Panasonic M24PWR Bedienungsanleitung

Thank you for purchasing our product.

This manual provides important information about safe and proper

operations of this Switching Hub.

Please read the

"Important Safety Instructions"

on pages 2 to 4.

Any problems or damage resulting from disassembly of this Switching

Hub by customers are not covered by the warranty.

Switch-M24PWR

Model Number: PN23249A

Operation Manual

For Menu Screens

Important Safety Instructions

This chapter contains important safety instructions for preventing bodily

injury and/or property damage. You are required to follow them.

Severity of bodily injury and/or property damage, which could result

from incorrect use of the Switching Hub, are explained below.

The following symbols are used to classify and describe the type of

instructions to be observed.

This symbol is used to alert

users to what they must



Do not use power other than AC 100 - 240V.

Deviation could lead to fire, electric shock, and/or equipment

failure.



Do not handle the power cord with wet hand.

Deviation could lead to electric shock and/or equipment failure.



Do not handle this Switching Hub and connection cables during a

thunderstorm.

Deviation could lead to electric shock.



Do not disassemble and/or modify this Switching Hub.

Deviation could lead to fire, electric shock, and/or equipment

failure.



Do not damage the power cord. Do not bend too tightly, stretch,

twist, bundle with other cord, pinch, put under a heavy object,

and/or heat it.

Damaged the cord could lead to fire, short, and/or electric shock.



Do not put foreign objects (such as metal and combustible) into the

opening (such as twisted pair port, console port, SFP extension slot),

and/or do not drop them into the inside of the Switching Hub.

Deviation could lead to fire, electric shock, and/or equipment

failure.



Do not connect equipments other than

10BASE-T/100BASE-TX/1000BASE-T to twisted pair port.

Deviation could lead to fire, electric shock, and/or equipment

failure.

WARNIN

This symbol indicates safety instructions.

Deviation from these instructions could lead to

bodily injury and/or property damage

This symbol is used to alert

users to what they must

WARNIN

This symbol indicates

a potential hazard that

could result in serious injury or death.

CAUTIO



Do not install this Switching Hub at the location with continuous

vibration or strong shock, or at the unstable location

Deviation could lead to injury and/or equipment failure.



Do not install any module other than the separately sold SFP module

to SFP extension slot.

Deviation could lead to fire, electric shock,

and/or equipment

failure.



Do not connect any cable other than the separately sold console

cable.

Deviation could lead to fire, electric shock,

and/or equipment

failure.



Do not put this Switching Hub into fire.

Deviation could lead to explosion and/or fire.



Do not use the supplied power cord for anything other than this

product

WARNIN

CAUTION



Use the bundled power cord (AC 100 – 240V specifications).

Deviation could lead to electric shock, malfunction, and/or

equipment failure.



Unplug the power cord in case of equipment failure.

Deviation such as keeping connected for a long time, could lead to

fire.



Connect this Switching Hub to ground.

Deviation could lead to electric shock, malfunction, and/or

equipment failure.



Connect the power cord firmly to the power port.

Deviation could lead to electric fire, shock, and/or malfunction.

l h d if h ( lf di i ) bli k i



Handle the Switching Hub carefully so that fingers or hands may not

be damaged by twisted pair port, SFP extension slot, console port, or

power cord hook block

Basic Instructions for the Use of This Product

For inspection and/or repair, consult the retailer.

Use commercial power supply from a wall socket, which is close and easily

accessible to this Switching Hub.

Unplug the power cord when installing or moving this Switching Hub.

Unplug the power cord when cleaning this Switching Hub.

Use this Switching Hub within the specifications. Deviation could lead to

malfunction.

Do not touch the metal terminal of the RJ45 connector, the modular plug of

connected twisted pair cable, or the metal terminal of the SFP extension slot.

Do not place charged objects in the proximity of them. Static electricity could

lead to equipment failure.

Do not put the modular plug of the connected twisted pair cable on objects

that can carry static charge, such as carpet. Do not place it in the proximity.

Static electricity could lead to equipment failure.

Do not put a strong shock, including dropping, to this Switching Hub.

Deviation could lead to equipment failure.

Before connecting a console cable to the console port, discharge static

electricity, for example by touching metal appliance (do not discharge by

touching this Switching Hub).

Do not store and/or use this Switching Hub in the environment with the

characteristics listed below.

(Store and/or use this Switching Hub in the environment in accordance with

the specification.)

 High humidity. Possible spilled liquid (water).

Dusty. Possible static charge (such as carpet).

Under direct sunlight.

 Possible condensation. High/low temperature exceeding the specifications

environment.

 Strong vibration and/or strong shock.

Please use this Switching Hub in place where ambient temperature is from 0

to 40℃.

When the total power supply is 145W or less, please use the Switching Hub in

place where ambient temperature is from 0 to 45℃.

When the total power supply is 130W or less, please use the Switching Hub in

place where ambient temperature is from 0 to 50℃.

Failure to meet the above conditions may result in fire, electric shock,

breakdown, and/or malfunction. Please take notice because such cases are

out of guarantee.

Additionally, do not cover the bent hole of this Switching Hub.

Deviation could lead to high internal temperature, equipment failure and/or

malfunction.

When stacking Switching Hubs, leave a minimum of 20 mm space between

them is required.

1. Panasonic will not be liable for any damage resulting from the

operation not in accordance with this operation manual or the loss of

communications, which may or may not be caused by failure and/or

malfunction of this device.

2. The contents described in this document may be changed without prior

notice.

3. For any question, please contact the retailer where you purchased the

product.

* Brands and product names in this document are trademarks or registered

trademarks of their respective holders.

Table of Contents

Basic Instructions for the Use of This Product................................................ 4

1. Product Outline........................................................................................ 11

1.1. Features .............................................................................................. 11

1.2. Accessories.......................................................................................... 12

1.3. Part Names and Functions.................................................................. 13

1.4. LED Behavior ...................................................................................... 14

1.4.1. LED Behavior at Starting-up.......................................................... 14

1.4.2. LED Behavior while Operating...................................................... 14

2. Installation ........................................................................................... 15

2.1. Installing in 19-inch Rack .................................................................... 15

3. Connection............................................................................................... 16

3.1. Connecting a Twisted Pair Port .......................................................... 16

3.2. Connecting an SFP Extension Port...................................................... 17

3.3. Connecting to Power.......................................................................... 18

4. Configuration........................................................................................... 19

4.1. Connecting via Console Port .............................................................. 19

4.2. Login................................................................................................... 20

4.3. Basic Operations on the Screen.......................................................... 23

4.4. Main Menu ......................................................................................... 25

4.5. General Information Menu ................................................................ 27

4.6. Basic Switch Configuration................................................................. 29

4.6.1. System Administration Configuration........................................... 30

4.6.2. System IP Address Configuration.................................................. 31

4.6.3. SNMP Configuration ..................................................................... 34

4.6.3.a SNMP Management Configuration......................................... 35

4.6.3.b. SNMP Trap Receiver Configuration........................................ 37

4.6.3.c Enable/Disable Individual Trap ............................................... 39

4.6.4. Port Configuration Basic ............................................................... 41

4.6.5. Port Configuration Extend............................................................ 44

4.6.6. System Security Configuration...................................................... 47

4.6.6.a. Telnet Access Limitation Configuration.................................. 50

4.6.6.b. RADIUS Configuration............................................................ 52

4.6.6.c. Syslog Transmission Configuration......................................... 54

4.6.7. Mail Report Configuration............................................................ 56

4.6.7.a. Report Data Configuration .................................................... 58

4.6.8. Forwarding Database ................................................................... 61

4.6.8.a. Adding or deleting MAC address ........................................... 62

4.6.8.b. Setting learning mode of MAC address ................................. 63

4.6.8.c Displaying MAC address table by port .................................... 64

4.6.8.d Displaying all MAC addresses .................................................. 66

4.6.8.e Displaying MAC address table by VLAN.................................. 67

4.6.9. Time Configuration ....................................................................... 69

4.6.10. ARP Table Configuration ............................................................ 71

4.7. Advanced Switch Configuration......................................................... 73

4.7.1. VLAN Management ...................................................................... 75

4.7.1.a. Special Features ...................................................................... 75

4.7.1.b. VLAN Management Menu...................................................... 76

4.7.1.c. VLAN Creation Menu .............................................................. 80

4.7.1.d. VLAN Modification Menu ....................................................... 82

4.7.1.e. VLAN Port Configuration Menu ............................................. 84

4.7.2. Link Aggregation .......................................................................... 86

4.7.2.a About Link aggregation.......................................................... 86

4.7.2.b. Trunk Configuration............................................................... 88

4.7.2.c. Set Port Priority for LACP ....................................................... 91

4.7.2.d. LACP Group Status ................................................................. 93

4.7.3. Port Monitoring Configuration..................................................... 96

4.7.4. Multiple Spanning Tree Configuration ......................................... 98

4.7.4.a. CIST (MST Instance 0) Configuration.................................... 102

4.7.4.b CIST Basic Port Configuration ............................................... 104

4.7.4.c. CIST Advanced Port Configuration....................................... 107

4.7.4.d. MST Instance Configuration................................................. 110

4.7.4.e. MST Instance Advanced Configuration................................ 112

4.7.4.f. MST Instance Port Configuration.......................................... 114

4.7.4.g MST Instance Topology Information..................................... 117

4.7.4.h. Designated Topology Information ....................................... 119

4.7.4.i. Regional Topology Information............................................ 120

4.7.5. Access Control Configuration Menu ........................................... 122

4.7.5.a. Classifier Configuration Menu.............................................. 123

4.7.5.b. Create Classifier Configuration Menu .................................. 125

4.7.5.c. Classifier Configuration Menu .............................................. 129

4.7.5.d. Show Detailed Entries Information Menu............................ 131

4.7.5.e. In-Profile Action Configuration Menu.................................. 133

4.7.5.f. Create In-Profile Action Menu .............................................. 135

4.7.5.g. Out-Profile Action Configuration Menu............................... 137

4.7.5.h. Create Out-Profile Action Menu........................................... 139

4.7.5.i. Port List Configuration Menu................................................ 141

4.7.5.j. Policy Configuration Menu ................................................... 143

4.7.5.k. Create Policy Configuration Menu ....................................... 145

4.7.6. Quality of Service Configuration................................................. 147

4.7.6.a. Traffic Class Configuration ................................................... 148

4.7.6.b. Configuration of Scheduling Method................................... 149

4.7.7. Egress Rate Limiting Configuration Menu .................................. 150

4.7.8. Storm Control Configuration Menu............................................ 151

4.7.9. 802.1x Access Control Configuration.......................................... 154

4.7.9.a. IEEE 802.1X Port Based Access Control Configuration......... 155

4.7.9.b. MAC Based Access Control Configuration............................ 159

4.7.9.c. Force Authorized MAC Configuration Menu ....................... 163

4.7.9.d. Guest/Default VLAN Configuration Menu ........................... 165

4.7.9.e. IEEE 802.1X Statistics Menu ................................................. 167

4.7.9.f. EAP-Request Configuration Menu ........................................ 172

4.7.10. IGMP Snooping Configuration.................................................. 177

4.7.10.a. Set Leave Mode Menu ........................................................ 180

4.7.10.b. VLAN Filter Configuration................................................... 182

4.7.10.c. Router Port Table Configuration......................................... 183

4.7.10.d. Set Querier Configuration Menu ........................................ 184

4.7.11. Power Over Ethernet Configuration......................................... 186

4.7.11.a. PoE Port Configuration Menu ............................................. 187

4.7.11.b. PoE Global Configuration .................................................... 189

4.7.12. Ring Redundant Protocol Configuration .................................. 191

4.7.12.a. RRP Domain Creation Menu ............................................... 194

4.7.12.b. RRP Domain Modification Menu ........................................ 196

4.7.12.c. RRP Domain information Menu.......................................... 198

4.8. Statistics............................................................................................ 200

4.9. Switch Tools Configuration .............................................................. 205

4.9.1. TFTP Software Upgrade.............................................................. 206

4.9.2. Configuration File Upload/Download ........................................ 209

4.9.3. System Reboot ............................................................................ 211

4.9.4. Exception Handler....................................................................... 213

4.9.5. Ping Execution ............................................................................ 214

4.9.6. System Log.................................................................................. 217

4.7.6.a. Enable/Disable Individual System Log Menu........................ 220

4.9.7. Watch Dog Timer Menu.............................................................. 222

4.10. Save Configuration to Flash............................................................ 223

4.11. Command Line Interface (CLI)........................................................ 224

4.12. Logout ............................................................................................ 225

Appendix A. .............................................................................. Specifications

226

Appendix B. Procedures for Console Port Configuration using Windows

HyperTerminal ........................................................................................... 230

Appendix C. Easy IP Address Setup Function............................................. 231

Troubleshooting......................................................................................... 232

After-sales Service ...................................................................................... 234

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Panasonic Schalten Handbücher

Panasonic

Panasonic KX-HNB600 Bedienungsanleitung

Panasonic

Panasonic ABJ Bedienungsanleitung

Panasonic

Panasonic SW-111 Bedienungsanleitung

Panasonic

Panasonic ZEQUO 2310 Bedienungsanleitung

Panasonic

Panasonic AW-HS50 Series Bedienungsanleitung

Panasonic

Panasonic Switch-M16eGi Series Bedienungsanleitung

Panasonic

Panasonic WJ-220 Bedienungsanleitung

Panasonic

Panasonic Light Touch Switches EVQP4 Bedienungsanleitung

Panasonic

Panasonic ABV BV Bedienungsanleitung

Panasonic

Panasonic AV-HS450N Bedienungsanleitung

Panasonic

Panasonic AV-HS450N Bedienungsanleitung

Panasonic

Panasonic KX-HNB600FX Bedienungsanleitung

Panasonic

Panasonic GA-ML Series Bedienungsanleitung

Panasonic

Panasonic AVHS400N - MULTI FORMAT LIVE SWITCHER Bedienungsanleitung

Panasonic

Panasonic GA-ML8TPoE+ Bedienungsanleitung

Panasonic

Panasonic EVQQ7 Bedienungsanleitung

Panasonic

Panasonic PN28080K-TH Bedienungsanleitung

Panasonic

Panasonic CF-VEBU Series Bedienungsanleitung

Panasonic

Panasonic ESE22 Bedienungsanleitung

Panasonic

Panasonic EVQPU Bedienungsanleitung

Panasonic

Panasonic GA-AS12T Series Bedienungsanleitung

Panasonic

Panasonic GA-AS48TPoE+ Series Bedienungsanleitung

Panasonic

Panasonic PN28160A Bedienungsanleitung

Panasonic

Panasonic WH-0M1101A Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung