Panasonic KX-HNL200 Bedienungsanleitung

Installation Guide

Home Network System

Smart On/Off Light Switch

Model No. KX-HNL200

TEMP

Thank you for purchasing a Panasonic product.

This document explains how to install the switch properly.

For details about how to use the system, refer to the User’s Guide

(page 13).

Please read this document before using the unit and save it for future

reference.

For assistance, please contact us at 1-800-272-7033 or visit our Web

site: http://shop.panasonic.com/support for customers in the U.S.A.

Please register your product: http://shop.panasonic.com/support

Printed in China

Introduction

Accessory information ...............3

Important Information

About this system ......................4

For your safety ...........................4

Important safety instructions ......5

For best performance ................5

Other information .......................6

Setup

Part names and functions ..........7

LED indicator .............................7

Setup overview ..........................7

Confirming the usage

conditions ..................................8

Installation ...............................10

Registering the switch .............11

Appendix

Testing the motion sensor .......13

Using the switch (manual

control) .....................................13

Features available when using the

[Home Network] app ................13

Accessing the User’s Guide ....13

Specifications ..........................14

FCC and other information ......15

Customer services ...................16

Limited Warranty (ONLY FOR

U.S.A.) .....................................17

Table of Contents

Accessory information

Supplied accessories

No. Accessory item/Part number Quantity

Axx/xx*1 xx

Bxx/xx*2 xx

Cxx/xx xx

*1 xx

*2 xx

TEMP

Other information

RDesign and specifications are subject to change without notice.

RThe illustrations in these instructions may vary slightly from the actual product.

Trademarks

RiPhone and iPad are registered trademarks of Apple Inc.

RAndroid is a trademark of Google Inc.

RMicrosoft, Windows, and Internet Explorer are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or other countries.

RAll other trademarks identified herein are the property of their respective owners.

For assistance, please visit http://shop.panasonic.com/support 3

Introduction

About this system

RThis system is an auxiliary system; it

is not designed to provide complete

protection from property loss.

Panasonic will not be held

responsible in the event that

property loss occurs while this

system is in operation.

RThe system’s wireless features are

subject to interference, therefore

functionality in all situations cannot

be guaranteed. Panasonic will not

be held responsible for injury or

damage to property that occurs in

the event of wireless communication

error or failure.

For your safety

To prevent severe injury and loss of life/

property, read this section carefully

before using the product to ensure

proper and safe operation of your

product.

WARNING

Power connection

RUse only the power source marked

on the product.

RDo not connect non-specified

devices.

Installation

RTo prevent the risk of fire or

electrical shock, do not expose the

product to rain or any type of

moisture.

RDo not place or use this product

near automatically controlled

devices such as automatic doors

and fire alarms. Radio waves

emitted from this product may cause

such devices to malfunction

resulting in an accident.

RKeep small parts (screws, etc.) out

of the reach of children. There is a

risk of swallowing. In the event they

are swallowed, seek medical advice

immediately.

Operating safeguards

RDo not disassemble the product.

Medical

RConsult the manufacturer of any

personal medical devices, such as

pacemakers or hearing aids, to

determine if they are adequately

shielded from external RF (radio

frequency) energy. DECT features

operate between 1.92 GHz and

1.93 GHz with a peak transmission

power of 115 mW.

RDo not use the product in health

care facilities if any regulations

posted in the area instruct you not to

do so. Hospitals or health care

facilities may be using equipment

that could be sensitive to external

RF energy.

CAUTION

Battery

RThe batteries should be used

correctly, otherwise the product may

be damaged due to battery leakage.

RDo not charge, short-circuit,

disassemble, or heat the batteries.

RDo not dispose of batteries in a fire.

RRemove all the batteries when

replacing.

4For assistance, please visit http://shop.panasonic.com/support

Important Information

RDo not mix old, new or different

types of batteries.

RIt is recommended that batteries are

replaced annually.

RKeep out of the reach of small

children. There is a risk of

swallowing. If the battery is

swallowed, seek medical attention

immediately.

RRemove the battery if it becomes

unusable. There is a risk of leakage,

overheating, and rupture. Do not

attempt to use a battery if it is

leaking.

RDo not intentionally pour water on

the battery or allow it to get wet.

There is a risk of fire and smoke. If

the battery becomes wet, remove it

immediately and contact an

authorized service center.

Important safety

instructions

When using your product, basic safety

precautions should always be followed

to reduce the risk of fire, electric shock,

and injury to persons, including the

following:

1. Do not use this product near water

for example, near a bathtub,

washbowl, kitchen sink, or laundry

tub, in a wet basement or near a

swimming pool.

2. Use only the batteries indicated in

this document. Do not dispose of

batteries in a fire. They may

explode. Check with local codes for

possible special disposal

instructions.

