Panasonic 3312F Bedienungsanleitung

Panasonic Electric Works Fire & Security Technology Europe AB

Jungmansgatan 12, SE-211 19 Malmö, Sweden

Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99

[email protected] • www.panasonic-fire-security.com

Fire alarm systems

Analog base

3312F / FL

•Common base for the different analog detectors

•Fast connectors

•Label holder recess

Common base

The analog base 3312F / FL is connected to

a COM loop. Analog heat, smoke and multi

detector types 33xx / 43xx can be plugged in

the base. (See Product Leaflet for the

detector type respectively, for type of base.)

Fast connectors

3312F has fast connectors (blue) for the

COM loop (in/out). 3312FL also has fast

connectors (grey) for an external indicator

(LED), e.g. 2218.

Label holder

A label holder could be mounted in the base

(in the label holder recess). The label holder

is intended for a label showing "zone-

address" or "technical number" information,

which can be read also when the detector is

plugged in the base.

Miscellaneous

The base has an address label (Al) where the

detector's COM loop address is to be

written.

Individual fault signal is obtained if wrong

type of detector (compared with the

programming) is plugged in the base or if

the detector is unplugged.

When a detector with a locking screw is

plugged in the base, the detector can be

locked in its base to prevent theft.

The position of the detector's built-in LED is

marked in the base for correct mounting

position of the base.

For more information regarding detector

types, connections, etc. see Planning

Instructions and connection diagrams for the

system respectively.

Product applications

Used for analog detectors in the systems

EBL512 / 128 / 1000 / 2000.

The base is intended for indoor use and in

dry premises.

All technical features and data are subject to changes without notice, resulting from continuous development and improvement.

Product Leaflet Date of issue Revision / Date of revision

MEW01119 2008-09-19

Type number

3312F Analog base with fast connectors (blue) for the COM loop.

3312FL Analog base with fast connectors (blue) for the COM loop and fast

connectors (grey) for one ext. LED (e.g. 2218).

3390 Label holder (100 holders per packet, excl. labels)

3391 Labels for 3390 (10 sheets à 132 labels)

SA Fast connector for COM loop (in/out)

SB Fast connector for COM loop (in/out)

Al Address Label

Lss Locking screw stopper (for detector

type 33xx and 430x respectively)

E- Fast connector for external LED

E+ Fast connector for external LED

NOTE! E- and E+ on 3312FL only.

The base is prepared for mechanical locking of the detector, when a detector with a locking

screw is plugged into the base. Connector wire ∅0.6 – 1.2 mm (approx. 0.28 – 1.13 mm2). If

wire ∅0.6 mm is used the release button may be pushed as the wire is pressed into the

connector. Analog detector types 33xx and 43xx can be plugged in the base 3312F / FL.

Technical data

Voltage (V DC)

Rated

allowed

normal

12-30

24 (COM loop voltage)

Current consumption at nom. volt.

from COM loop (mA)

quiescent (base only)

active (base only)

Depending on the type of detector that is plugged into the base.

Ext. LED connectors (3312FL only)

voltage (V)

max. current output (mA)

Depending on the detector plugged in the base. Normally:

Ambient temperature (°C)

Operating

storage

-10 to +50

-20 to +70

Ambient humidity (% RH) max. 95, non condensing

Ingress Protection rating (estimated) IP51

Size ∅x H (mm) 102 x 15

Weight 3312F / 3312FL (g) 41 / 47

Construction / Colour ABS / Grey (N8, Munsell colour code)

Approvals CE; Conforms with EN54-5 and -7 (when applicable)

102 mm

15 6.2

Lss (33xx)

73 mm

50 mm

IN OUT

Ext

LED

SBSA

E+E-

Lss (430x)

Connectors

E+ and E-

not on 3312F

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Rauchmelder Handbücher

Panasonic

Panasonic 6295 Bedienungsanleitung

Panasonic

Panasonic 1828 Bedienungsanleitung

Panasonic

Panasonic 4313 Bedienungsanleitung

Panasonic

Panasonic 4375 Bedienungsanleitung

Panasonic

Panasonic 2217 Bedienungsanleitung

Panasonic

Panasonic EBL512 G3 5000 Betriebsanleitung

Panasonic

Panasonic 3378 Bedienungsanleitung

Panasonic

Panasonic 6363 Bedienungsanleitung

Panasonic

Panasonic 3377 Bedienungsanleitung

Panasonic

Panasonic 6362 Bedienungsanleitung

Panasonic

Panasonic 4301 Bedienungsanleitung

Panasonic

Panasonic 4318 Bedienungsanleitung

Panasonic

Panasonic 1728 Bedienungsanleitung

Panasonic

Panasonic 3309 Bedienungsanleitung

Panasonic

Panasonic Units for Hazardous Betriebsanleitung

Panasonic

Panasonic EBL512 Bedienungsanleitung

Panasonic

Panasonic 3339 Bedienungsanleitung

Panasonic

Panasonic EBL512 Bedienungsanleitung

Panasonic

Panasonic 1740 Bedienungsanleitung

Panasonic

Panasonic EBL512 G3 5000 Bedienungsanleitung

Panasonic

Panasonic EBL128 Bedienungsanleitung

Panasonic

Panasonic 1735 Bedienungsanleitung

Panasonic

Panasonic EBL128 Technisches Handbuch

Panasonic

Panasonic 4300 Bedienungsanleitung

Beliebte Rauchmelder Handbücher anderer Marken

x-sense

x-sense SD19-W Bedienungsanleitung

BRK electronic

BRK electronic First Alert P1010 Bedienungsanleitung

FireAngel

FireAngel Thermoptek ST-622 Bedienungsanleitung

teko

teko Astra-42A Bedienungsanleitung

Safetec

Safetec SDS-2/6 Betriebsanleitung

Siemens

Siemens PE-11C Bedienungsanleitung

System Sensor

System Sensor DH500ACDC Bedienungsanleitung

Resolution Products

Resolution Products RE612 CryptiX Bedienungsanleitung

First Alert

First Alert PC900V Bedienungsanleitung

Eminent

Eminent EM6590 E-Domotica Bedienungsanleitung

Ei Electronics

Ei Electronics Ei Ei168RC Bedienungsanleitung

Carrier

Carrier Kidde Quell Q301 Bedienungsanleitung

VESDA

VESDA VLF-500 Bedienungsanleitung

ELRO

ELRO FS8110 Bedienungsanleitung

Heiman

Heiman SMOKI NS-626PHS Bedienungsanleitung

Regin

Regin SDD-S65 Bedienungsanleitung

Family Gard

Family Gard FG225 Bedienungsanleitung

Greystone

Greystone DSD120 Bedienungsanleitung