Panasonic FZ-M1 Series Bedienungsanleitung

Disclaimer

Computer specifications and manuals are subject to change without notice. Panasonic Corporation assumes no liability for

damage incurred directly or indirectly from errors, omissions or discrepancies between the computer and the manuals. Refer

for the latest information about optional products to the catalogs, etc.

Trademarks

Microsoft, Windows, and the Windows logo are registered trademarks or trademarks of Microsoft Corporation of the

United States and/or other countries.

Intel, Core, and PROSet are either registered trademarks or trademarks of Intel Corporation.

Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their respective

own companies.

PS0218-0

20170420ZAP

Personal Computer

Model No. FZ-M1 Series

Connect to a network

Illustrations and Terminology in this manual

This manual explains using the default setting.

“Windows 10 Pro” as “Windows” or “Windows 10”

Terms and illustrations in these instructions.

≪Enter≫: This means to press the Enter key.

≪Ctrl≫+ ≪F7≫: This means to press and hold ≪Ctrl≫key, and then press ≪F7≫key.

The display of the key may be different from this manual according to the keyboard used. (e.g. “Delete” instead of

“Del”)

Touch (Start) and then touch (Power).

Some illustrations and display examples may look different from the actual product. Some types of software are

automatically updated, and differences may occur from descriptions in this manual.

Tablet mode and Desktop mode

Windows 10 offers the tablet mode optimized for the touch panel operation, and also the desktop mode in which operation is

performed using the keyboard and touch panel.

The mode can be switched by touching (Notification), and then touching (Tablet mode) tile.

If some icons do not appear on the task bar, perform the following operations.

1. Touch and hold the task bar.

2. Select the item to display.

Regarding Windows 10

Screen Messages

Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen

messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference)

Displaying Apps

1. Touch (All apps).

Alternatively, touch (Start) at the bottom left corner in the desktop mode.

Opening the “Settings” screen

1. Touch (Settings).

Alternatively, touch (Start) - (Settings) in the desktop mode.

Introduction

NOT

Opening the Control Panel

On the Start screen, proceed as follows.

1. Touch (All apps) - [Windows System] - [Control Panel].

Alternatively, touch (Start) - [Windows System] - [Control Panel] in the desktop mode.

Notification area

The notification area is on the right side of the screen.

To display the notification, touch (Notification) on the task tray.

Connecting LAN

Do not connect the telephone cable to the LAN port.

1. Turn off the computer.

Do not use sleep or hibernation.

2. Connect the cable.

Connect the LAN port (A) and the network system (e.g., server, hub) using a LAN cable.

3. Turn on the computer.

LAN

CAUTIO

There are several ways of disabling and enabling wireless communication.

Using airplane mode

Setting [Wireless Configuration] in the [Advanced] menu of the Setup Utility

Settings in the Network and Sharing Center ( Using the Wireless LAN Function)

For further information about Wireless LAN.

For further information about Bluetooth.

For further information about Wireless WAN.

Using airplane mode*1

(For wireless LAN, wireless WAN, Bluetooth, and GPS)

1. Touch (Settings) - [Network & Internet] - [Airplane mode]*1.

Alternatively, touch (Start) - (Settings) - [Network & Internet] - [Airplane mode]*1 in the desktop mode.

2. To disable wireless communications, set [Airplane mode]*1 to [On].

To enable wireless communications, set [Airplane mode]*1 to [Off], and then;

set [Cellular] to [On] (for wireless WAN).

set [Wi-Fi]*1 to [On] (for wireless LAN).

set [GPS] to [On] (for wireless WAN).

set [Bluetooth] to [On] (for Bluetooth).

set [GPS/GNSS] to [On] (for GPS).

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen

messages. For example, [Flight mode]/[WiFi] may be displayed instead of [Airplane mode]/[Wi-Fi] in some language

preference.)

Disabling/Enabling Wireless Communication

NOT

Do not use wireless LAN on airplanes, in hospitals, or in other locations where wireless LAN signals may

affect devices.

Follow the instructions of airline companies and hospitals. If you use the computer in these locations, turn off the

wireless LAN.

To avoid unauthorized access to the computer through wireless LAN

We recommend you to make security settings such as encryption before using wireless LAN.

Otherwise the disk data such as the shared files can be exposed to the risk of unauthorized access.

Communication is established through the wireless LAN antenna (A). Do not block the antenna area with your hand or

body.

The transmission rate will be lower when a microwave oven is used near by.

To use wireless LAN, set [Wireless LAN] of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of

the Setup Utility.

Using the Wireless LAN Function

Before using a wireless LAN, turn the wireless LAN communication on.

Turning on/off the wireless LAN communication

1. To enable the wireless communication ( Disabling/Enabling Wireless Communication).

Setting the wireless LAN access point

Preparation

Follow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the

computer.

1. Turn the wireless LAN on.

2. Touch or on the task tray.

3. Select an access point, and touch [Connect].

4. Input the key you set for the access point to recognize the computer, and touch [Next].

Wait for the computer to connect to the wireless LAN access point.

When the icon on the notification area is changed to , the wireless LAN setting is complete.

Wireless LAN

CAUTIO

NOT

The settings depend on the network environment. For further information, ask the system administrator

or the person in charge of the network.

If you use the stealth type wireless LAN access point which restricts automatic detection of the wireless

LAN access point, take the following procedure.

If you do not perform the procedure below, you may not be able to access the wireless LAN access point

automatically or the wireless LAN access point may not be displayed.

1. Touch on the task tray, and then touch [Hidden network].

2. Touch[Connect], enter the necessary information such as the network name (SSID), and touch [Next].

For further information, ask the system administrator or the person in charge of the network.

Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a)

1. Touch (Panasonic PC Settings Utility) - (Settings) - (Network).

Alternatively, touch (Start) - (Panasonic PC Settings Utility) - (Settings) - (Network) in the

desktop mode.

2. Touch [Enabled] or [Disabled] for the wireless LAN IEEE802.11a.

In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law.

If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the

connection will be temporarily interrupted.

NOT

You can access internet and other Bluetooth devices without connecting cables.

Communication is established through the Bluetooth antenna (A). Do not block the antenna area with your hand or body.

To use Bluetooth, set [Bluetooth] of [Wireless Configuration] to [Enabled] (default) in the [Advanced] menu of the Setup Utility.

The transmission rate will be lower when a microwave oven is used near by.

When you uninstall the Bluetooth Driver, turn Bluetooth off.

Using the Bluetooth Function

Before using a Bluetooth, turn the Bluetooth communication on.

Turning on/off the Bluetooth communication

1. To enable the wireless communication ( Disabling/Enabling Wireless Communication).

2. Touch (Settings) - [Network & Internet] - [Airplane mode]*1 to [Off].

Alternatively, touch (Start) - (Settings)-[Network&Internet]-[Airplanemode]

*1 to [Off] in the desktop mode.

3. To turn off the Bluetooth communications, set [Bluetooth] to [Off].

To turn on the Bluetooth communications, set [Bluetooth] to [On], and then;

*1 : Screen messages are explained in [English (United States)].

(Depending on the language preference, some screen messages in these instructions are different from the actual screen

messages. For example, [Flight mode] may be displayed instead of [Airplane mode] in some language preference.)

To check the Bluetooth communication status

1. Touch (Settings) - [Devices] - [Bluetooth].

Alternatively, touch (Start) - (Settings) - [Devices] - [Bluetooth] in the desktop mode.

You can also touching on the task tray, and then touch (Bluetooth) - [Show Bluetooth Devices] to

check the communication status.

Bluetooth

NOTE

This computer is equipped with the Wireless WAN enabling you to communicate using radio frequencies.

Communication is established through the Wireless WAN antenna (A). Do not block the antenna area with

your hand or body.

To use wireless WAN, set [Wireless WAN] of [Wireless Configuration] to [Enabled] (default) in the

[Advanced] menu of the Setup Utility.

Before the computer enters sleep or hibernation, cut the Wireless WAN communication. Entering sleep or

hibernation without cutting the connection may disable communication after resuming. In this case,

restart the computer.

If “Device driver software was not successfully installed” (or a similar message) appears when starting

the computer or resuming from sleep or hibernation.

When communication works normally, Wireless WAN is operating correctly.

If communication fails, the device may not be recognized correctly. In this case, restart the computer.

Do not use the microSIM card adapter.

Do not insert microSIM cards on which labels or stickers are affixed. Failure to obey may result in

malfunction.

Inserting/Removing a microSIM Card

Before using the Wireless WAN, set a microSIM card to the microSIM card slot.

Be sure to turn off the computer before inserting or removing the microSIM card.

To insert a microSIM card

1. Turn off the computer.

2. Disconnect the AC adaptor, remove the battery pack. ( Remove the Battery Pack)

3. Open the cover (A).

Wireless WAN

NOT

CAUTIO

4. Insert the microSIM card into the microSIM card slot (B) with the contact side facing downward and with

the cut corner oriented as shown in the illustration.

Do not insert the microSIM card upside down.

5. Close the microSIM card slot cover.

If the cover is not closed, the microSIM card may jump out when the computer falls.

6. Insert the battery pack and connect the AC adaptor.

To remove a microSIM card

1. Turn off the computer.

2. Disconnect the AC adaptor, remove the battery pack. ( Remove the Battery Pack)

3. Push the card.

It will come out of the slot a little bit.

4. Pull the card all the way out.

5. Close the microSIM card slot cover.

6. Insert the battery pack and connect the AC adaptor.

Connecting to a network

1. Touch (Settings) - [Network & Internet] - [Cellular].

Alternatively, touch (Start) - (Settings) - [Network & Internet] - [Cellular] in the desktop mode.

CAUTIO

Andere Handbücher für FZ-M1 Series

Inhaltsverzeichnis

Andere Panasonic Tablette Handbücher

Panasonic

Panasonic FZ-S1 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook FZ-T1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-A1series Bedienungsanleitung

Panasonic

Panasonic Toughbook FZ-G1 Bedienungsanleitung

Panasonic

Panasonic FZ-M1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-Q2 series Bedienungsanleitung

Panasonic

Panasonic TOUGHPAD JT-B1 Series Gebrauchs- und Pflegehandbuch

Panasonic

Panasonic FZ-N1 Series Bedienungsanleitung

Panasonic

Panasonic CF-U1AQBXZAM Bedienungsanleitung

Panasonic

Panasonic FZ-G1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-M1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-G1 Series Bedienungsanleitung

Panasonic

Panasonic UT-MA6 series Leitfaden

Panasonic

Panasonic FZ-A1BDAAZAE Bedienungsanleitung

Panasonic

Panasonic FZ-G1 Series Betriebsanleitung

Panasonic

Panasonic FZ-Y1 series Bedienungsanleitung

Panasonic

Panasonic FZ-Q1 Series Bedienungsanleitung

Panasonic

Panasonic Toughbook H2 Bedienungsanleitung

Panasonic

Panasonic FZ-M1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-G1 Series Bedienungsanleitung

Panasonic

Panasonic FZ-X1 Verdrahtungsschema

Panasonic

Panasonic FZ-A2 series Bedienungsanleitung

Panasonic

Panasonic FZ-A1ADAAZAM Bedienungsanleitung

Panasonic

Panasonic Toughbook CF-D1N series Bedienungsanleitung

Beliebte Tablette Handbücher anderer Marken

Laser

Laser MID-1060 Benutzerhandbuch

MUNBYN

MUNBYN IRT09J Kurzanleitung

Motorola

Motorola MC3090R - Win CE 5.0 Professional 520 MHz Bedienungsanleitung

Dell

Dell Latitude ST Betriebsanleitung

Lenovo

Lenovo IdeaTab S6000L Betriebsanleitung

Venturer

Venturer WT9L11 Bedienungsanleitung

EDUGEAR

EDUGEAR UnoBook Bedienungsanleitung

Philips

Philips PI3210G/58 Bedienungsanleitung

ADLINK Technology

ADLINK Technology IMT-BT Bedienungsanleitung

TwinMOS

TwinMOS TwinTAB-T102D1 Bedienungsanleitung

Archos

Archos 9.7 xenon Bedienungsanleitung

Getac

Getac E100 Bedienungsanleitung

HANNspree

HANNspree HANNspad SN70T3 Bedienungsanleitung

Philips

Philips PI3105W2/55 Bedienungsanleitung

LG LG-V935 Bedienungsanleitung

Zeki

Zeki TBDB763B Bedienungsanleitung

Ricoh

Ricoh eQuill Bedienungsanleitung

DT Research

DT Research DT365CT Montageanleitung