanleitung

Panasonic

Panasonic LFE Series Bedienungsanleitung

Panasonic

Panasonic SV-SW31VGC Bedienungsanleitung

Panasonic

Panasonic PV-500 Bedienungsanleitung

Panasonic

Panasonic SV-SD75 Bedienungsanleitung

Beliebte Medienplayer Handbücher anderer Marken

Visual Land

Visual Land Impulse Bedienungsanleitung

Transcend

Transcend DMP10 Bedienungsanleitung

Philips

Philips GoGear Muse SA2MUS08 Bedienungsanleitung

Fantec

Fantec MM-HDRL Bedienungsanleitung

Dune HD

Dune HD Duo 4K Bedienungsanleitung

IAdea

IAdea HMP-505S Bedienungsanleitung

Camos

Camos MMS-1000 Bedienungsanleitung

Energy

Energy 75 Series Bedienungsanleitung

Z3 Technology

Z3 Technology DME-03 Bedienungsanleitung

Sony

Sony SVR-2000 Benutzerhandbuch

Meicheng

Meicheng HD-1080K12 Bedienungsanleitung

DENAFRIPS

DENAFRIPS ARCE Bedienungsanleitung

Topaz

Topaz CMS Media Player Gebrauchsanweisung

InFocus

InFocus LightCast Bedienungsanleitung

IconBiT

IconBiT XDS1003D Bedienungsanleitung

Quanmax

Quanmax QDSP-2090 Series Bedienungsanleitung

Samsung

Samsung MP-80S Bedienungsanleitung

Trigon Elektronik

Trigon Elektronik CHRONOLOG Bedienungsanleitung