Panasonic PT-4743 Bedienungsanleitung

HDTV Projection Monitor

Operating Instructions

Monitor de proyección de HDTV

Instrucciones de Operación

Téléprojecteur haute définition

Manuel d’utilisation

TQB2AA0470-1 30407

PRINTED IN USA

IMPRESO EN EE.UU

IMPRIMÉ AUX ÉTATS-UNIS

PT-56TW53

PT-53TW53

PT-56WX53

PT-53WX53

PT-47WX53

PT-47WXC43

PT-47WX33

PT-4743

ENGLISH

ANY CHANGES OR MODIFICATIONS TO THIS PTV

RECEIVER NOT EXPRESSLY APPROVED BY

MATSUSHITA ELECTRIC CORPORATION OF AMERICA

COULD CAUSE HARMFUL INTERFERENCE, WHICH

WOULD VOID THE USER’S AUTHORITY TO OPERATE

THIS EQUIPMENT.

FCC CAUTION:

THIS PRODUCT UTILIZES CATHODE RAY TUBES (CRT) AND OTHER

COMPONENTS THAT CONTAIN LEAD. DISPOSAL OF THESE MATERIALS

MAY BE REGULATED IN YOUR COMMUNITY DUE TO ENVIRONMENTAL

CONSIDERATIONS. FOR DISPOSAL OR RECYCLING INFORMATION

PLEASE CONTACT YOUR LOCAL AUTHORITIES, OR THE ELECTRONICS

INDUSTRIES ALLIANCE: <HTTP://WWW.EIAE.ORG.>

ENVIRONMENTAL NOTICE:

Read these instructions completely before operating television.

Contents are subject to change without notice or obligation.

Unauthorized copying and distribution is a violation of law.

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866,

5510752 and 5736897. BBE and BBE symbol are registered

trademarks of BBE Sound, Inc.

High Definition Sound

WARNING: To reduce the risk of electric shock do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

The exclamation point within a

triangle is intended to tell the

user that important operating

and servicing instructions are in

the papers with the appliance.

The lightning flash with arrow

head within a triangle is

intended to tell the user that

parts inside the product are a

risk of electric shock to persons.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture and objects filled with liquids, such as vases,

should not be placed on this apparatus.

The Energy Star label, a symbol for energy efficiency, was created by the U.S.

Environmental Protection Agency (EPA) and the U.S. Department of Energy

(DOE) to help customers identify products that can save them money and protect

the environment by saving energy. Energy Star compliant products generally

consume less energy than similar standard products.

The Class II insulation symbol (square within a square) indicates

that this product has been evaluated and tested to comply with

Class II insulation requirements.

new2prod 0470-1 E doc2.fm Page 0 Friday, May 2, 2003 12:31 PM

IMPORTANTINFORMATION

ENGLISH

Important Information

Information Regarding Convergence

In the projection television, the image is formed by

projecting 3 different color images (red, green and blue)

onto the projection screen. Convergence refers to the

alignment of red, green and blue images on the

projection screen. When these images are properly

aligned (converged), you see a sharp and vibrant color

image. Sometimes, the three images may require

alignment. This is due to the effect of earth’s magnetic field

on the projection tubes. Normally, adjustment is not

necessary after the initial alignment at the center of the

screen. It is possible to correct the color fringing on other

areas of the screen by using the buttons on the remote

control and by following the on-screen instructions in the

set-up menu. Please converge the images before using the

television for the first time. The following diagram shows

examples of a misaligned image and a properly aligned

image. Please refer to pages 26 and 27 for detailed

procedure on how to adjust convergence.

Notes:

•Make sure that the set is on for at least 20 minutes

before adjusting convergence as described on pages 26

and 27.

•Convergence adjustment is independent for each format

(480i, 1080i or zoom). Setting in one format does not

affect the other.

Important Information Regarding The Use Of

Video Games, Computers, Or Other Fixed

Image Displays.

FCC INFORMATION

This equipment has been tested and found to comply with

the limit for a Class B Digital Device in accordance with the

specifications in Part 15 of the FCC Rules. The limits are

designed to provide reasonable protection against radio

and television interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications, However, there is no

guarantee that interference will not occur in a particular

installation.

If this equipment does cause interference to radio or

television reception (which you can determine by turning

the equipment off and on), try to correct the interference by

one or more of the following measures.

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the

receiver.

•Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV

technician for help.

Misconverged image

Properly aligned image

WARNING: The marking or retained image on the

picture tube resulting from viewing fixed image is

not an operating defect and as such is not covered

by Warranty.

The projection television is designed to display

constantly moving images on the screen. Continuous

viewing of stationary images such as letterbox pictures

on standard screen TVs (with top/bottom bars), non-

expanded standard (4:3) pictures on wide screen TVs

(with side bars shown on each side of an image), stock

market report bars (ticker running at the bottom of the

screen), video game patterns, fixed scoreboards,

bright station logos, on-line (Internet) or repetitive

computer style patterns should be limited.

The extended use of fixed image program material can

cause a permanent picture tube damage, shown as a

“shadow image” viewable on normal programs. This

type of irreversible picture tube deterioration can be

limited by performing the following steps:

•Limit the display of fixed image program material to

no more than 15% of total viewing time per week.

•Turn the power off when not in use.

new2prod 0470-1 E doc2.fm Page 1 Friday, May 2, 2003 12:31 PM

TABLEOFCONTENTS

ENGLISH

Table of Contents

Important Information .....................................1

Information Regarding Convergence.......................... 1

Information Regarding The Use Of Video Games

Computers, Or Other Fixed Image Displays............ 1

Congratulations ...............................................3

Customer Record........................................................ 3

Care and Cleaning...................................................... 3

Specifications.............................................................. 3

Feature Chart.............................................................. 3

Installation........................................................4

Television Location ..................................................... 4

Optional Cable Connections ....................................... 4

AC Power Supply Cord............................................... 4

Cable / Antenna Connection....................................... 4

Auto Set Up Menu ...................................................... 4

Optional Equipment Connections..................5

VCR ............................................................................ 5

Cable Box................................................................... 5

VCR and Cable Box.................................................... 5

Amplifier (TO AUDIO AMP)........................................ 6

Digital TV - Set-Top Box (DTV-STB) or DVD Players 6

Front Control Panel..................................................... 6

DVI (Digital Visual Interface) input connection ........... 7

Special Remote Buttons ............................................. 7

PIP And Split Operation ..................................8

PIP Operation ............................................................ 8

Split Operation ........................................................... 8

PIP and Split Operation With a Cable Box ................ 8

PIP And Split Operational Buttons.................8

TV/Video Button.......................................................... 8

Search Button............................................................. 8

Move Button ............................................................... 9

PIP MIN and PIP MAX Buttons .................................. 9

Freeze Button............................................................. 9

Main Picture Freeze Feature...................................... 9

PIP, Split and Freeze Mode Buttons

Operational Chart .................................................... 9

Remote Control Operation

(models PT-47WXC43 and PT-47WX33).................... 10

Battery Installation...................................................... 10

Operating Components with Remote Control............. 11

Programming the Remote.......................................... 12

Programming Without a Code.................................... 12

Component Codes ..................................................... 12

Remote Control Operation

(models PT-47/53/56WX53, PT-53/56TW53 and PT-4743)... 14

Battery Installation...................................................... 14

Operating Components with Remote Control............. 15

Programming the Remote.......................................... 17

Programming Without a Code.................................... 17

Component Codes ..................................................... 17

Basic Menu Navigation................................. 20

Icon Menus Operation.................................. 21

Picture........................................................................ 21

Audio .......................................................................... 21

Channels .................................................................... 22

Timer .......................................................................... 22

Lock............................................................................ 23

Set Up ........................................................................ 26

Troubleshooting Chart ................................. 28

Index............................................................... 29

Note: The warranty and service center information is located in the back of this manual.

new2prod 0470-1 E doc2.fm Page 2 Friday, May 2, 2003 12:31 PM

CONGRATULATIONS

ENGLISH

Congratulations

Your new Projection Television (PTV) features state-of-the-

art technology for high quality picture and sound with

complete audio/video connections for your home theater

system. Your PTV is designed to give you many years of

enjoyment. It was thoroughly tested and tuned at the

factory for best performance.

Customer Record

The model and serial number of this product are located on

the back of the TV. You should note the model and serial

number in the space provided and retain as a permanent

record of your purchase. This will aid in identification in the

event of theft or loss. Product registration for U.S. customers

is available at: www.prodreg.com/panasonic.

Model

Number

Serial

Number

Care and Cleaning

Projection Screen (Turn PTV Off)

The projection screen is a high precision lens system which

has a protective screen. The protective screen is fully

washable with the following precautions:

•Use a mild soap solution or window cleaner and a clean

cloth.

•DO NOT USE ABRASIVE CLEANERS.

•Do not use laundry detergent or automatic dishwasher

soap.

•Do not use alcohol, ammonia, or petroleum based

products.

•Avoid excessive moisture and wipe dry.

•Prevent solution from running into the receiver below.

•Avoid bumping or scraping the screen.

Note: Do not spray any type of cleaning fluid directly on the

screen.

Cabinet and Remote Control

•For cabinets and remote control, use a soft cloth

dampened with water or a mild detergent solution. Avoid

excessive moisture and wipe dry.

•Do not use benzene, thinner or other petroleum based

products.

Specifications

Specifications are subject to change without notice or

obligation.

Feature Chart

* For models PT-47WXC43 and PT-4743 the protective screen is

packed separately.

Power Source

PT-53WX53 (4.2A)

PT-56WX53 (4.2A)

PT-53TW53 (4.2A)

PT-56TW53 (4.2A)

PT-47WX53 (4.2A)

PT-47WXC43 (4.2A)

PT-47WX33 (4.2A)

PT-4743 (4.2A)

120V AC, 60Hz

Channel Capability - 181 VHF-12; UHF-56; Cable-113

Video Input Jacks 1Vp-p, 75 Ohm, Phono Jack Type

Audio Input Jacks 500mV RMS 47K Ohm

Video out jack 1Vp-p, 75 Ohm, Phono Jack Type

Audio Output Jacks 0-2.0V RMS 4.7K Ohm

DVI Input jack 1.0 compatible

Component Input (Y / PB/ PR)75 Ohm, Phono Jack Type

S-Video Input Jacks S-Video (Y-C) Connector

MODELS

PT-53TW53

PT-56TW53

PT-53WX53

PT-56WX53

PT-47WX53

*PT-47WXC43

*PT-4743

PT-47WX33

FEATURES

MENU LANGUAGE ENG/

SPAN/FR •••••

*PROTECTIVE SCREEN ••••

2 TUNER PIP •••••

2RF •••••

CLOSED CAPTIONING •••••

V-CHIP CAPABILITY •••••

DIGITAL SCAN RATE 1080i,

480p 1080i,

480p

NTSC LINE-DOUBLER 480p 480p 480p 480p 480p

VIDEO NORM •••••

AUDIO NORM •••••

STEREO •••••

AI SOUND •••••

BASS/BALANCE/TREBLE •••••

SURROUND •••••

BBE VIVA 3D •

BBE •••••

A/V IN (REAR/FRONT) 4

(3/1) 4

(3/1)

AUDIO OUT •••••

DVI INPUT •••••

S-VHS INPUT •••••

COMPONENT INPUT •••••

new2prod 0470-1 E doc2.fm Page 3 Friday, May 2, 2003 12:31 PM

INSTALLATION

ENGLISH

Installation

Television Location

This unit can be used as part of an entertainment center. Consult

your dealer for available options.

•Avoid excessive sunlight or bright lights, including

reflections.

•Keep away from excessive heat or moisture. Inadequate

ventilation may cause internal component failure.

•Fluorescent lighting may reduce remote control

transmitting range.

•Keep away from magnetic equipment, including motors,

fans and external speakers.

Optional Cable Connections

Shielded audio and video cables should be used between

components. For best results:

•Use 75-ohm coaxial shielded cables.

•Use appropriate input and output connectors, that match

your component connectors.

•Avoid long cables to minimize interference.

AC Power Supply Cord

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT

OF AC OUTLET AND FULLY INSERT. DO NOT

USE A PLUG WITH A RECEPTACLE OR OTHER

OUTLET UNLESS THE BLADE CAN BE FULLY INSERTED TO

PREVENT BLADE EXPOSURE.

PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED

OVER, CRIMPED, BENT, OR PINCHED, PARTICULARLY AT PLUGS,

CONVENIENCE RECEPTACLES, AND THE POINT WHERE THEY EXIT

FROM THE APPARATUS.

Cable / Antenna Connection

For proper reception, either a cable or antenna connection

is required.

Cable Connection

Connect the cable supplied by your local

cablecompany to ANT1 connection on

back of television. Select cable mode and

ANT1 in SET UP menu under Prog Chan

(Program Channels).

Note: A cable converter box may be

required for proper reception.

Check with your local cable company for compatibility

requirements.

Antenna Connection

•For proper reception of VHF/UHF channels, an

external antenna is required. For best reception an

outdoor antenna is recommended.

•Connect home antenna to

ANT1 connection on back of

television. Select TV mode

and ANT1 in the SET UP

menu under Prog Chan.

Note: Cable Mode is preset at the

factory. Antenna users must

change to TV Mode and ANT 1 in the Set Upmenu.

Auto Set Up Menu

For your convenience, Auto Set up menu will be displayed

on screen when the set is turned on for the first time. If

needed, follow the menus and procedures for setting up the

features.

IDIOMA/LANGUE

To change menu language to ENGLISH, SPANISH or

FRENCH.

Procedure

•Press VOL uto select English, Spanish or French.

MODE

To select TV (antenna) or CABLE mode depending on the

signal source.

Procedure

•Press VOL uto select TV or CABLE.

AUTO PROGRAM

To automatically program all channels with a signal.

Procedure

•Press VOL uto start Auto Programming.

CONVERGENCE

To adjust the center convergence, if needed.

Procedure

•Press VOL uto display center Convergence adjustment

menu.

•Refer to page 27 for setting Convergence, if needed.

Polarized plug

75 Ohm VHF/UHF

on back of TV

Incoming Cable from

Cable Company

Incoming Cable from

Home Antenna

new2prod 0470-1 E doc2.fm Page 4 Friday, May 2, 2003 12:31 PM

237,21$/(48,30(17&211(&7,216

l

(1*/,6+

2SWLRQDO(TXLSPHQW&RQQHFWLRQV

1RWH 7KHUHPRWHFRQWUROPXVWEHSURJUDPPHGZLWKVXSSOLHG

FRGHVWRRSHUDWHWKHRSWLRQDOHTXLSPHQW

9&5&RQQHFWLRQ

)ROORZ WKLV GLDJUDP ZKHQ FRQQHFWLQJ \RXU WHOHYLVLRQ WR D

9&5RQO\

9LHZLQJDWHOHYLVLRQSURJUDP

3URFHGXUH

 6HOHFW$17LQWKH6(783PHQX

 7XQHWKHWHOHYLVLRQWRWKHSURJUDP\RXZDQWWRYLHZ

9LHZLQJDYLGHR

3URFHGXUH

r2SWLRQ$

 6HOHFW$17LQWKH6(783PHQX

3UHVVWKH799,'(2 EXWWRQ RQ WKH UHPRWH FRQWURO WR

VHOHFWWKHYLGHRLQSXW9,'(29,'(2HWF

FRQQHFWHGWR\RXU9&5

 %HJLQWKHYLGHR

r2SWLRQ%

 6HOHFW$17LQWKH6(783PHQXXQGHU3URJ&KDQ

 7XQHWKHWHOHYLVLRQWR&KDQQHORUGHSHQGLQJRQ\RXU

9&5

 %HJLQWKHYLGHR

5HFRUGLQJDWHOHYLVLRQSURJUDP

3URFHGXUH

r2SWLRQ$5HFRUGLQJDQGYLHZLQJWKHVDPHSURJUDP

 6HOHFW$17LQWKH6(783PHQX

 7XQHWKHWHOHYLVLRQWR&KDQQHORUGHSHQGLQJRQ\RXU

9&5

 8VLQJWKH9&5WXQHWRWKHWHOHYLVLRQSURJUDP\RXZDQW

WRUHFRUG

 %HJLQUHFRUGLQJ

r2SWLRQ % 5HFRUGLQJ RQH SURJUDP ZKLOH YLHZLQJ DQRWKHU

SURJUDP

 6HOHFW$17LQWKH6(783PHQX

3UHVVWKH799,'(2 EXWWRQ RQ WKH UHPRWH FRQWURO WR

VHOHFW WKH YLGHR LQSXW 9,'(2  9,'(2  HWF

FRQQHFWHGWR\RXU9&5

 8VLQJWKH9&5WXQHWRWKHWHOHYLVLRQSURJUDP\RXZDQW

WRUHFRUG

 %HJLQUHFRUGLQJ

3UHVVWKH799,'(2 EXWWRQ RQ WKH UHPRWH FRQWURO WR

VZLWFKEDFNWR79PRGH

 7XQHWKHWHOHYLVLRQWRWKHSURJUDP\RXZDQWWRYLHZ

&DEOH%R[&RQQHFWLRQ

)ROORZ WKLV GLDJUDP ZKHQ FRQQHFWLQJ \RXU WHOHYLVLRQ WR D

FDEOHER[RQO\

9LHZLQJDSUHPLXPVFUDPEOHGFDEOHFKDQQHO

3URFHGXUH

 6HOHFW$17LQWKH6(783PHQX

 7XQHWKHWHOHYLVLRQWR&KDQQHO

 8VLQJWKHFDEOHER[WXQHWRWKHSUHPLXPFDEOHFKDQQHO

\RXZDQWWRYLHZ

1RWH 7RXVHVSHFLDOIHDWXUHVVXFKDV)DYRULWH&KDQQHOVDQG

&KDQQHO &DSWLRQV  $17 PXVW EH VHOHFWHGLQ WKH6(7

83PHQX

9&5DQG&DEOH%R[&RQQHFWLRQ

)ROORZ WKLV GLDJUDP ZKHQ FRQQHFWLQJ \RXU WHOHYLVLRQ WR

ERWKD9&5DQGDFDEOHER[

9LHZLQJDSUHPLXPVFUDPEOHGFDEOHFKDQQHO

3URFHGXUH

 6HOHFW$17LQWKH6(783PHQX

 7XQHWKHWHOHYLVLRQWR&KDQQHO

 8VLQJWKHFDEOHER[WXQHWRWKHSUHPLXPFDEOHFKDQQHO

\RXZDQWWRYLHZ

1RWH 7RXVHVSHFLDOIHDWXUHVVXFKDV)DYRULWH&KDQQHOVDQG

&KDQQHO &DSWLRQV  $17 PXVW EH VHOHFWHGLQ WKH6(7

83PHQX

VIDEO

VIDEO OUT

AUDIO OUT

ANT OUT ANT IN

PLAY

STOP

WFF

VCR

Incoming

Cable

CABLES NOT SUPPLIED

S-VIDEO

COMPONENT

VIDEO INPUT

VIDEO

INPUT

PROG

OUT

TO AUDIO

AMP

AUDIO

VIDEO

AUDIO

DIGITAL

TERMINALS ON BACK OF PROJECTION TELEVISION

ANT 1

SPLIT OUT

ANT 2

ANT OUT

ANT IN

PLAY

STOP

CABLE BOX

Incoming

Cable

CABLES NOT SUPPLIED

S-VIDEO

COMPONENT

VIDEO INPUT

VIDEO

INPUT

PROG

OUT

TO AUDIO

AMP

AUDIO

VIDEO

AUDIO

DIGITAL

TERMINALS ON BACK OF PROJECTION TELEVISION

ANT 1

SPLIT OUT

ANT 2

VIDEO

VIDEO OUT

AUDIO OUT

ANT IN ANT OUT

PLAY

STOP

WFF

VCR

Incoming

Cable

CABLES NOT SUPPLIED

PLAY

STOP

CABLE BOX

ANT IN

ANT OUT

ANT 1

SPLIT OUT

ANT 2

S-VIDEO

COMPONENT

VIDEO INPUT

VIDEO

INPUT

PROG

OUT

TO AUDIO

AMP

AUDIO

VIDEO

AUDIO

DIGITAL

TERMINALS ON BACK OF PROJECTION TELEVISION

PT51HX43 0472E 050803.fm Page 5 Thursday, May 8, 2003 3:20 PM

OPTIONALEQUIPMENTCONNECTIONS

ENGLISH

Optional Equipment Connections (cont.)

VCR and Cable Box Connection (Cont.)

Recording a premium (scrambled) cable channel

Procedure

•Select ANT2 in the SET UP menu under Prog Chan.

•Press the TV/VIDEO button on the remote control to

select the video input (VIDEO 1, VIDEO 2, etc.)

connected to your VCR.

•Turn the VCR ON.

•Tune the VCR to Channel 3 or 4, depending on the

switch setting on the back of VCR.

•Using your cable box, tune to the premium cable channel

you want to record.

•Begin recording.

rTo view a different channel while recording:

•Select ANT1 in the SET UP menu under Prog Chan.

•Press the TV/VIDEO button on the remote control to TV

mode.

•Tune the television to a program (except another

premium cable channel).

Amplifier Connection (TO AUDIO AMP)

To listen through a separate stereo system, connect an

external audio amplifier TO AUDIO AMP outputs on back of

television.

Note: TO AUDIO AMP terminals cannot be connected directly

to externalspeakers.

Audio Adjustments

•Select SPEAKERS ON located in the onscreen AUDIO

menu.

•Set amplifier volume to minimum.

•Adjust television volume to desired level.

•Adjust amplifier volume to match the television.

•Select SPEAKERS OFF & VARIABLE AUDIO OUT from

AUDIO menu.

•Volume, mute, bass, treble and balance are now

controlled through the television.

Note: Select SPEAKERS OFF & FIXED AUDIO OUT to control

audio functions through the external amplifier.

Digital TV - Set-Top Box (DTV-STB) or DVD

Connection

This television is capable of displaying 1080i and 480p DTV

signals when connected to a DTV tuner set-top-box (STB). In

order to view DTV programming, the STV must be connected

to the component video inputs (Y,PB,PR) of the television. A

DTV signal must be available in your area. Select the output of

the STB to either 1080i or 480p.

This television also utilizes a progressive scan doubler, which

de-interlaces the NTSC signal and progressively scans the

image. This allows you to sit close to the TV and not see the

thin black horizontal lines (venetian blind effect) associated

with interlaced TV pictures.

Use this diagram to connect the DTV-STB or DVD player to

the back of your projection television.

Note: There are two set of three video iacks, Y, PB, and PR.

Separate component color inputs provide luminance and

color separation. Use the L (left) and R (right) audio

inputs.

Front Control Panel

The front control panel can be used to access menus and

switch video mode when the remote control is not available.

A second VCR, Camcorder, a video disc player, video game

equipment or DSS equipment can also be connected to the

video inputs. See the optional equipment manual for details.

Procedure

•Connect equipment to front Audio/Video input jacks.

•Press TV/VIDEO button to select VIDEO 4 input mode.

•Operate optional equipment as instructed in equipment

manual.

The ON/OFF indicator LED (red) will be lit when set is on.

Video 4 location for PT-53/56TW53

new2prod 0470-1 E doc2.fm Page 6 Friday, May 2, 2003 12:31 PM

OPTIONALEQUIPMENTCONNECTIONS

ENGLISH

Optional Equipment Connections (cont.)

DVI (Digital Visual Interface) input connection

The DVI/HDCP1input on your PTV can accommodate

copy protected digital programming. The DVI/HDCP input

terminal complies with the EIA-861Profiles2standard and is

not intended for use with personal computers. The DVI/

HDCP input can be connected to an EIA/CEA 861

compliant consumer electronic device, such as a set top

box or DVD player equipped with a DVI output connection3.

The DVI/HDCP input is designed for best performance with

HDTV signals, such as 1080i or 720p picture signals. The

DVI/HDCP input will also accept and display 480i and 480p

picture signals.

Notes:

1. DVI/HDCP = Digital Visual Interface / High-Bandwith

Digital Copy Protection.

2. EIA/CEA-861 Profiles compliance covers profiles for

transmission of uncompressed digital video including

high bandwidth digital content protection.

3. Consult your consumer electronics dealer for availability

details.

Follow the diagram below to connect the PTV to a set top

box or a DVD player.

Procedure

•Press TV/VIDEO button on the remote control to select

DIGITAL-IN input.

•Connect the DVI output from the set top box or a DVD

player to the DIGITAL IN input on the back of the PTV.

•Connect the Audio Out signal from the set top box or

DVD player to the L and R Audio inputs associated with

the DIGITAL IN input.

Special Remote Buttons

ASPECT Button

The ASPECT button on the remote control lets you choose

one of four display modes, depending on the formats of the

received signal and your preferences..

BBE Button

Press this button to turn BBE VIVA 3D (available on PT-53TW53

and PT-56TW53 only) or BBE sound featureOnor Off.

SAP Button

Press this button to let you cycle through different audio modes. If

you are receiving a stereo program and you press this button, you

can cycle between STEREO and MONO.

Customer Options depending on Component Input Signal

INPUT

SIGNAL DISPLAY ON SCREEN ASPECT BUTTON

OPTIONS

1080i 16:9 only No options

480p (16:9) Default to 16:9 4:3, Full or Zoom (see

below)

480p (4:3) Default to FULL mode.

Note: Will stretch picture

horizontally.. 4:3, Full or Zoom (see

below)

480i Default to JUST mode 4:3, Full, Just or

Zoom (see below)

This will display a 4:3 picture

at its standard 4:3 size with

gray side bars. (Not

recommended for viewing

4:3 pictures as it may create

a permanent image on

screen if displayed for a

prolonged period of time.)

This will expand the 4:3

picture uniformly (width and

height) to full screen width

and then reposition the

picture vertically.

(Recommended for letterbox

pictures.)

This will show picture at full

screen size. (Recommended

for anamorphic pictures.)

This will stretch the right and

left edges of a 4:3 picture to

fill the screen, The center of

the screen will have aspect

correction appliled. The size

of the picture will depend on

the original signal.

(Recommended for regular

TV viewing.)

Note: If menu is displayed while in Zoom mode, the aspect

will change to Full to display complete menu.

new2prod 0470-1 E doc2.fm Page 7 Friday, May 2, 2003 12:31 PM

PICTUREINPICTUREAND SPLITOPERATION

ENGLISH

Picture In Picture and Split Operation

Note: The shapes of PIP and SPLIT function buttons may vary

depending on the remote control.

PIP Operation

This television includes a two-tuner Picture In Picture (PIP)

feature. This allows you to watch two (2) live broadcasts at

the same time with or without an external video source

such as a VCR, cable box, etc.

Procedure

•Connect incoming cable to ANT 1 input on back of TV.

•Press to display PIP frame.

•Select channels for the PIP frame by pressing

•Select channels for the Main picture by pressing

or use the remote control numeric keypad.

•Press to switch the PIP and MAIN PICTURE

source.

•Press to view picture source status.

•Press to cancel PIP frame.

Split Operation

This feature lets you watch two different channels side by

side with or without an external video source.

Procedure

•Press to display Split screen.

•Select channels for the Split by pressing .

•Select channels for the Main picture by pressing

or use the remote control numeric keypad.

•Press to switch the SPLIT SCREEN and MAIN

PICTURE source.

•Press to view picture source status.

•Press to cancel Split screen.

PIP and Split Operation With a Cable Box

To view premium (scrambled) cable channels through your

cable box in the Main Picture:

Note: Use this procedure if you want to watch premium cable

channels in the Main Picture while viewing a television

program or video in the PIP or Split frame.

Procedure

•Select ANT 2 in the SET UP menu under Prog Chan

(Program Channels).

•Tune TV to Channel 3.

•Press or on the remote control to display

the PIP or Split frame.

Note: Audio is from the Main Picture only.

•Verify the Cable box is ON.

•Choose channels for the Main Picture by tuning the

cable box.

•Choose channels for the PIP frame by pressing

Note: Swap is not available when using the cable box to tune

channels. If your cable box has video output, it can be

connected to the TV to allow you to use all PIP functions.

See the equipment manual for more information.

PIP and Split Operational Buttons

TV/VIDEO Button

Press when PIP or Split frame is displayed to select

desired input mode.

Search Button (PIP and Split)

This feature lets you scan through all available channels.

Procedure

•Press or to display PIP or Split frame.

PIP

PIP CH

SWA

RECALL

PIP

Note: Audio is from Main Picture only.

Main Picture

PIP Frame

SPLIT

PIP CH

SWA

RECALL

SPLIT

PIP

SPLIT

PIP CH

PIP Frame

Main Picture

CH # COMPONENT1 COMPONENT2

DIGITAL-IN

VIDEO 1/2/3/4

Main Picture

CH #

SPLIT Frame

COMPONENT1 COMPONENT2

DIGITAL-IN

VIDEO 1/2/3/4

PIP

SPLIT

new2prod 0470-1 E doc2.fm Page 8 Friday, May 2, 2003 12:31 PM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Projektionsfernsehen Handbücher

Panasonic

Panasonic TX-51P100 series Bedienungsanleitung

Panasonic

Panasonic TC-47P500 Series Bedienungsanleitung

Panasonic

Panasonic PT-51DX80V Bedienungsanleitung

Panasonic

Panasonic PT53X54J - 53" PROJECTION TV HD Bedienungsanleitung

Panasonic

Panasonic PT-50LCZ70 - 50" Rear Projection TV Bedienungsanleitung

Panasonic

Panasonic PT52DL10 - 52" DLP REAR PJ HDTV Bedienungsanleitung

Panasonic

Panasonic TC-43P400H Bedienungsanleitung

Panasonic

Panasonic PT-53TWD63 Bedienungsanleitung

Panasonic

Panasonic TX-43P400H Bedienungsanleitung

Panasonic

Panasonic TX-51P100 series Bedienungsanleitung

Panasonic

Panasonic TX-56P800H Bedienungsanleitung

Panasonic

Panasonic PT-61XF70 Bedienungsanleitung

Panasonic

Panasonic PT-51HX43 Bedienungsanleitung

Panasonic

Panasonic PT45LC12 - MULTI-MEDIA DISPLAY Bedienungsanleitung

Panasonic

Panasonic PT-52DL52 Bedienungsanleitung

Panasonic

Panasonic PT53X54 - 53" PROJECTION TV HD Bedienungsanleitung

Panasonic

Panasonic TX-47P600X Bedienungsanleitung

Panasonic

Panasonic PT-61HX42 Operating Bedienungsanleitung

Panasonic

Panasonic TX-47P600H Bedienungsanleitung

Panasonic

Panasonic PT-56WXF95 Bedienungsanleitung

Panasonic

Panasonic PT-56WXF95 Bedienungsanleitung

Panasonic

Panasonic PT-51G46C Bedienungsanleitung

Panasonic

Panasonic PT56WXF90W - DIGITAL PTV MONITOR Bedienungsanleitung

Panasonic

Panasonic PT-61HX41 Bedienungsanleitung

Beliebte Projektionsfernsehen Handbücher anderer Marken

Samsung

Samsung ST-43T6P Bedienungsanleitung

Toshiba

Toshiba ColorStream TP50G60 Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric WD-65734 Bedienungsanleitung

Optoma

Optoma EP652A Bedienungsanleitung

Samsung

Samsung SP43T8HPX/XEC Bedienungsanleitung

Philips

Philips 28PW6006 - annexe 1 Bedienungsanleitung

Sony

Sony KP-57WS500 - 57" Hi-scan 1080i™ 16:9 Projection... Benutzerhandbuch

Philips

Philips 43PP8421 Bedienungsanleitung

Hitachi

Hitachi 51F510 Bedienungsanleitung

RCA

RCA P52950 Bedienungsanleitung

Sony

Sony KP-51DS1U Bedienungsanleitung

Magnavox

Magnavox 51MP392H - 51" Widescreen Hd Ready Tv Bedienungsanleitung

Hitachi

Hitachi 46F510 Bedienungsanleitung

Pioneer

Pioneer Elite PRO 510HD Bedienungsanleitung

Philips

Philips 43PP8421 Handbuch

JVC

JVC I'Art Pro AV-48P776 Bedienungsanleitung

Sony

Sony GRAND WEGA KDF-55XS955 Bedienungsanleitung

Sony

Sony KP-46WT520 - Wide Screen Projection Tv Bedienungsanleitung