Panasonic TH-42PW5 Bedienungsanleitung

ORDERNO. ITD0207019C0

D10 Canada:B07

WidePlasmaDisplay

TH-42PW5/ TH-42PWD5 / TH-37PW5/ TH-37PWD5

GP5DChassis

SPECIFICATIONS

Specifications

PowerSource: AC120V50/60Hz(UY/UZversion)

AC220-240V50/60Hz

(ExceptUY/UZversion model)

PowerConsumption: 225 W (37 inch), 295 W (42 inch)

2.4W (stand-bycondition)

(UY/UZversion)

2.8W (stand-bycondition)

(ExceptUY/UZversion model)

0.9W (Poweroff condition)

(UY/UZversion model)

1.5W (Poweroff condition)

(ExceptUY/UZversion model)

Plasma Displaypanel:Drivemethod ACtype

16:9aspectratio

ContrastRatio 3000:1

Screen size: 818 mm (W)×461 mm (H)

939 mm (diagonal)(37 inch)

920 mm (W)×518 mm (H)

1,056 mm (diagonal)(42 inch)

No. ofpixels

408,960 (852 (W)×480 (H))

[2,556 ×480 dots]

Operating condition:

Temperature 34 °F -104 °F (0°C-40 °C)

Humidity 20 %-80 %

Horizontal scanning frequency15.6-

110kHz

Vertical scanning frequency48 -120Hz

Connection terminals:

Video in 1.0Vp-p (75-ohm)

S-VIDEOIN/ (MINI DIN

4PIN) Y:1Vp-p (75-ohm), C:0.286 Vp-p

(75-ohm)

AUDIOIN/ (RCAPIN

JACK ×2) 0.5Vrms (high impedance)

COMPONENT/RGB

Y/G 1.0Vp-p/composite(75-ohm)

0.7Vp-p/non-composite(75-ohm)

PB/B 0.7Vp-p (75-ohm)

PR/R 0.7Vp-p (75-ohm)

HD 1.0-5.0Vp-p (high impedance)

VD 1.0-5.0Vp-p (high impedance)

AUDIOIN

(RCAPINJACK×2) 0.5Vrms (high impedance)

(HIGH-DENSITY

D-SUB15PIN) R,G,B/0.7Vp-p (75-ohm)

HD, VD/1.0-5.0Vp-p (high

impedance)

AUDIOIN(M3JACK) 0.5Vrms (high impedance)

SERIAL

EXTERNAL CONTROL

TERMINAL (D-SUB9PIN) RS-232CCOMPATIBLE

SPEAKERS(External

speakers)(6 ) 16W [8W+8W](10%THD)

Dimensions(W×H×D):920 mm ×550 mm 89 mm)(37 inch)

1,020 mm ×610 mm 89 mm)(42 inch)

Weight(Mass) approx. 24.0kg net(main unitonly)(37

inch)

approx. 28.2kg net(with speakers)(37

inch)

approx. 28.0kg net(main unitonly)(42

inch)

approx. 32.2kg net(with speakers)

(42inch)

Unauthorizedcopying and distribution isaviolation oflaw.

1. Applicablesignals

2. SafetyPrecautions

2.1. General Guidelines

1. Whenservicing, observetheoriginal leaddress. Ifashortcircuit

isfound, replace all parts whichhavebeenoverheatedor

damagedbytheshortcircuit.

2. Afterservicing, see toitthat all theprotectivedevices suchas

insulation barriers, insulation papersshieldsareproperlyinstalled.

3. Afterservicing, make thefollowing leakagecurrentchecks to

preventthecustomerfrombeing exposedtoshock hazards.

2.1.1. LeakageCurrentColdCheck

1. Unplug theACcordand connect ajumperbetweenthetwoprongs

on theplug.

2. Measuretheresistance value, withanohmmeter, betweenthe

jumperedACplug and eachexposedmetalliccabinet parton the

equipmentsuchas screwheads, connectors, control shafts, etc.

Whentheexposedmetallicparthas areturnpathtothechassis,

thereading shouldbebetween1M and 5.2M . / Whenthe

exposedmetal does nothaveareturnpathtothechassis, the

reading must be . Figure1

2.1.2. LeakageCurrentHotCheck (See Figure 1 .)

1. Plug theACcorddirectlyintotheACoutlet. Donotuse an

isolation transformerforthischeck.

2. Connect a1.5k , 10 watts resistor, inparallel witha0.15 F

capacitors, betweeneachexposedmetallicparton theset and a

good earthground suchas awaterpipe, as shownin Figure1.

3. Use anACvoltmeter, with1000 ohms/voltormoresensitivity, to

measurethepotential across theresistor.

4. Check eachexposedmetallicpart, and measurethevoltageat

eachpoint.

5. Reverse theACplug intheACoutlet and repeat eachoftheabove

measurements.

6. Thepotential at anypointshouldnotexceed0.75 volts RMS. A

leakagecurrenttester(Simpson Model 229 orequivalent) maybe

usedtomake thehotchecks, leakagecurrentmust notexceed1/2

milliamp. Incase ameasurementisoutsideofthelimits specified,

thereisapossibilityofashock hazard, and theequipmentshould

berepairedand recheckedbeforeitisreturnedtothecustomer.

3. Prevention of ElectroStaticDischarge (ESD) to

ElectrostaticallySensitive(ES) Devices

Somesemiconductor (solidstate)devices canbedamagedeasilybystaticelectricity. Such

componentscommonlyarecalledElectrostaticallySensitive (ES)Devices. Examples oftypical

ES devices areintegratedcircuitsand somefield-effecttransistorsand semiconductor "chip"

components. Thefollowing techniques shouldbeusedtohelpreduce theincidence of

componentdamagecausedbyelectro staticdischarge(ESD).

1. Immediatelybeforehandling anysemiconductorcomponentor

semiconductor-equippedassembly, drainoff anyESDon your

bodybytouching aknownearthground. Alternatively, obtainand

wearacommerciallyavailabledischarging ESDwrist strap,

whichshouldberemovedforpotential shock reasonspriorto

applying powertotheunitundertest.

2. Afterremoving anelectrical assemblyequippedwithES devices,

place theassemblyon aconductivesurface suchas alminumfoil,

topreventelectrostaticchargebuildup orexposureofthe

assembly.

3. Use onlyagrounded-tipsoldering iron tosolderorunsolderES

devices.

4. Use onlyananti-staticsolderremoval device. Somesolder

removal devices notclassifiedas "anti-static(ESDprotected)"can

generate electrical chargesufficienttodamageES devices.

5. Donotuse freon-propelledchemicals. These cangenerate

electrical charges sufficienttodamageES devices.

6. DonotremoveareplacementES device fromits protective

packageuntil immediatelybeforeyou arereadytoinstall it. (Most

replacementES devices arepackagedwithleadselectrically

shortedtogetherbyconductivefoam, alminumfoil or

comparableconductivematerial).

7. Immediatelybeforeremoving theprotectivematerial fromthe

leadsofareplacementES device, touchtheprotectivematerial to

thechassisorcircuitassemblyintowhichthedevice will be

installed.

Caution

Besureno powerisappliedtothechassisorcircuit, and observe

all othersafetyprecautions.

8. Minimizebodilymotionswhenhandling unpackagedreplacement

ES devices. (Otherwise hamless motion suchas thebrushing

togetherofyourclothes fabricorthelifting ofyourfootfroma

carpetedfloorcangenerate staticelectricity(ESD)sufficient

todamageanES device).

4. About lead free solder(PbF)

Note:Leadislistedas (Pb)intheperiodictableofelements.

Intheinformation below, Pbwill refertoLeadsolder, and PbF will refertoLeadFree Solder.

TheLeadFree Solderusedinour manufacturing process and discussedbelowis(Sn+Ag+Cu).

ThatisTin(Sn), Silver(Ag)and (Cu)although othertypes areavailable.

Thismodel uses PbFree solderinit’smanufactureduetoenvironmental conservation issues.

For service and repairwork, we’dsuggesttheuse ofPbfree solderas well, although Pbsolder

may beused.

PCBsmanufacturedusing leadfree solderwill have thePbF withinaleafSymbol

stampedon theback ofPCB.

Caution

-Pbfree solderhas ahighermelting pointthanstandardsolder.

Typicallythemelting pointis50 ~70 °F(30~40 °C)higher. Please

use ahigh temperaturesoldering iron and set itto700 ±20 °F(370

±10 °C).

-Pbfree solderwill tend tosplashwhenheatedtoo high (about1100

°For600 °C).

Ifyou must use Pbsolder, please completelyremoveall ofthePb

free solderon thepinsorsolderarea beforeapplying Pbsolder. If

thisisnotpractical, besuretoheat thePbfree solderuntil itmelts,

beforeapplying Pbsolder.

-Afterapplying PbF soldertodoublelayeredboards, please check

thecomponentsideforexcess solderwhichmayflow ontothe

opposite side. (see figurebelow)

SuggestedPbfree solder

Thereareseveral kindsofPbfree solderavailablefor purchase. Thisproductuses Sn+Ag+Cu

(tin, silver, copper)solder. However, Sn+Cu(tin, copper), Sn+Zn+Bi (tin, zinc, bismuth)soldercan

alsobeused.

5. PCB Structuresheet of GP5Dchassis

Board Name Function Remarks

D1 FormatConverter 1

D2 PlasmaAISub-FieldProcessor 1

ZAudioout

SS SustainOut 1

SC Scanout 1

SU Sustainconnection (Upper) 1

SD Sustainconnection (Lower) 1

C1 DataDrive (LowerRight)

C2 DataDrive (LowerLeft)

H3 Speakerterminal

S1 Powerswitch

SS2 Sustainconnection (Upper)

SS3 Sustainconnection (Lower)

V1 FrontSW. &Remotereceiver

FLinefilter

PPowersupply 1

HX PC_type_Inputterminal

HY BNC_type_Inputterminal 2

HZ RCAtype_Inputterminal 3

Remarks

1. Recommend PCB'sforinitial service forGP5Dchassis.

2. ForSystemmodel exceptBX, EX version

3. ForConsumermodel exceptBX, EX version

6. Service Hint

7. Location of Lead Wiring

8. Adjustment Procedure

8.1. +B Set-up

8.1.1. Item/ Preparation

1. InputaGreyscalesignal.

Andere Handbücher für TH-42PW5

Dieses Handbuch passt für folgende Modelle

Andere Panasonic Monitor Handbücher

Panasonic

Panasonic TH-37PH9UK Bedienungsanleitung

Panasonic

Panasonic WV-BM80 Bedienungsanleitung

Panasonic

Panasonic TH50PH10UKA - 50" Plasma Panel Bedienungsanleitung

Panasonic

Panasonic PANAFLAT LC-90S Bedienungsanleitung

Panasonic

Panasonic TH-65PB1W Betriebsanleitung

Panasonic

Panasonic TH-47LF5E Bedienungsanleitung

Panasonic

Panasonic BTLH2600W - 26" HD MONITOR Bedienungsanleitung

Panasonic

Panasonic WVCM1420 - COLOR MONITOR Bedienungsanleitung

Panasonic

Panasonic Viera TH-65PF9 Bedienungsanleitung

Panasonic

Panasonic AIG707WCL1G2 Bedienungsanleitung

Panasonic

Panasonic WV-CM2000 Bedienungsanleitung

Panasonic

Panasonic BT-LH2550 Bedienungsanleitung

Panasonic

Panasonic EJ-MLA32Z2 Bedienungsanleitung

Panasonic

Panasonic TH-42LF25U Bedienungsanleitung

Panasonic

Panasonic WVLC1710 - LCD MONITOR Bedienungsanleitung

Panasonic

Panasonic PT- 47WX49E Bedienungsanleitung

Panasonic

Panasonic TH-85PF12U Bedienungsanleitung

Panasonic

Panasonic CT-32HL43 Bedienungsanleitung

Panasonic

Panasonic TH-50PH30E Bedienungsanleitung

Panasonic

Panasonic PT-50LCZ70 - 50" Rear Projection TV Bedienungsanleitung

Panasonic

Panasonic BTS901YN - COLOR MONITOR Bedienungsanleitung

Panasonic

Panasonic TH-55LFV9U Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PW3 Bedienungsanleitung

Panasonic

Panasonic lh1760 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Acer

Acer CB382CUR Bedienungsanleitung