Panasonic TH-42PA60L Bedienungsanleitung

rights reserved. Unauthorized copying and

distribution is a violation of law.

TH-42PA60L

GP9DE Chassis

Plasma Television

Please file and use this manual together with the service manual for Model No.TH-42PA60A,

Order No.ITD0603007.

Specifications

Power Source AC 110-220 V, 50 / 60 Hz

Power Consumption

Average use 294 W

Standby condition 0.3 W

Plasma Display panel

Drive method AC type

Aspect Ratio 16:9

Contrast Ratio Max 10000:1

Visible screen size

(No. of pixels) 106 cmV

920 mm (W) × 518 mm (H) × 1,056 mm (diagonal)

Sound

Speaker 12 cm × 6 cm × 2 pcs, 8 W

Audio Output 20 W (10 W + 10 W ), 10% THD

ORDER NO.ITD0604013AE

1 Difference PCB Structure sheet 4

2 Service Mode Function 5

2.1. How to enter SERVICE 1 5

2.2. How to enter SERVICE 2 5

2.3. Option Description 7

3 Adjustment 9

3.1. PAL panel white balance adjustment 9

3.2. HD white balance adjustment 10

3.3. Sub bright adjustment 11

3.4. ABL adjustment 12

3.5. Sub-Contrast adjustment 13

4 Conductor Views 15

4.1. TU-Board 15

4.2. DG-Board 16

5 Schematic and Block Diagram 19

5.1. Schematic Diagram Note 19

5.2. Main Block Diagram 20

5.3. TU-Board Block and Schematic Diagram 21

5.4. DG-Board (1 of 3) Block Diagram 22

5.5. DG-Board (2 of 3) Block Diagram 23

Receiving Systems /

Band name

Receiving Channels

(Regular TV) VHF BAND UHF BAND CATV

2-13 (NTSC M USA) 14-69 (NTSC M USA) 1-125 (USA CATV)

Aerial - Rear VHF / UHF

Operating Conditions Temperature : 0°C-40°C

Humidity : 20 % - 80 % RH (non-condensing)

Connection Terminals

AV1 Input AUDIO L-R RCA PIN Type × 2 0.5 V[rms]

VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 W)

SVIDEO Mini Din 4-pin Y: 1.0 V[p-p] (75 W) C: 0.286 V[p-p] (75 W)

AV2 Input AUDIO L-R RCA PIN Type × 2 0.5 V[rms]

VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 W)

COMPONENT Y1.0 V[p-p] (including synchronization)

PB/CB,P

R/CR±0.35 V[p-p]

AV3 Input AUDIO L-R RCA PIN Type × 2 0.5 V[rms]

VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 W)

COMPONENT Y1.0 V[p-p] (including synchronization)

PB/CB,P

R/CR±0.35 V[p-p]

Others HDMI Input TYPE A Connector

Audio Input RCA PIN Type × 2 0.5 V[rms]

Monitor

Output AUDIO L-R RCA PIN Type × 2 0.5 V[rms] (high impedance)

VIDEO RCA PIN Type × 1 1.0 V[p-p] (75 W)

Dimensions ( W × H × D )

1,068 mm × 701 mm × 97 mm (TV Set only)

1,068 mm × 764 mm × 320 mm (With Pedestal)

Weight

29.0 kg Net (TV Set only)

31.0 kg Net (With Pedestal)

Notes:

Design and Specifications are subject to change without notice. Weight and Dimensions shown are approximate.

CONTENTS

Page Page

TH-42PA60L

5.6. DG-Board (3 of 3) Block Diagram 24

5.7. DG-Board (1 of 8) Schematic Diagram 25

5.8. DG-Board (2 of 8) Schematic Diagram 26

5.9. DG-Board (3 of 8) Schematic Diagram 27

5.10. DG-Board (4 of 8) Schematic Diagram 28

5.11. DG-Board (5 of 8) Schematic Diagram 29

5.12. DG-Board (6 of 8) Schematic Diagram 30

5.13. DG-Board (7 of 8) Schematic Diagram 31

5.14. DG-Board (8 of 8) Schematic Diagram 32

6 Parts Location & Mechanical Replacement Parts List 33

6.1. Parts Location 33

6.2. Packing Exploded Views (1) 34

6.3. Packing Exploded Views (2) 35

6.4. Packing Exploded Views (3) 36

6.5. Stand Exploded Views 37

6.6. Mechanical Replacement Parts List (PDP TV) 38

6.7. Mechanical Replacement Parts List (Stand) 39

7 Electrical Replacement Parts List 40

7.1. Replacement Parts List Notes 40

7.2. Electrical Replacement Parts List 41

TH-42PA60L

1 Difference PCB Structure sheet

nPrint List

Board name Part No. Function Remarks

TH-42PA60A TH-42PA60L

C1 TNPA3799AB Data Draiver (Left)

C2 TNPA3800AB Data Draiver (Right)

STZTNP01BMTB Format Converter, Plasma AI Processor

HTNPA3760AC AV Terminal, AV switch

HC TNPA3852 JIG Connection

KTNPA3603AH Remote receiver, LED, Keyscan

PTNPA3911AB Power Supply

PA TNPA3761AH DC-DC Converter, Power SOS

STNPA3604AD Power Switch

SC TNPA3794AB Scan Drive

SD TNPA3875AB Scan Out (Lower)

SS TNPA3795AB Sustain Drive

SU TNPA3874AB Scan Out (Upper)

DG TNPA3756CQ TNPA3756CY Digital Signal Processor Changed

TA TNPA3768AC ----- Tuner Deleted

TU ----- TNPA3851 Tuner Added

TH-42PA60L

2 Service Mode Function

MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be

adjusted by remote control in Service Mode.

2.1. How to enter SERVICE 1

1.In sound menu, set BASS to MAXIMUM, and set TREBLE to MINIMUM.

2.Set the Volume to minimum, and set the off timer.

3.Simultaneously press Recall button on remote control and DOWN button [ ]ontheTVset.

2.2. How to enter SERVICE 2

1.Set the channel to CH99.

2.Select the EQ 12kHz.

3.Press Mute button on remote control and DOWN button [ ]ontheTVset.

Note:

To exit to Service mode, press EXIT or Power button on remote control.

TH-42PA60L

2.3. Option Description

TH-42PA60L

3 Adjustment

3.1. PAL panel white balance adjustment

Instrument Name Connection Remarks

W/B pattern (PAL-M or NTSC signal)

Color analyzer (Minolta CA-100 or equivalent) RF input

Panel surface User setting: Normal

Procedure Remarks

Asing time is longer than 15min.

Make sure the front panel to be used on the final set is fitted.

Make sure a color signal is not being shown before adjustment.

Put the color analyzer where there is little colour variation.

Complete the adjustment within 10 minutes after the turn on electricity.

Turn on the power supply again when it is not possible to complete it by aging etc.

1.Display the white balance pattern.

2.Check that the color balance is “cool”.

3.Enter the <Service1> mode.

4.Select “G-CUTOFF” item, using the color-key “Red” or “Green”, and set to “128”, using the

color-key “Yellow” or “Blue”.

Also, “B-CUTOFF” and “R-CUTOFF” set to “128”.

5.Set “G-DRIVE” at “224”.

6.Touch the signal receiver of color analyzer to the highlight window’s center, and adjust B

drive and R drive so x, y become the “Color balance Cool” in the below table.

7.Set “ALL-DRIVE” to “252”.

8.Set colorbalance to “Normal”.

9.Fix G cutoff , B cutoff and R cutoff at “128”.

10. Fix G drive at “224”.

11. Adjust B drive and R drive so the highlight window’s x, y become the “Color balance

“Normal” in the below table.

12. Set “ALL-DRIVE” to “252”.

13. Set color balance to “Warm”.

14. Set G cutoff, B cutoff and R cutoff to “128”.

15. Set G drive to “224”.

16. Adjust B drive and R drive so the highlight window’s x, y become the “Color balance Warm”

shown in the below table.

17. Set “ALL-DRIVE” to “252”.

Picture menu : Dynamic

ASPECT : 16:9

Highlight section

Signal amplitude 75%

TH-42PA60L

3.2. HD white balance adjustment

Instrument Name Connection Remarks

1080i W/B Pattern

Color analyzer(Minolta CA-100 or equivalent)

RF input

Panel surface User setting: Normal

Procedure Remarks

Asing time is longer than 15min.

Make sure the front panel to be used on the final set is fitted.

Make sure a color signal is not being shown before adjustment.

Put the color analyzer where there is little colour variation.

Complete the adjustment within 10 minutes after the turn on electricity.

Turn on the power supply again when it is not possible to complete it by aging etc.

1.Display the white balance pattern.

2.Check that the color balance is “cool”.

3.Enter the <Service1> mode.

4.Select “G-CUTOFF” item, using the color-key “Red” or “Green”, and set to “128”, using the

color-key “Yellow” or “Blue”.

Also, “B-CUTOFF” and “R-CUTOFF” set to “128”.

5.Set “G-DRIVE” at “224”.

6.Touch the signal receiver of color analyzer to the highlight window’s center, and adjust B

drive and R drive so x, y become the “Color balance Cool” in the below table.

7.Set “ALL-DRIVE” to “252”.

8.Set colorbalance to “Normal”.

9.Fix G cutoff , B cutoff and R cutoff at “128”.

10. Fix G drive at “224”.

11. Adjust B drive and R drive so the highlight window’s x, y become the “Color balance

“Normal” in the below table.

12. Set “ALL-DRIVE” to “252”.

13. Set color balance to “Warm”.

14. Set G cutoff, B cutoff and R cutoff to “128”.

15. Set G drive to “224”.

16. Adjust B drive and R drive so the highlight window’s x, y become the “Color balance Warm”

shown in the below table.

17. Set “ALL-DRIVE” to “252”.

Picture menu: Dynamic

ASPECT:16:9

Highlight section

Signal amplitude 75%

* The Color balance COOL differs from

Japanese model values.

TH-42PA60L

Andere Handbücher für TH-42PA60L

Inhaltsverzeichnis

Andere Panasonic Plasma-TV Handbücher

Panasonic

Panasonic TH-42PA20A Bedienungsanleitung

Panasonic

Panasonic TTH-37PWD8EK Bedienungsanleitung

Panasonic

Panasonic TXP65VT60E Bedienungsanleitung

Panasonic

Panasonic Viera TX-P42S20E Bedienungsanleitung

Panasonic

Panasonic Viera TH-42PZ77U Bedienungsanleitung

Panasonic

Panasonic TH-42PZ700U - 42" Plasma TV Kurzanleitung

Panasonic

Panasonic TH-103PB1U Bedienungsanleitung

Panasonic

Panasonic Viera TH-37PV8PA Bedienungsanleitung

Panasonic

Panasonic TH-42PX50UA Bedienungsanleitung

Panasonic

Panasonic TX-P42GT60B Bedienungsanleitung

Panasonic

Panasonic TH-37PG9U Einrichtungshandbuch

Panasonic

Panasonic Viera TH-37PV70EYA Bedienungsanleitung

Panasonic

Panasonic Viera TC-60PS34 Bedienungsanleitung

Panasonic

Panasonic Viera TX-P60ZT65B Bedienungsanleitung

Panasonic

Panasonic TH37PX50U - 37" HD PLASMA TV Einrichtungshandbuch

Panasonic

Panasonic Viera TH-58PE75U Bedienungsanleitung

Panasonic

Panasonic TXP42VT20E Bedienungsanleitung

Panasonic

Panasonic TH-42PX80U Bedienungsanleitung

Panasonic

Panasonic TH-50PV600AZ Bedienungsanleitung

Panasonic

Panasonic Viera TC-L32X2 Bedienungsanleitung

Panasonic

Panasonic TH-50PV80D Bedienungsanleitung

Panasonic

Panasonic Viera TH-M50HD18 Bedienungsanleitung

Panasonic

Panasonic VIERA TH-42PZ700A Bedienungsanleitung

Panasonic

Panasonic TH-P42VT30R Bedienungsanleitung

Beliebte Plasma-TV Handbücher anderer Marken

Hitachi

Hitachi 50PD9800TA Bedienungsanleitung

LG 60PA5500 Bedienungsanleitung

Sony

Sony WEGA KE-P42M1 Bedienungsanleitung

VESTEL

VESTEL PL2000 Bedienungsanleitung

VisionQuest

VisionQuest PVQ-32VGB Bedienungsanleitung

Maxent

Maxent MX-5020HPM Bedienungsanleitung

LG 50PK550 Bedienungsanleitung

LG PJ550N Bedienungsanleitung

Samsung

Samsung PA43H4000 Bedienungsanleitung

LG 42LG70ER Bedienungsanleitung

Samsung

Samsung 7+ series Bedienungsanleitung

LG DU-42PZ60H Bedienungsanleitung

Nexus

Nexus NX422 Bedienungsanleitung

JVC

JVC AV42PD20ES Bedienungsanleitung

Samsung

Samsung PS42A466P2M Bedienungsanleitung

Samsung

Samsung PL42E7SX/RCL Bedienungsanleitung

Samsung

Samsung PS-42D4S Kurzanleitung

Samsung

Samsung PS43F4900 Bedienungsanleitung