Panasonic KX-NS500 Bedienungsanleitung

Hybrid IP-PBX

Model No. KX-NS500

Getting Started

Thank you for purchasing this Panasonic product.

Please read this manual carefully before using this product and save this manual for future use.

In particular, be sure to read "1.2 For Your Safety (Page 5)" before using this product.

KX-NS500: PFMPR Software File Version 004.20000 or later.

Manuals and supporting information are provided on the Panasonic Web site at:

http://panasonic.net/pcc/support/pbx/

Table of Contents

1Before Installation ....................................................................................3

1.1 Outline ................................................................................................................................4

1.2 For Your Safety .................................................................................................................5

1.3 Unpacking ..........................................................................................................................7

2 Installation ................................................................................................9

2.1 Opening/Closing the Top Cover ....................................................................................10

2.2 Installing DSP Cards .......................................................................................................12

2.3 Frame Earth Connection ................................................................................................14

2.4 LAN Connection ..............................................................................................................14

2.4.1 LAN Connection for the Main Unit ..................................................................................14

2.4.2 LAN Connections for IP Telephones ..............................................................................16

2.5 Connecting Extension ....................................................................................................18

3 Before Programming .............................................................................19

3.1 Starting the PBX ..............................................................................................................20

3.2 PC Connection ................................................................................................................23

3.3 Starting Web Maintenance Console ..............................................................................24

4 Programming ..........................................................................................27

4.1 Programming the PBX ....................................................................................................28

4.1.1 Easy Setup Wizard .........................................................................................................28

4.1.2 Installing the Virtual IP Cards to the PBX .......................................................................34

4.1.3 Installing Additional Activation Keys ...............................................................................34

4.2 Programming SIP Trunks ...............................................................................................36

4.3 Assigning Networking Information to IP Telephones ..................................................38

4.3.1 Assigning IP Addressing Information .............................................................................38

4.3.2 Registering IP Telephones .............................................................................................53

5 Confirming the Connection ...................................................................59

5.1 Making and Receiving Calls ...........................................................................................60

2 Getting Started

Table of Contents

Section 1

Before Installation

Getting Started 3

1.1 Outline

This manual provides basic information about starting the PBX and using IP telephones.

Note

•In this manual, the suffix of each model number (e.g., KX-NS500NE) is omitted unless necessary.

•In this manual, terms are defined as follows:

IP-PT

IP Proprietary Telephone

SIP extension

Extensions of the PBX which use Session Initiation Protocol for communication.

SIP phone

KX-UT series SIP phone

Panasonic SIP Phone (P-SIP e.g,. KX-HDV series)

IP conferencing phone (e.g., KX-NT700)

Third party SIP phone (SIP hardphones/SIP softphones)

•Operation of the KX-NS0154 depends on the PBX software file version and the firmware version of the

KX-NS0154. You can confirm the compatibility on the Panasonic Web site:

http://panasonic.net/pcc/support/pbx/

About the Other Manuals

User Manual

Provides operating instructions for end users using IP-PTs, SIP phones, SLTs, PSs, or DSS Consoles.

Installation Manual

Provides instructions for installing the hardware and maintenance of the PBX.

Feature Guide

Describes all basic, optional and programmable features of the PBX.

PC Programming Manual

Provides step-by-step instructions for performing system programming using a PC.

PT Programming Manual

Provides step-by-step instructions for performing system programming using a PT.

Open Source Software

This product uses Open Source Software. For details, click the Information button in Web Maintenance

Console.

4 Getting Started

1.1 Outline

1.2 For Your Safety

To prevent personal injury and/or damage to property, be sure to observe the following safety precautions.

The following symbols classify and describe the level of hazard and injury caused when this unit is

operated or handled improperly.

WARNING

This notice means that misuse could result in death

or serious injury.

CAUTION

This notice means that misuse could result in injury

or damage to property.

The following types of symbols are used to classify and describe the type of instructions to be

observed.

This symbol is used to alert users to a specific operating procedure that must not be performed.

This symbol is used to alert users to a specific operating procedure that must be followed in

order to operate the unit safely.

Getting Started 5

1.2 For Your Safety

WARNING

•Proper earthing (connection to earth) is very important to reduce the risk to the user of electrocution or to

protect the PBX from the bad effects of external noise in the case of a lightning strike.

•The earthing wire of the AC cable has an effect against external noise and lightning strikes, but it may not

be enough to protect the PBX and to ensure electromagnetic compatibility. A permanent connection

between earth and the earth terminal of the PBX must be made.

•Make sure that the AC outlet is properly earthed, then securely connect the 3-pin AC plug including the

earthed pin.

CAUTION

•When installing or removing the optional service cards, do not put pressure on any parts of the mother

board. Doing so may result in damage to the PBX.

•Once you have started the PBX, if you unplug the PBX, do not initialise it again as described in "System

Initialisation Procedure". Otherwise, your programmed data will be cleared.

•Before opening the top cover, the AC power cord must be removed from the AC inlet.

•Disconnect the AC power source before servicing the equipment.

•For safety reasons, close the top cover and tighten the screws before operating the PBX.

•For earthing wire, green-and-yellow insulation is required, and the cross-sectional area of the conductor

must be more than 0.75 mm2 or 18 AWG.

•Use only the AC power cord included with the PBX. A certified power supply cord has to be used with this

equipment. The relevant national installation and/or equipment regulations shall be considered. A certified

power supply cord not lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227

(designation H05VV-F 3G 0.75 mm²) shall be used.

•Before touching the product (PBX, cards, etc.), discharge static electricity by touching ground or wearing

an earthing strap. Failure to do so may cause the PBX to malfunction due to static electricity.

•When installing or removing the optional service cards, the power switch must be turned off, and the AC

power cord must be removed from the AC inlet.

•The power supply cord is used as the main disconnect device. Ensure that the AC outlet is located near

the equipment and is easily accessible.

WARNING

This is a class A product. In a domestic environment this product may cause radio interference in which

case the user may be required to take adequate measures.

6 Getting Started

1.2 For Your Safety

1.3 Unpacking

Check the package contents.

KX-NS500

Main Unit ´ 1

CD-ROM*1 (including manuals, etc.) ´ 1

AC power cord*2

Hook clip

19-inch rack attachment bracket x 2

Screw x 6 (For 19 inch rack)

Screw x 3 (For Wall Mounting)

Washer x 3 (For Wall Mounting)

*1 The number of included CD-ROMs varies according to the country/area.

*2 The PBX with the suffix LA is supplied with 2 types of AC power cord. Please use whichever is appropriate for the country/area.

KX-NS520

Expansion unit

CD-ROM(s)*1

AC power cord*2

Hook clip

Ferrite core x 2

19-inch rack attachment bracket x 2

Screw x 6 (For 19 inch rack)

Screw x 3 (For Wall Mounting)

Washer x 3 (For Wall Mounting)

*1 The number of included CD-ROMs varies according to the country/area.

*2 The PBX with the suffix LA is supplied with 2 types of AC power cord. Please use whichever is appropriate for the country/area.

Necessary items (not supplied):

•Earthing wire for PBX earth connection.

•Ethernet straight cables*1 for the LAN and PC connections.

•RJ45 connectors for the LAN and PC connections by Ethernet straight cables.

•Switching hubs and routers for VoIP network configuration.

*1 The cables should be 10BASE-T/100BASE-TX CAT 5 (Category 5) or higher, or 1000BASE-T CAT 5e (Enhanced Category 5) or

higher.

Getting Started 7

1.3 Unpacking

8 Getting Started

1.3 Unpacking

Section 2

Installation

Getting Started 9

2.1 Opening/Closing the Top Cover

Opening the Top Cover

KX-NS500/KX-NS520

CAUTION

Before opening the top cover, the AC power cord must be removed from the AC inlet.

1. Confirm that the power switch is turned off and disconnect the power cable.

Power Switch

Note

In order to turn off the PBX’s power, a system shutdown using Web Maintenance Console must first

be performed. For details, refer to "5.4 System Control—System Shutdown" in the PC Programming

Manual.

2. Turn the screws anticlockwise to loosen.

10 Getting Started

2.1 Opening/Closing the Top Cover

Andere Handbücher für KX-NS500

Inhaltsverzeichnis

Andere Panasonic Telefonanlage Handbücher

Panasonic

Panasonic KX-TD500 Bedienungsanleitung

Panasonic

Panasonic KX-TDA150 Betriebsanleitung

Panasonic

Panasonic KX-TDA15 Bedienungsanleitung

Panasonic

Panasonic KX-TD816NE Technisches Datenblatt

Panasonic

Panasonic KX-NCP500 Bedienungsanleitung

Panasonic

Panasonic KX-TEM824 Bedienungsanleitung

Panasonic

Panasonic KX-TD500 Technisches Datenblatt

Panasonic

Panasonic KX-TDA200AL Bedienungsanleitung

Panasonic

Panasonic KX-TD816 Technisches Datenblatt

Panasonic

Panasonic KX-TDA600 - Hybrid IP PBX Control Unit Max. 1008... Bedienungsanleitung

Panasonic

Panasonic KXTD7690 - BTS 2.4 GHZ WIRELESS Bedienungsanleitung

Panasonic

Panasonic KX-NS1000 Bedienungsanleitung

Panasonic

Panasonic KX-NS300 Bedienungsanleitung

Panasonic

Panasonic KX-TD816C Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Betriebsanleitung

Panasonic

Panasonic KX-TD1232CE Montage- und Bedienungsanleitung

Panasonic

Panasonic HYBRID IP-PBX KX-TDA200 Bedienungsanleitung

Panasonic

Panasonic KX-TVP200 Bedienungsanleitung

Panasonic

Panasonic KX-TDE200GR Bedienungsanleitung

Panasonic

Panasonic KX-TVP200 Bedienungsanleitung

Panasonic

Panasonic KX-TDA30 Bedienungsanleitung

Panasonic

Panasonic KX-TDA30 Bedienungsanleitung

Panasonic

Panasonic KX-TDA50 Bedienungsanleitung

Panasonic

Panasonic HYBRID IP-PBX KX-TDA100 Betriebsanleitung

Beliebte Telefonanlage Handbücher anderer Marken

Allo.com

Allo.com Nano 2 Bedienungsanleitung

ZYCOD

ZYCOD ZX50 Bedienungsanleitung

LV switch

LV switch IPPBX800 Gebrauchsanweisung

Edge-Core

Edge-Core VST3305 Bedienungsanleitung

Rauland-Borg

Rauland-Borg Telecenter IV Bedienungsanleitung

Grandstream Networks

Grandstream Networks UCM6208 Bedienungsanleitung

ATCOM

ATCOM IPPBX IP02 Bedienungsanleitung

bintec elmeg

bintec elmeg elmeg hybird 600 Bedienungsanleitung

MCK

MCK EXTender PBXgateway Bedienungsanleitung

NEC

NEC SL1000 Bedienungsanleitung

Epygi

Epygi Quadro Quadro 2xi Bedienungsanleitung

SMC Networks

SMC Networks TigerVoIP SMCPBX10 Bedienungsanleitung

AGFEO

AGFEO AC 14 analog Bedienungsanleitung

Nortel

Nortel QSY22 Bedienungsanleitung

Epygi

Epygi Quadro Quadro 4xa Bedienungsanleitung

Samsung

Samsung NX-308 Bedienungsanleitung

SpectraLink

SpectraLink Link 3000 Handbuch

Allo.com

Allo.com Nano 2 Bedienungsanleitung