Panasonic TH42LF20U - 42" HD LCD TV Bedienungsanleitung

Unauthorized copying and distribution is a violation

of law.

Order Number MTNC100773CE

FULL HD LCD Display

Model No. TH-42LF20U

Model No. TH-47LF20U

TABLE OF CONTENTS

PAGE PAGE

1 Safety Precautions----------------------------------------------- 3

1.1. General Guidelines---------------------------------------- 3

2 Warning -------------------------------------------------------------- 4

2.1. Prevention of Electrostatic Discharge (ESD)

to Electrostatically Sensitive (ES) Devices---------- 4

2.2. About lead free solder (PbF)---------------------------- 5

3 Service Navigation ----------------------------------------------- 6

3.1. Applicable signals ----------------------------------------- 6

4 Specifications ----------------------------------------------------- 8

5 Operating Instructions------------------------------------------ 9

6 Service Mode ----------------------------------------------------- 11

6.1. Service Menu Function (1) ----------------------------- 11

6.2. Service Menu Function (2) -----------------------------12

6.3. Service Mode Function (1) -----------------------------13

6.4. Service Mode Function (2) -----------------------------14

7 Troubleshooting Guide ----------------------------------------15

8 Disassembly and Assembly Instructions ---------------16

8.1. Flowchart for disassembly------------------------------16

8.2. Preparations -----------------------------------------------17

8.3. Pedestal (option) removal------------------------------ 17

8.4. Rear cover removal-------------------------------------- 17

8.5. Replacement method for main board and jack

board -------------------------------------------------------- 18

8.6. Replacement method for Power board ------------- 19

8.7. Replacement method for AC cord bracket -------- 19

8.8. Cabinet back removal (42 type) ---------------------- 20

8.9. Cabinet back removal (47 type) ---------------------- 20

8.10. When removing the cabinet back with the

board connected ----------------------------------------- 20

8.11. Replacement method for speakers ------------------ 20

8.12. Key SW board replacement --------------------------- 20

8.13. Connector board removal ------------------------------ 21

8.14. LCD panel replacement -------------------------------- 21

8.15. Replacement method for RC+LED board---------- 22

8.16. Cabinet front replacement ----------------------------- 22

8.17. Cabinet back replacement ----------------------------- 23

9 Block Diagram --------------------------------------------------- 25

9.1. Block (1 of 2) Diagram ---------------------------------- 25

All manuals and user guides at all-guides.com

all-guides.com

TC-42LF20U / TC-47LF20U

9.2. Block (2 of 2) Diagram ---------------------------------- 26

10 Wiring Connection Diagram--------------------------------- 27

10.1. Wiring Connection Diagram (1)----------------------- 27

10.2. Wiring Connection Diagram (2)----------------------- 29

10.3. Wiring Connection Diagram (3)----------------------- 30

10.4. Wiring Connection Diagram (4)----------------------- 31

11 Exploded View and Replacement Parts List ----------- 32

11.1. Exploded View and Mechanical Replacement

Parts List --------------------------------------------------- 32

11.2. Mechanical Replacement Parts List (42 inch) ---- 47

11.3. Mechanical Replacement Parts List (47 inch) ---- 48

11.4. Electrical Replacement Boards list (42 inch) ------ 49

11.5. Electrical Replacement Boards list (47 inch) ------ 49

11.6. Boards Layout--------------------------------------------- 49

All manuals and user guides at all-guides.com

TC-42LF20U / TC-47LF20U

1 Safety Precautions

1.1. General Guidelines

1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials.

2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the

wires have been broken or disconnected, do not attempt to repair or re-wire the units. Replace the entire wiring unit instead.

3. When conducting repairs and servicing, do not twist the Fasten connectors but plug them straight in or unplug them straight

out.

4. When servicing, observe the original lead dress. If a short circuit is found, replace all parts which have been overheated or

damaged by the short circuit.

5. After servicing, see to it that all the protective devices such as insulation barriers, insulation papers shields are properly

installed.

6. After servicing, make the following leakage current checks to prevent the customer from being exposed to shock hazards.

1.1.1. Leakage Current Cold Check

1. Unplug the AC cord and connect a jumper between the

two prongs on the plug.

2. Measure the resistance value, with an ohmmeter,

between the jumpered AC plug and each exposed metal-

lic cabinet part on the equipment such as screwheads,

connectors, control shafts, etc. When the exposed metal-

lic part has a return path to the chassis, the reading

should be between 1Mohm and 5.2Mohm.

When the exposed metal does not have a return path to

the chassis, the reading must be .

Figure 1

1.1.2. Leakage Current Hot Check (See

Figure 1 .)

1. Plug the AC cord directly into the AC outlet. Do not use

an isolation transformer for this check.

2. Connect a 1.5kohm, 10 watts resistor, in parallel with a

0.15µF capacitors, between each exposed metallic part

on the set and a good earth ground such as a water pipe,

as shown in Figure 1 .

3. Use an AC voltmeter, with 1000 ohms/volt or more sensi-

tivity, to measure the potential across the resistor.

4. Check each exposed metallic part, and measure the volt-

age at each point.

5. Reverse the AC plug in the AC outlet and repeat each of

the above measurements.

6. The potential at any point should not exceed 0.75 volts

RMS. A leakage current tester (Simpson Model 229 or

equivalent) may be used to make the hot checks, leakage

current must not exceed 1/2 milliamp. In case a mea-

surement is outside of the limits specified, there is a pos-

sibility of a shock hazard, and the equipment should be

repaired and rechecked before it is returned to the cus-

tomer.

All manuals and user guides at all-guides.com

TC-42LF20U / TC-47LF20U

2 Warning

2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensi-

tive (ES) Devices

Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec-

trostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and

semiconductor “chip” components. The following techniques should be used to help reduce the incidence of component damage

caused by electrostatic discharge (ESD).

1. Immediately before handling any semiconductor component or semiconductor-equipped assembly, drain off any ESD on your

body by touching a known earth ground. Alternatively, obtain and wear a commercially available discharging ESD wrist strap,

which should be removed for potential shock reasons prior to applying power to the unit under test.

2. After removing an electrical assembly equipped with ES devices, place the assembly on a conductive surface such as alumi-

num foil, to prevent electrostatic charge buildup or exposure of the assembly.

3. Use only a grounded-tip soldering iron to solder or unsolder ES devices.

4. Use only an anti-static solder removal device. Some solder removal devices not classified as “anti-static (ESD protected)” can

generate electrical charge sufficient to damage ES devices.

5. Do not use freon-propelled chemicals. These can generate electrical charges sufficient to damage ES devices.

6. Do not remove a replacement ES device from its protective package until immediately before you are ready to install it. (Most

replacement ES devices are packaged with leads electrically shorted together by conductive foam, aluminum foil or compara-

ble conductive material).

7. Immediately before removing the protective material from the leads of a replacement ES device, touch the protective material

to the chassis or circuit assembly into which the device will be installed.

Caution

Be sure no power is applied to the chassis or circuit, and observe all other safety precautions.

8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise ham less motion such as the brush-

ing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD) sufficient

to damage an ES device).

All manuals and user guides at all-guides.com

TC-42LF20U / TC-47LF20U

2.2. About lead free solder (PbF)

Note: Lead is listed as (Pb) in the periodic table of elements.

In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder.

The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu).

That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.

This model uses Pb Free solder in it’s manufacture due to environmental conservation issues. For service and repair work, we’d

suggest the use of Pb free solder as well, although Pb solder may be used.

PCBs manufactured using lead free solder will have the PbF within a leaf Symbol PbF stamped on the back of PCB.

Caution

• Pb free solder has a higher melting point than standard solder. Typically the melting point is 50 ~ 70 °F (30~40 °C) higher. Please

use a high temperature soldering iron and set it to 700 ± 20 °F (370 ± 10 °C).

• Pb free solder will tend to splash when heated too high (about 1100 °F or 600 °C).

If you must use Pb solder, please completely remove all of the Pb free solder on the pins or solder area before applying Pb sol-

der. If this is not practical, be sure to heat the Pb free solder until it melts, before applying Pb solder.

• After applying PbF solder to double layered boards, please check the component side for excess solder which may flow onto the

opposite side. (see figure below)

Suggested Pb free solder

There are several kinds of Pb free solder available for purchase. This product uses Sn+Ag+Cu (tin, silver, copper) solder. How-

ever, Sn+Cu (tin, copper), Sn+Zn+Bi (tin, zinc, bismuth) solder can also be used.

All manuals and user guides at all-guides.com

TC-42LF20U / TC-47LF20U

3 Service Navigation

3.1. Applicable signals

All manuals and user guides at all-guides.com

all-guides.com

TC-42LF20U / TC-47LF20U

All manuals and user guides at all-guides.com

TC-42LF20U / TC-47LF20U

4 Specifications

Power Source 110 - 127 V AC, 50/60Hz

Power Consumption

Rated Power Consumption 250 W (42 inch) 300 W (47 inch)

On mode Average

Power Consumption*

200 W (42 inch) 255 W (47 inch)

Stand-by condition 0.1 W (42 inch) 0.1 W (47 inch)

LCD Display panel 42-inch IPS panel, 16:9 aspect ratio (42 inch) 47-inch IPS panel, 16:9 aspect ratio (47 inch)

Screen size 36.6 " (930 mm) (W) ×20.5 " (523 mm) (H) ×42.0 " (1,067 mm) (diagonal) (42 inch)

40.9 " (1,040 mm) (W) ×23.0 " (585 mm) (H) ×46.9 " (1,193 mm) (diagonal) (47 inch)

(No. of pixels) 2,073,600 (1,920 (W) ×1,080 (H)) (42 inch) 2,073,600 (1,920 (W) ×1,080 (H)) (47 inch)

(No. of pixels) [5,760 ×1,080 dots] [5,760 ×1,080 dots]

Operating condition

Temperature 32 °F - 104 °F (0 °C - 40 °C)

Humidity 20 % - 80 %

Applicable signals

Color System NTSC, PAL, PAL60, SECAM, NTSC 4.43, PAL M, PAL N

Scanning format 525 (480) / 60i 60p, 625 (575) / 50i 50p, 750 (720) / 60p 50p, 1125 (1080) /

60i 60p 50i 50p 24p 25p 30p 24sF, 1250 (1080) / 50i

PC signals VGA, SVGA, XGA, SXGA

UXGA ..... (compressed)

Horizontal scanning frequency 30 - 110 kHz

Vertical scanning frequency 48 - 120 Hz

Connection terminals

AV IN VIDEO BNC 1.0 Vp-p (75-ohm)

S-VIDEO Mini DIN 4PIN Y: 1.0 Vp-p (75-ohm), C: 0.286 Vp-p (75-ohm)

AUDIO L-R RCA Pin jack ×2 0.5 Vrms

HDMI 1/2 TYPE A Connector ×2

COMPONENT / RGB IN

G/Y BNC with sync 1.0 Vp-p (75-ohm)

B/PB/CBBNC 0.7 Vp-p (75-ohm)

R/PR/CRBNC 0.7 Vp-p (75-ohm)

AUDIO L-R RCA PIN JACK ×2 0.5 Vrms

DVI-D IN DVI-D 24 Pin Compliance with DVI Revision 1.0

Content Protection Compatible with HDCP 1.1

AUDIO Stereo mini jack (M3) ×1 0.5 Vrms, Shared with PC IN

PC IN High-Density Mini D-sub 15 Pin G with sync 1.0 Vp-p (75-ohm)

G without sync 0.7 Vp-p (75-ohm)

B:0.7 Vp-p (75-ohm)

R:0.7 Vp-p (75-ohm)

HD / VD:1.0 - 5.0 Vp-p (high impedance)

AUDIO Stereo mini jack (M3) ×1 0.5 Vrms, Shared with PC IN

SERIAL External Control Terminal

D-sub 9 Pin RS-232C compatible

Sound

Speakers 2.0” (50 mm) ×3.6” (90 mm) ×2 pcs

Audio Output 10 W [5 W + 5 W] (10 % THD)

Accessories Supplied

Remote Control Transmitter N2QAYB000535

Batteries AA Size ×2

Clamper TMME289 ×3

Dimensions (W ×H ×D) 38.2" (968 mm) ×22.1" (561 mm) ×4.0" (101 mm)

(42 inch)

38.2" (968 mm) ×22.1" (561 mm) ×4.0" (101 mm)

(47 inch)

Mass (weight) approx. 39.7 lbs (42 inch) approx. 50.7 lbs (47 inch)

* Based on IEC 62087 Ed.2 section 11.6.1 measurement method.

Note:

• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.

All manuals and user guides at all-guides.com

TC-42LF20U / TC-47LF20U

5 Operating Instructions

All manuals and user guides at all-guides.com

TC-42LF20U / TC-47LF20U

All manuals and user guides at all-guides.com

Andere Handbücher für TH42LF20U - 42" HD LCD TV

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Monitor Handbücher

Panasonic

Panasonic TH-86SQ2HW Bedienungsanleitung

Panasonic

Panasonic DT1300MS - DISPLAY MONITOR Bedienungsanleitung

Panasonic

Panasonic TH-65PF20U Bedienungsanleitung

Panasonic

Panasonic PT53TWD64J - 53" PROJECTION TV Bedienungsanleitung

Panasonic

Panasonic TH-50PHW3 Bedienungsanleitung

Panasonic

Panasonic BTLH1800 - LCD HD MONITOR Bedienungsanleitung

Panasonic

Panasonic WVCM1430 - COLOR CAMERA Bedienungsanleitung

Panasonic

Panasonic TH-85PF12U Bedienungsanleitung

Panasonic

Panasonic WVBM1900 - 19" B/W MONITOR Bedienungsanleitung

Panasonic

Panasonic WVBM1410 - B/W MONITOR Bedienungsanleitung

Panasonic

Panasonic TH-37PW7BX Bedienungsanleitung

Panasonic

Panasonic TH50PH10UKA - 50" Plasma Panel Bedienungsanleitung

Panasonic

Panasonic BT-LH900 Bedienungsanleitung

Panasonic

Panasonic TH-47LFV5W Bedienungsanleitung

Panasonic

Panasonic Viera TH-50PF11 Bedienungsanleitung

Panasonic

Panasonic TH-37PG9W Bedienungsanleitung

Panasonic

Panasonic M-900 Series Bedienungsanleitung

Panasonic

Panasonic TH-50PF20E Bedienungsanleitung

Panasonic

Panasonic TH42PS9UK - 42" PLASMA TV Bedienungsanleitung

Panasonic

Panasonic BT-L1500PJ Bedienungsanleitung

Panasonic

Panasonic TH-42PWD6 Bedienungsanleitung

Panasonic

Panasonic CQ-VD7001N Bedienungsanleitung

Panasonic

Panasonic TY-LA2004 Gebrauchs- und Pflegehandbuch

Panasonic

Panasonic TH-47LFT30W Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung

Acer

Acer CB382CUR Bedienungsanleitung