SAVE THESE INSTRUCTIONS

For best performance

Hub location/avoiding noise

The hub and other compatible

Panasonic devices use radio waves to

communicate with each other.

RFor maximum coverage and

noise-free communications, place

your hub:

– at a convenient, high, and central

location with no obstructions

between the product and hub in

an indoor environment.

– away from electronic appliances

such as TVs, radios, personal

computers, wireless devices, or

other phones.

– facing away from radio frequency

transmitters, such as external

antennas of mobile phone cell

stations. (Avoid putting the hub

on a bay window or near a

window.)

RIf the reception for a hub location is

not satisfactory, move the hub to

another location for better reception.

Environment

RKeep the product away from

electrical noise generating devices,

such as fluorescent lamps and

motors.

RThe product should be kept free

from excessive smoke, dust, high

temperature, and vibration.

RThe product should not be exposed

to direct sunlight.

RDo not place heavy objects on top of

the product.

RThe product should be kept away

from heat sources such as heaters,

kitchen stoves, etc. It should not be

placed in rooms where the

For assistance, please visit http://shop.panasonic.com/support 5

Important Information

temperature is less than 0 °C (32 °F)

or greater than 40 °C (104 °F).

Damp basements should also be

avoided.

ROperating the product near electrical

appliances may cause interference.

Move away from the electrical

appliances.

Other information

CAUTION: Risk of explosion if battery

is replaced by an incorrect type.

Dispose of used batteries according to

the instructions.

Routine care

RWipe the outer surface of the

product with a soft moist cloth.

RDo not use benzine, thinner, or any

abrasive powder.

Information on Disposal in other

Countries outside the European

Union

These symbols are only valid in the

European Union. If you wish to discard

these items, please contact your local

authorities or dealer and ask for the

correct method of disposal.

Note for the battery removal

procedure

Refer to “xx” on xx.

Notice

6For assistance, please visit http://shop.panasonic.com/support

Important Information

Part names and

functions

TEMP

On/off switch

LED indicator

Motion sensor

Maintenance button

Press this button to disable the

switch while replacing light bulbs.

When finished, press the button

again.

M N

Used to confirm the status of the

switch or register the switch to the

hub.

LED indicator

During normal operation, the LED

indicator lights in blue when the

surrounding environment is dark,

allowing you to use the LED indicator

as a night light.

You can also press M N and check

the LED indicator to confirm the

switch’s status.

Indicator Status

Off Switch is off, no power

supplied to switch

Green, lit Switch is on

Green,

blinking

slowly

Registration mode

(You pressed and held

M N)

Red,

blinking

very quickly

Motion was detected

Red,

blinking

Switch is out of range

of the hub

Note:

RThe LED indicator does not indicate

the status of the switch if the switch

has not been registered to a hub

(page 11).

Setup overview

1Initial setup

Make sure you can access the

system using your mobile device.

For details, refer to the System

Setup Guide included with your

hub.

2Confirm the installation

conditions

Read the information in this

document to confirm that the

installation conditions are suitable

to proper operation.

3Installation

Install the switch in the desired

location.

4Registration

Required only if the switch was

purchased separately (i.e., not as

part of a bundle).

For assistance, please visit http://shop.panasonic.com/support 7

Setup

Confirming the

usage conditions

Confirming the usage area

Wireless communication range

In optimal conditions, the wireless

communication range of each device in

the system from the hub is

approximately 50 m (160 feet) indoors

and approximately 300 m (1,000 feet)

outdoors.

RWireless communication may be

reduced or unreliable when the

following obstacles are located

between the hub and other devices.

– Metal doors or screens

– Walls containing aluminum-sheet

insulation

– Walls made of concrete or

corrugated iron

– Double-pane glass windows

– Multiple walls

– When using each device on

separate floors or in different

buildings

RWireless communication is reduced

by approximately xx% if the switch is

installed in a metal junction box.

RWireless communication is reduced

by approximately xx% for each wall

located between the hub and the

switch.

RAfter the switch is installed and

registered to the hub, you can check

the switch’s communication status

by pressing MN (page 7).

Usage area cautions

Using the switch in the following areas

may cause deformation, malfunction, or

operational failure.

RIn direct sunlight

RAreas exposed to grease or steam,

such as kitchens

RNear fire or heating devices

RNear magnetic fields (such as near

microwaves and magnets)

RAreas subject to extreme

temperature changes, such as next

to air conditioners

RAreas with reflective objects, such

as glass, that can interfere with

detection of temperature variation

RAreas where the temperature is

affected by strong illuminating

objects (such as fluorescent lights)

RNear devices that emit strong radio

waves, such as mobile phones

Information about motion

sensor features

The switch utilizes an infrared sensor

(i.e., heat sensor) to detect motion. In

this document, this sensor is referred to

as a "motion sensor".

Please read the following information

before deciding where to install the

switch.

Note:

RThe switch’s motion sensor features

are not designed to be used in

situations that require high reliability.

We do not recommend use of the

switch’s motion sensor features in

these situations.

RPanasonic takes no responsibility for

any injury or damage caused by the

use of the switch.

Using heat to detect motion

The switch’s motion sensor can detect

motion by recognizing temperature

differences that occur within the range

of the sensor. It does this by detecting

8For assistance, please visit http://shop.panasonic.com/support

Setup

the infrared rays that are emitted

naturally by people, animals, etc.,

which correlate to the object’s

temperature. The detection range is

indicated in the illustration by the gray

area in front of the switch.

Detection range when looking from

above

TEMP

Horizontal detection range

Approx. 120°

Distance of detectable motion

Approx. 10 m (32.8 feet)

Detection range when looking from

the side

TEMP

Vertical detection range

Approx. 40° (pitched upward by

1.5°)

Distance of detectable motion

Approx. 10 m (32.8 feet)

Note:

RDetection becomes difficult when

there is little difference between the

temperatures of objects and the

surrounding environment, such as

during summer. Conversely,

detection becomes easier when

there is a large difference between

the temperatures of objects and the

surrounding environment, such as

during winter or at night.

Direction of motion

It is easier to detect objects that move

sideways in front of the switch, and

more difficult to detect objects that

move directly toward the front of the

switch.

TEMP

Difficult to detect

People approach the switch from

the front

Easy to detect

People pass in front of the switch

from side to side

Detection range

Compatible lighting

The switch can be used to control the

following types of lighting.

– Incandescent or halogen bulbs Total

maximum output of all connected

bulbs: 600 W

– LED or CFL bulbs Total maximum

output of all connected bulbs: 150 W

For assistance, please visit http://shop.panasonic.com/support 9

Setup

Installation

Important:

RSwitch off the power of the

corresponding circuit before

performing any electrical work.

RFollow all local codes and

regulations.

RInstallation should be performed by

a licensed electrician.

RThe switch cannot be used in 3-way

circuits, i.e., situations where two

light switches control the same light

fixture, such as at the top and

bottom of a stairway.

Preparation

These steps are necessary when

replacing a switch.

1Turn off the power to the circuit at

the circuit breaker or fuse panel.

TEMP

2Remove the existing wall plate,

then remove the existing switch

from the junction box.

TEMP

RBe careful not to touch any

wires connected to the existing

switch.

3Use a non-contact circuit tester to

confirm that the wires connected

to the existing switch are not

carrying power.

TEMP

10 For assistance, please visit http://shop.panasonic.com/support

Setup

Inhaltsverzeichnis

Andere Panasonic Schalten Handbücher

Panasonic

Panasonic SG-B2 Series Bedienungsanleitung

Panasonic

Panasonic CF-VEBU Series Bedienungsanleitung

Panasonic

Panasonic AH1 Bedienungsanleitung

Panasonic

Panasonic AV-HS04M3 Bedienungsanleitung

Panasonic

Panasonic AVHS400AN - MULTI-FORMAT LIVE SWITCHER Bedienungsanleitung

Panasonic

Panasonic WJ-SW208 Bedienungsanleitung

Panasonic

Panasonic CF-VEBU07W Bedienungsanleitung

Panasonic

Panasonic Switch-M24eGLPWR+ Series Bedienungsanleitung

Panasonic

Panasonic GA-AS12TPoE+ Series Bedienungsanleitung

Panasonic

Panasonic Switch-S24GPWR Bedienungsanleitung

Panasonic

Panasonic AW-HS50E Bedienungsanleitung

Panasonic

Panasonic AV-HS410N Bedienungsanleitung

Panasonic

Panasonic GA-AS10TPoE+ Series Bedienungsanleitung

Panasonic

Panasonic AVHS300G - HD SWITCHER Bedienungsanleitung

Panasonic

Panasonic GA-AS24T Bedienungsanleitung

Panasonic

Panasonic KX-HNB600AZ Bedienungsanleitung

Panasonic

Panasonic Arbitrator WV-TW37003 Bedienungsanleitung

Panasonic

Panasonic AVHS400AN - MULTI-FORMAT LIVE SWITCHER Bedienungsanleitung

Panasonic

Panasonic SW-200 Series Bedienungsanleitung

Panasonic

Panasonic AJ9 (J9) Bedienungsanleitung

Panasonic

Panasonic CF-VEB Series Bedienungsanleitung

Panasonic

Panasonic WJMP204C - DATA MULTIPLEX UNIT Bedienungsanleitung

Panasonic

Panasonic Switch-M8eGi Series Bedienungsanleitung

Panasonic

Panasonic AV-HS300 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung