Panasonic CZ-RTC6 Bedienungsanleitung

Panasonic Corporation

1006 Oaza Kadoma, Kadoma City, Osaka 571-8501, Japan

Operating Instructions

Wired Remote Controller

Model No. CZ-RTC6

CZ-RTC6W

English

Before operating the unit, read these Operating Instructions thoroughly and keep them for future reference.

Page

zSafety precautions.............................................3

zPart names..........................................................4

• Control panel / Top screen .......................................... 4

• Screen display............................................................. 5

• Operation guide........................................................... 5

zBasic operations ................................................6

zMenu list..............................................................9

zECONAVI function............................................10

znanoe™ X function ..........................................13

zFilter sign..........................................................15

zOuting function ................................................16

zTouch sound/Contrast/Backlight....................18

zLanguage/Display mode..................................19

zSetting information list....................................20

zTroubleshooting...............................................22

zSpecications...................................................24

WEB-ACXF55-26734-EN

F0620-60323

Installation Instructions

separately attached

2(EN)

Thank you for purchasing the Panasonic wired remote controller.

zRead the Operating Instructions carefully for safe use. This manual describes the

Operating Instructions of the wired remote controller. Read this manual as well as

operating instructions supplied with indoor units and outdoor units.

zBe sure to read the “Safety precautions” (P.3) before use.

zKeep this manual with operating instructions supplied with indoor units and outdoor

units in a safe place.

zBe sure to keep this manual in a place easily accessible by users. In the case of user

change, be sure to give this manual to the new user.

NOTICE

The English text is the original instructions. Other languages are translation of the

original instructions.

Note

zThis device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

zThis equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: To assure continued compliance, follow the attached installation

instructions. Any changes or modications not expressly approved by the party

responsible for compliance could void the user’s authority to operate this equipment.

(EN)

Safety precautions

WARNING CAUTION

This symbol refers to a hazard or unsafe

practice which can result in severe personal

injury or death.

This symbol refers to a hazard or unsafe

practice which can result in personal injury or

product or property damage.

Matters to be observed Prohibited matters

WARNING

Do not use this appliance in a potentially explosive atmosphere.

In case of malfunction of this appliance, do not repair by yourself.

Contact the sales or service dealer for repair and disposal.

In case of emergency, remove the power plug from the

socket or switch off the circuit breaker or the means by

which the system is isolated from the mains power.

CAUTION

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning

use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not

play with the appliance.

This appliance can be used by children aged from 8 years

and above and persons with reduced physical, sensory or

mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by

children without supervision.

●Do not operate with wet hands.

●Do not wash with water.

4(EN)

Part names

Start/Stop

button

Starts/Stops

operation.

Enter button

Fixes the selected content.

Up/Down buttons

Selects an item.

Operation

mode

Setting information icon

•

Only the partial settings can be checked on the

top screen. To check all the settings (P.20)

• You can limit the number of icons to be

displayed to simplify the display. (P.19)

Setting information icons displayed

on the top screen

• Icon details (P.21)

Control panel / Top screen

Note

Press centre No glove No pen

• If no operation is performed for an extended period, the backlight turns off to save electricity.

(Press any button for illumination.)

Menu button

• When pressed

repeatedly during

operation, this shows

operating status

conrmation, set temperature,

operation mode, fan speed, ap,

and the menu screen. (P.6)

• When pressed while stopped, the

menu screen is displayed. (P.8)

Under operation

of nanoe™ X

LCD screen

Check the current

operating status

(P.6)

Set temperature

Appears when ECONAVI is being set to ON. (ECONAVI settings are possible only when tted

with ECONAVI panel/ECONAVI sensor.)

The control panel colour of CZ-RTC6W is white.

(EN)

Part names

Screen display

Internal cleaning in process Internal drying in process

zTo stop the

internal cleaning

operation

Press .

zTo resume

operation

Press .

zTo stop the

internal drying

operation

Press .

zTo resume

operation

Press .

Key operations locked Prohibited

Keys are locked so

operations are not

possible.

zTo return to the

top screen

Press .

Being centrally

controlled, operation

is not possible.

zTo return to the

top screen

Press .

Operation stop screen When inspection is required

Refer to

“Troubleshooting”

(P.22).

Operation guide

The currently operable content is

displayed.

• : Menu button

• : Enter button

6(EN)

Basic operations

1Start operation.

Press .

• Pressing after recovery from mains

power failure will resume operation with

the contents before mains power failure

has occurred.

• It is possible to set the screen in Step 2

as the top screen when starting operation.

(P.19 “Display mode”)

In that case, skip Step 2 below.

To stop operation

Press .

2Check the current operating status.

Press .

• When no operation is performed for

several seconds, the display returns to the

top screen.

Set

temperature

Fan speed

Flap

Operation

mode

3Select the item to set.

Press .

(Repeat)

• When no operation is performed for

several seconds, the display returns to the

top screen.

• “SET TEMP.” (Set temperature) is not

displayed in Fan mode ( ).

SET TEMP.

MODE

FAN SPEED

FLAP

Top screen

Note

zFor models that cannot change the airow direction, “FLAP” is not displayed.

(EN)

Basic operations

Set temperature

4Change the setting. (0.5 °C steps)

Press → .

(Press to nish.)

• Cool/Dry : 18.0 °C to 30.0 °C

• Heat : 16.0 °C to 30.0 °C

• Auto : 17.0 °C to 27.0 °C

Operation mode (e.g. Cool, Heat, etc.)

4Change the setting.

Press → .

(Press to nish.)

• (Auto): The mode is automatically

switched to Cool or Heat to achieve the set

temperature.

• Operation modes that cannot be set are

not displayed.

(Heat)

(Cool)

(Dry)

(Fan)

(Auto)

Fan speed

4Change the setting.

Press → .

(Press to nish.)

• (Auto): Cannot be selected in Fan

mode.

• Depending on the model, selectable fan

speed may differ.

* *

(High)

(Low)

(Medium)

(Auto)

* Depending on the

model, either of the

displays appears.

8(EN)

Basic operations

Flap

4Change the setting.

Press → .

(Press to nish.)

: Swing

• Pressing during swing can

stop the ap at your preferred

position.

• The swing and airow direction on the

remote controller is not synchronised with

the ap movement.

• Depending on the type of indoor unit and

operation mode, Flap can be set in 3

levels.

• The ap display differs from the actual ap

angle.

4Select the menu item.

Press → .

To return to the top screen

Press .

•

See “Menu list” (P.9) for the menu items.

• When no operation is performed for

several minutes, the display returns to the

top screen.

• The menu screen can also be displayed if

you press while stopped.

(EN)

Menu list

1 ECONAVI* Turns the ECONAVI function ON/

OFF. P.10

2 nanoeX* Turns the nanoe™ X function ON/

OFF. P.13

3 Filter sign Resets the time to lter cleaning. P.15

4 Outing function

Prevents the room temperature

from rising too high (or dropping

too low) when no one is in the

room.

P.16

5 Touch sound Turns the operation sound ON/

OFF. P.18

6 Contrast Sets the screen contrast. P.18

7 Backlight Sets the backlight brightness of the

screen. P.18

8 Language Sets the display language. P.19

9 Display mode Changes the display of the top

screen. P.19

* Some menus cannot be used

if the function is not tted. If

unavailable menus are selected,

the display shown on the right

appears.

• If the menu operations are

locked, the display shown on

the right appears and the menu

cannot be used.

Number for the selected item

Total number of items

10 (EN)

ECONAVI function

This function is available by attaching an optional ECONAVI sensor.

The ECONAVI sensor detects human activity and conserves energy based on the

activity level.

WARNING

Do not use the ECONAVI function in a room with disabled persons or infants only. Due

to their limited motions, the ECONAVI sensor may judge no person is present, causing

the indoor unit to stop the operation.

Overview of the ECONAVI function

High activity • Cooling: Target temperature is the same as the set temperature.

• Heating: Target temperature is 1 °C lower than the set temperature.

Low activity

• Cooling: Target temperature is 1 °C higher than the set

temperature.

• Heating: Target temperature is the same as the set temperature.

No one in the room No one in the room for 20 minutes

• Cooling: Target temperature is 2 °C higher than the set

temperature.

• Heating: Target temperature is 2 °C lower than the set temperature.

No one in the room for 3 hours*

• When no one is in the room for approx. 3 hours* or more, the unit

operates in the specied Absence operation mode.

* This depends on the type of indoor unit.

• When the sensor

detects movements in

the room which has

been empty, it will

resume operation to

match with the activity

level.

Andere Handbücher für CZ-RTC6

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Fernbedienung Handbücher

Panasonic

Panasonic EUR511517 Bedienungsanleitung

Panasonic

Panasonic AK-HRP1015G Bedienungsanleitung

Panasonic

Panasonic EUR511110 Bedienungsanleitung

Panasonic

Panasonic CZ-RTC6BLW Bedienungsanleitung

Panasonic

Panasonic aw-rm50g Bedienungsanleitung

Panasonic

Panasonic CZ-RTC5A Bedienungsanleitung

Panasonic

Panasonic AK-HRP1000G Bedienungsanleitung

Panasonic

Panasonic RAK-P001 Betriebsanleitung

Panasonic

Panasonic CZ-RWSU1U Bedienungsanleitung

Panasonic

Panasonic TX-28DT4 Bedienungsanleitung

Panasonic

Panasonic EUR501450 Bedienungsanleitung

Panasonic

Panasonic Diga DMR-ES35V Bedienungsanleitung

Panasonic

Panasonic CZ-RWSK2 Bedienungsanleitung

Panasonic

Panasonic CZ-RWST2U Bedienungsanleitung

Panasonic

Panasonic DMW-RSL1 Bedienungsanleitung

Panasonic

Panasonic EUR511511 guide Bedienungsanleitung

Panasonic

Panasonic CZ-RELC2 Bedienungsanleitung

Panasonic

Panasonic WV-CU20 Bedienungsanleitung

Panasonic

Panasonic EUR511160 Bedienungsanleitung

Panasonic

Panasonic CZ-RTC6WBL Bedienungsanleitung

Panasonic

Panasonic EUR501371 Gebrauchs- und Wartungshandbuch

Panasonic

Panasonic WV-CB550 Bedienungsanleitung

Panasonic

Panasonic CZ-RTC6W Bedienungsanleitung

Panasonic

Panasonic EUR646494 Betriebsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

Multiplex

Multiplex PROFI TX 9 Bedienungsanleitung

One Remote

One Remote RMB4 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

EisSound

EisSound KBSOUND Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Conrad

Conrad FS20 TC6 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

RCA

RCA RCU1300 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung