Panasonic SOUNDSLAYER SC-GNW10 Bedienungsanleitung

until

2023/10/10

SC-GNW10

Owner’s Manual

Wireless Neck Speaker System

Model No.

Thank you for purchasing this product.

Please read these instructions carefully before using this product, and save this manual for future use.

(U.S. customers only)

If you have any questions, visit:

In the U.S.A.:

http://shop.panasonic.com/support

In Canada:

www.panasonic.ca/english/support

TQBS0526

Safety precautions

∫Unit

∫Places where you use or store the product

• This unit is for indoor use.

• Do not use or leave where the temperature is extremely high such as in locations exposed to direct sunlight or

near heating devices.

• Do not use or leave in locations with a lot of dust.

• Do not use or leave in locations with a lot of vibration.

• Do not use or leave in locations with a lot of moisture, such as bathrooms.

∫Handling

• Do not drop, hit, or apply strong shocks. This may cause malfunction.

• Sound may be interrupted or you may hear noise if the plug tip is dirty. If this occurs, wipe the tips of the plug

and plug adaptor clean with a soft dry cloth.

∫Built-in battery

• Do not heat or expose to flame.

• Do not leave this unit in a car exposed to direct sunlight for a long period of time with doors and windows

closed.

• Do not expose to low air pressure at high altitudes.

• Do not expose to extremely low air pressure, as this may result in explosions or leakage of flammable liquids

and gases.

WARNING:

To reduce the risk of fire, electric shock or product damage,

• Do not expose this unit to rain, moisture, dripping or splashing.

• Do not place objects filled with liquids, such as vases, on this unit.

• Use the recommended accessories.

• Do not remove covers.

• Do not repair this unit by yourself. Refer servicing to qualified service personnel.

Avoid the use in the following conditions

• High or low extreme temperatures during use, storage or transportation.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can

result in an explosion.

• Extremely high temperature and/or extremely low air pressure that can result in an explosion or the

leakage of flammable liquid or gas.

This unit may receive radio interference caused by mobile telephones during use. If such interference occurs,

please increase separation between this unit and the mobile telephone.

The symbols on this product (including the accessories) represent the following:

Í Standby

A lithium ion battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERY for information on how to recycle this battery.

For US and Canada only

Pour les É.-U. et le Canada seulement

This device complies with Part 15 of FCC Rules and Innovation, Science and Economic Development

Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

(1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may cause undesired operation.

Contains FCC ID: NKR-SWA20

Contains IC: 4441A-SWA20

Model: SC-GNW10 (SB-GNW10, SH-GNW10)

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

(For the U.S.A. only)

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and

meets the FCC radio frequency (RF) Exposure Guidelines as this equipment has very low levels of RF

energy.

(For Canada only)

This equipment has been tested and found to comply with ISED radiation exposure limits set forth for an

uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules.

THE FOLLOWING APPLIES ONLY IN THE U.S.A.

FCC Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

Any changes or modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Supplier’s Declaration of Conformity

Trade Name: Panasonic

Model No.: SC-GNW10

Responsible Party: Panasonic Corporation of North America

Two Riverfront Plaza, Newark, NJ 07102-5490

Support Contact: http://shop.panasonic.com/support

THE FOLLOWING APPLIES ONLY IN CANADA.

CAN ICES-003(B) / NMB-003(B)

Conforms to

UL STD 62368-1.

Certified to CAN/CSA STD

C22.2 No.62368-1.

Conforme à la norme CAN/CSA

C22.2 No.62368-1.

Table of contents

Safety precautions ...................................................................................................................................... 2

Before use

Accessories................................................................................................................................................. 5

Maintenance................................................................................................................................................ 5

Part names (SC-GNW10) ........................................................................................................................... 6

Part names (Transmitter) ............................................................................................................................ 7

Charging...................................................................................................................................................... 8

Connecting the transmitter .......................................................................................................................... 9

• Connecting with the USB cable (USB input) ........................................................................................ 9

• Connecting an active subwoofer (optional) .........................................................................................11

Using the SC-GNW10 ............................................................................................................................... 12

Wirelessly connecting the SC-GNW10 and the transmitter ...................................................................... 12

• Turn on the SC-GNW10 ..................................................................................................................... 12

Operation

Basic operations........................................................................................................................................ 13

• Adjusting the volume .......................................................................................................................... 13

• Enjoying sound field effects that suit the source (sound mode) ......................................................... 13

• Microphone muting ............................................................................................................................. 14

• Using SC-GNW10 with a USB cable connected ................................................................................ 14

Changing the SC-GNW10’s settings......................................................................................................... 15

• Changing the volume of the other party in a chat (chat volume mode) .............................................. 15

• Adjusting the bass (Bass Level) ......................................................................................................... 15

• Turning off the operation indicators during wireless connection (lighting settings)............................. 16

• Pairing the SC-GNW10 and the transmitter again.............................................................................. 16

• Changing settings using the app for use in Windows (SOUNDSLAYER Engine) .............................. 16

Other

Restore factory settings ............................................................................................................................ 17

Licenses .................................................................................................................................................... 17

Troubleshooting......................................................................................................................................... 18

Software update ........................................................................................................................................ 21

Specifications ............................................................................................................................................ 22

When disposing of the product.................................................................................................................. 24

• To remove the battery when disposing of the SC-GNW10 ................................................................. 24

Before use

Accessories

Please check and identify the supplied accessories.

1 x Wireless Transmitter

• Described as “transmitter” in this document.

1 x USB charging cord

• Approx. 0.2 m (0.66 ft)

1 x USB cable (for use with the Wireless Transmitter)

• Approx. 1.0 m (3.2 ft)

Only for U.S.A.:

To order accessories, refer to “Limited Warranty” in the “Basic Owner’s Manual”.

Maintenance

• To clean the SC-GNW10, wipe with a soft, dry cloth.

• Never use alcohol, paint thinner or benzine to clean this system.

• Before using chemically treated cloth, read the instructions that came with the cloth carefully.

Expressions used in this document

• Pages to be referred to are indicated as “l±±”.

• The product illustrations may differ from the actual product.

Before use

Part names (SC-GNW10)

1 Rear(R) speaker

2 Front (R) speaker

3 Operation indicator (R)

4 Microphone (R)

5 Rear (L) speaker

6 Built-in antenna

7 Charging terminal

8 Front (L) speaker

9 Operation indicator (L)

10 [VOL] dial (volume dial)

11 Microphone (L)

12 [Í]button (standby button)

13 [ ] button (sound mode button)

14 [ ] button (microphone mute button)

Operation indicator lighting/blinking examples

*1 When only the operation indicator (R) is blinking (red), the battery is low. (l8, “Battery level notification”)

*2 If the “Lighting Settings” in the app for use in Windows (l16) are set to “OFF”, the indicators turn off after about 3

seconds.

Operation indicator (L) Operation indicator (R) State

Off Lights (red) Charging is in progress

Lights (cyan)*1*2 Lights (cyan)*1*2 Connected wirelessly

Off Blinking slowly (cyan)*1 On standby for wireless connection

Off Blinking rapidly (blue) On standby for pairing (registration) for a wireless

connection

Lights (red) Lights (red) Microphones muted

12 13 14

Before use

Part names (Transmitter)

1 [-PAIRING] button (pairing button)

2 Operation indicator

3 Built-in antenna

4 Audio output terminal [SUB OUT]

5 USB port

Operation indicator lighting/blinking examples

Operation indicator State

Lights (cyan) Connected wirelessly

Blinking slowly (cyan) On standby for wireless connection

Blinks (cyan) On standby for pairing (registration) for a wireless connection

Lights (red) Microphones muted

Blinks (red) Blinks when connected to the transmitter using the supplied USB charging

cord (approx. 0.2 m (0.66 ft)), etc.

Reconnect using the supplied USB cable (approx. 1.0 m (3.2 ft)).

Before use

Charging

The rechargeable battery (installed in the SC-GNW10) is not charged initially. Charge the battery before using

the SC-GNW10.

• The operation indicator (R) lights (red) during charging and goes out when charging finishes.

AUSB charging cord (supplied)

BUSB AC adaptor, etc.

∫Charging time

Note:

• When using a USB AC adapter first connect the SC-GNW10 to the charger, then plug the charger into the AC power

source.

• Use a USB AC adaptor that is capable of supplying an output current of at least 1500 mA at 5 V DC. It is also possible

to use a device that has an output current of less than 1500 mA, but it may not be able to charge correctly.

• Charging by connecting the supplied USB cable to the USB port that supports USB charging on a computer is also

possible. However, this operation is not guaranteed on all computers.

• Charging may not be performed or may stop if the computer is in or switched to standby or sleep mode.

• Do not use any other USB charging cord except the one which is supplied. Doing so may cause a malfunction.

• The built-in rechargeable battery may deteriorate if it is not used for long periods, so recharge once every 6 months.

• The volume reduces if you use the SC-GNW10 with the USB cable connected.

∫Battery level notification

• When the battery level drops to 20 %, the operation indicator (R) blinks (red) and an operation tone sounds.

• When you press and hold the [ ] button while the SC-GNW10 is on, you can see the remaining battery charge with

the operation indicators.

Approx. 4.0 hours

• When using a USB AC adaptor (optional) that is capable of supplying an output current of 1500 mA at 5 V DC

• Ambient temperature 25 oC (77 oF)/When recharging a fully discharged battery

Remaining battery charge Operation indicator (L) Operation indicator (R)

71 % to 100 % Lights (blue) Lights (blue)

21 % to 70 % Lights (blue) Off

6 % to 20 % Lights (red) Off

5 % or less Blinks (red) Off

USB



Before use

Connecting the transmitter

Connect the transmitter to your game console’s/PC’s USB port. This device supports PC, PS4/PS5 Nintendo

Switch. This device does not support Xbox.

• Power is supplied from the USB port that the transmitter is connected to.

• Before connecting the transmitter, make sure your PC/Game Console is powered on.

• The operation indicator of the transmitter lights (cyan) when there is a wireless connection with the SC-GNW10 and

blinks (cyan) when there is no wireless connection with the SC-GNW10.

• If the operation indicator on the transmitter is blinking red, check that you have connected using the supplied USB

cable (approx. 1.0 m (3.2 ft)).

• In order to properly use the SC-GNW10, depending on the operating environment and OS, you need to change some

sound settings on the computer. (l10, “When connecting to a PC”)

AUSB cable (supplied)

BPC, PS4/PS5 Nintendo Switch

CUSB port

Note:

• Do not use any other USB cables except the one which is supplied. Doing so may cause a malfunction.

The shorter cable is specifically for recharging, and as such it cannot be used to connect with the transmitter.

• The operation indicator of the transmitter blinks (cyan) (no wireless connection with SC-GNW10), but the operation

indicator turns off after this continues for about a minute. The operation indicator turns off, but wireless connection is

possible when SC-GNW10 turns on. When connected wirelessly with SC-GNW10 or [-PAIRING] button operations

are performed, the indicator lights again.

Connecting with the USB cable (USB input)

USB







Before use

Note:

• Depending on the specifications of the computer, the settings may change if you plug the USB cable into a different

terminal or if you restart the computer. If this happens, change the sound settings on the computer to

“Panasonic SC-GNW10 (Game)” again.

∫When connecting to a PC

In order to properly use the SC-GNW10, depending on the operating environment and OS, you need to

change some sound settings on the computer. Two devices are shown when you connect the transmitter, so

make the settings as follows:

Make “Panasonic SC-GNW10 (Game)” the default device for “Playback”.

1 Click the speaker icon in the task tray.

2 Click the “ ” at the top right of the volume bar.

3 Select “Panasonic SC-GNW10 (Game)”.

Make “Panasonic SC-GNW10 (Game)” the default device for “Playback”,

make “Panasonic SC-GNW10 (Chat)” the default device for “Recording”.

1 Right-click the speaker icon in the task tray and select “Sounds”.

2 Click the “Playback” tab.

3 Right-click “Panasonic SC-GNW10 (Game)” and select “Set as Default Device”.

4 Click the “Recording” tab.

5 Right-click “Panasonic SC-GNW10 (Chat)” and select “Set as Default Device”.

10:00

01/12/2023 10:00

01/12/2023

XXXXXXXXXXXXX.

Panasonic SC-GNW10 (Game)

Select playback device

Panasonic SC-GNW10 (Chat)

Click on Select

Click on

10:00

01/12/2023

Sounds

XXXXXXXXXXX

Sound

Playback Recording

XXXXX

XXXXXXXXXXXXXXX

Panasonic SC-GNW10 (Game)

XXXXX

XXXXXXXXXXXXXXX

XXXXX XXXXX

XXXXX

Set as Default Device

XXXXX

Sound

Playback Recording

XXXXX

XXXXXXXXXXXXXXX

Panasonic SC-GNW10 (Game)

XXXXX

XXXXXXXXXXXXXXX

XXXXX XXXXX

Click on



Click on



Click on



Andere Handbücher für SOUNDSLAYER SC-GNW10

Inhaltsverzeichnis

Andere Panasonic Sprecher Handbücher

Panasonic

Panasonic SB-MAX770PU Bedienungsanleitung

Panasonic

Panasonic SB-AK230 Bedienungsanleitung

Panasonic

Panasonic TY-SP65P10WK Bedienungsanleitung

Panasonic

Panasonic SC-UA7GS Bedienungsanleitung

Panasonic

Panasonic SB-HS650P Bedienungsanleitung

Panasonic

Panasonic TY-SP65P10WK Bedienungsanleitung

Panasonic

Panasonic SB-WAK750PL Bedienungsanleitung

Panasonic

Panasonic SB-VKX95GA Bedienungsanleitung

Panasonic

Panasonic SY-PA100 Bedienungsanleitung

Panasonic

Panasonic SB-PM45PC Bedienungsanleitung

Panasonic

Panasonic RAMSA WS-A35 Bedienungsanleitung

Panasonic

Panasonic SOUNDSLAYER SC-GNW10 Montage- und Serviceanleitung

Panasonic

Panasonic TY-SP65P11WK Bedienungsanleitung

Panasonic

Panasonic SC-ALL9 Bedienungsanleitung

Panasonic

Panasonic SC-TMAX5 Bedienungsanleitung

Panasonic

Panasonic SC-ALL2 Bedienungsanleitung

Panasonic

Panasonic SC-UA7E Bedienungsanleitung

Panasonic

Panasonic SB-VK62 Bedienungsanleitung

Panasonic

Panasonic SB-AKX38PN Bedienungsanleitung

Panasonic

Panasonic SH-FX65 - Wireless Audio Delivery System Bedienungsanleitung

Panasonic

Panasonic SC-HTB770S Bedienungsanleitung

Panasonic

Panasonic Sound Slayer SC-HTB01 Montage- und Serviceanleitung

Panasonic

Panasonic SB-HFS4810E Bedienungsanleitung

Panasonic

Panasonic SC-NE3 Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung