Panasonic TZ-PCD2000 Bedienungsanleitung

Digital CATV Terminal

Operating Instructions

Model No. TZ-PCD2000

For assistance, please call : your regional operator (installer)

Before connecting, operating or adjusting this product, please read these instructions completely. Save this manual for

future reference.

TQB2AA0369

The lightning flash with

arrow-head within a triangle

is intended to tell the user

that parts inside the

product are a risk of electric

shock to persons.

The exclamation point within

a triangle is intended to tell

the user that important

operating and servicing

instructions are in the

papers with the appliance.

WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to

rain or moisture.

Important Safety Instructions

Note To CATV System Installer

This reminder is provided to call the CATV system installer’s attention to article 820-40 of the National Electric Code

that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to

the grounding system of the building, as close to the point of cable entry as practical.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide

blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12)Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the apparatus. When a cart is used, use caution when moving the cart /

apparatus combination to avoid injury from tip-over.

13)Unplug this apparatus during lightning storms or when unused for long periods of time.

14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam-

aged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock do not remove cover or back. No

user-serviceable parts inside. Refer servicing to qualified service personnel.

The double insulation symbol ( a square within a square ) is intended to alert qualified

service personnel to use only identical replacement parts in this apparatus.

Additional Instructions

lPower Sources

This product shall be operated only from the type of power source indicated on the marking label. If you are not sure

of the type of power supply to your home, consult your Cable operator or Digital CATVTerminal installer or local

power company.

lOverloading

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

lObject and Liquid Entry

Never push objects of any kind into this product through openings as they may touch dangerous voltage points or

short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

lServicing

Do not attempt to service this product yourself as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to qualified service personnel.

lReplacement Parts

When replacement parts are required, be sure the service technician has used replacement parts specified by the

manufacturer. Unauthorized substitutions may result in fire,

electric shock or other hazards.

lSafety Check

Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to

determine that the product is in proper operating condition.

lDamage Requiring Service

Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product does not operate normally by following the operating instructions.Adjust only those controls that are

covered by the operating instructions as an improper adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to restore the product to its normal operation.

d. If the product has been dropped or the cabinet has been damaged.

e. When the product exhibits a distinct change in performance - this indicates a need for service.

f. If the product has been exposed to rain or water.

Additional Instructions

lOutdoor Antenna Grounding

If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded

so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National

Electrical Code,ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting

structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See

Figure.

Installation

This unit Location

Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or

moisture.

To insure optimum color purity do not position magnetic equipment (motors, fans, other speakers, etc.) nearby.

Optional External Equipment

The Video /Audio connection between components can be made with shielded video and audio cables. For best

performance, video cables should utilize 75 Ωcoaxial shielded wire. Cables are available from your dealer or elec-

tronic supply house.

Before you purchase any cables, be sure you know what type of output and input connectors your various compo-

nents require.

Also determine the length of cable you’ll need.

AC Power Supply Cord

CAUTION: To prevent electric shock, match wide blade of plug to wide slot ofAC outlet and fully insert. Do not use

this (polarized) plug with a receptacle or other outlet unless the blade can be fully inserted to prevent

blade exposure.

Do not place this unit upside down or in a vertical position.

Do not install and use this unit upside down.

Do not install and use this unit standing on its side.

Care and Cleaning

Turn Digital CATV Terminal Off

For Digital CATV Terminal, avoid excessive moisture and wipe dry.

Avoid bumping or scraping the Digital CATV Terminal.

Remote Control

For Remote Control, use a soft cloth dampened with water or a mild detergent solution.Avoid excessive moisture and

wipedry.

Do not use benzene, thinner or other petroleum based products.

EXAMPLE OFANTENNA GROUNDING AS PER

(NEC) NATIONAL ELECTRICALCODE

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD-IN WIRE

ANTENNADISCHARGE

UNIT(NECSELECTION

810 - 20)

GROUNDING

CONDUCTORS(NEC

SELECTION 810 - 21)

GROUNDCLAMPS

POWER SERVICE GROUNDING

ELECTRODESYSTEM

(NECART 250,PART H)

FCC STATEMENT

FCC INFORMATION

Your Digital CATV Terminal is registered with the Federal Communication Commission and is in compliance with

CFR47, Parts 15b, FCC Rules and Regulations.

Radio Interference

This equipment has been tested and found to comply with the limit for a Class B Digital Device in accordance with the

specifications in Part 15 of FCC Rules. The rules are designed to provide reasonable protection against radio and

television interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause interference to radio or televisions reception (which you can determine by turning the

equipment off and on), try to correct the interference by one or more of the following measures.

lReposition or relocate the receiving antenna for the radio or television that is “receiving” the interference.

lChange the position of the Digital CATV Terminal with respect to the radio or television equipment that is receiving

interference.

lMove the Digital CATV Terminal away from equipment receiving interference.

lPlug the Digital CATV Terminal into a different wall outlet so the Digital CATV Terminal and equipment receiving the

interference are on different branch circuits.

If these measures do not eliminate interference, please consult your dealer or an experienced radio/television techni-

cian for assistance.

FCC CAUTION:

Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or

modifications to this Digital CATV Terminal not expressly approved by

Matsushita Electric Corporation of America could cause harmful

interference and would void the user’s authority to operate this device.

FCC Declaration of Conformity

PANASONIC CONSUMER ELECTRONICS COMPANY

Responsibleparty:

Matsushita Electric Corporation ofAmerica

One Panasonic Way

Secaucus, NJ 07094

U.S.A.

Telephone Number: 201-392-4430

(8 a.m.-10 p.m., Mon-Fri, EST)

(10 a.m.-10 p.m., Sat-Sun, EST) OR

E-MAIL: CONSUMER PRODUCTS@PANASONIC.COM

This device complies with Part 15 of the FCC rules. Operation is sub-

jecttothefollowingtwo conditions:(1) thisdevicemaynotcause harm-

ful interference, and (2) this device must accept any interference re-

ceived, including interference that may cause undesired operation.

Dear Panasonic Customer

Welcome to the Panasonic Family of customers. We hope that you have many years of

enjoyment from your new Digital CATV Terminal. To obtain maximum benefit from your

set, please read these Instructions before making any adjustments, and retain them for

future reference.

Retain your purchase receipt also, and note down the model number and serial

number of your set in the space provided on the rear cover of these instructions.

Table of Contents

For assistance, please call : your regional operator (installer)

Important Safety Instructions ................................................................................................................................ 2

FCC STATEMENT.................................................................................................................................................... 5

Installation .............................................................................................................................................................. 7

ACCESSORIES ........................................................................................................................................ 7

Remote Control battery installation .............. ............................................................................................. 7

Front and Rear View of the Digital CATV Terminal .................................................................................... 8

Cable connection....................................................................................................................................... 10

Digital CATV Terminal connection to stereo TV and stereo VCR ............................................................... 10

Digital CATV Terminal connection to TV and VCR..................................................................................... 11

Digital CATV Terminal connection to component with DigitalAudio Input jack ........................................... 12

ConnectAC Power Cord ........................................................................................................................... 12

Power ON/OFF ......................................................................................................................................... 13

Changing the TV input source (Panasonic TV models) ............................................................................. 13

Remote Control ...................................................................................................................................................... 14

Programming the Remote Control ........................................................................................................................ 17

Troubleshooting ..................................................................................................................................................... 25

Specifications ......................................................................................................................................................... 26

Trademark acknowledgements

l“VCR Commander” is trademark of Scientific-Atlanta, Inc.

l“Dolby” and “AC-3” are trademarks of Dolby Laboratories.

All other trademarks are the property of the various trademark owners.

Installation

ACCESSORIES

Check the accessories before installations.

lOperating

Instruction book lAC Power Cord lRemote Control

Unit lBattery for the Remote

Control Unit

(2×AA (IEC R6) size)

Remote Control battery installation

1.Push the section marked with

an arrow while lifting the cover

up to open it.

Requires two AA batteries.

2.Install the batteries as shown in

the battery compartment.

(Polarity + or - must match the

markings in the compartment).

3.Close the cover by inserting the

top end first.

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.

Observe the following precautions:

1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline” ).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn used batteries.

5. Battery replacement is necessary when remote control acts sporadically or stops operating this unit.

Helpful Hint:

Whenever you remove the batteries, you may need to reset the remote control infrared codes. We recommend

that you record the code on page17-24, prior to setting up the remote.

TwoAA size

Installation

Front and Rear View of the Digital CATV Terminal

Front Panel

POWER indicator(LED)

Volume - Button

Channel + Button

Volume + Button

MESSAGE indicator(LED)

Display

BYPASS indicator(LED)

Power Button

Factory use only

Channel - Button

Factory use only Remote control signal

receptor

Door

Pull the door toward you to open it.

Card Slot

POWER Turns the Digital CATV Terminal Power On or Off.

VOL +- Select Volume Up or Down

CH +- Select Channel Up or Down

MESSAGE Message indicator

BYPASS Bypassindicator

Card Slot This is currently not being used. It is reserved for future applications as the place for cards to be

inserted.

Installation

Rear Panel

AUDIO jacks

VIDEO jacks

CABLE OUT jack CABLE IN jack AC Switched Outlet

DATAPort

USB(Universal

Serial Bus) Port

S-VIDEO jack DIGITAL AUDIO OUT

BYPASS option

AC Power Input

CABLE IN

CABLE OUT

VIDEO

S-VIDEO

AUDIO

DIGITALAUDIO

OUT

DATA

USB (Universal

Serial Bus)

BYPASS

AC Power Input

AC Switched

Outlet

Use to connect Cable Signal from Cable Service Provider.

Use to connect the Digital CATV Terminal to your TV or VCR.

Use to connect the Digital CATV Terminal to your TV with S-VIDEO, or VCR with S-VIDEO.

Use to connect the Digital CATV Terminal to your TV with stereo sound, or VCR with stereo

sound.

Use to connect the Digital CATV Terminal to a Dolby DigitalAC-3 decoder.

Use to connect the Digital CATV Terminal to the VCR CommanderTM module or similar

equipment.See the VCR CommanderTM User’s Guide for more information.

Use to connect the Digital CATV Terminal to external equipment.

Use to connect a RF Bypass Module (optional) to bypass the Digital CATV Terminal when

watching regular cable TV broadcasts.

Use to connect the Digital CATV Terminal to an AC electrical outlet with AC cord (included).

Use to connect the power cord plug of some other component such as a TV.

(120 VAC, 60 Hz, 5 A)

Installation

Cable connection

Connect the cable wire to the CABLE IN jack on the rear panel of the Digital CATV Terminal.

Incoming signal from the Cable Service Provider

Digital CATV Terminal connection to stereo TV and stereo VCR

Follow this diagram when connecting the Digital CATV Terminal to a stereo TV and stereo VCR.

VCR or S-VCR

TV or S-VCR

Procedure

1Connect S-VIDEO Cable from the S-VIDEO output jack on the Digital CATV Terminal to the S-VIDEO input jack on

the TV or S-VCR.

Note:Connect either the S-VIDEO or video input/output as shown above.

lS-VIDEO will provide better picture quallity.

2Connect audio cables from the left and right audio output jacks on the Digital CATV Terminal to the left and right

audio input jacks on the TV or VCR (S-VCR).

Note:

lAdditional equipment and cables shown are not supplied with this set.

Unplug theAC power cord and disconnect

all cables attached to the Digital CATV Termi-

nal.

Inhaltsverzeichnis

Andere Panasonic Touch-Terminal Handbücher

Panasonic

Panasonic JS-970 Series Bedienungsanleitung

Panasonic

Panasonic HM 700 Series Bedienungsanleitung

Panasonic

Panasonic HMs700 Series Bedienungsanleitung

Panasonic

Panasonic JS-925 series Bedienungsanleitung

Panasonic

Panasonic TY-FB9HD Bedienungsanleitung

Panasonic

Panasonic FZ-VEBG12 Series Bedienungsanleitung

Panasonic

Panasonic TY-FB8HM Bedienungsanleitung

Panasonic

Panasonic GT02 Bedienungsanleitung

Panasonic

Panasonic JS-950 Series Bedienungsanleitung

Panasonic

Panasonic S-LINK V SL-VTPR Series Bedienungsanleitung

Panasonic

Panasonic HMWIN Bedienungsanleitung

Panasonic

Panasonic HMs700 Series Bedienungsanleitung

Panasonic

Panasonic TY-42TM6G Bedienungsanleitung

Panasonic

Panasonic JS-950 Series Bedienungsanleitung

Panasonic

Panasonic POS Workstation JS-950WS Bedienungsanleitung

Panasonic

Panasonic HMX700 Series Bedienungsanleitung

Panasonic

Panasonic JS-925WS Bedienungsanleitung

Panasonic

Panasonic JS-925WS-010 Bedienungsanleitung

Panasonic

Panasonic KX-DTU100 Bedienungsanleitung

Panasonic

Panasonic JS-960WS Series Bedienungsanleitung

Panasonic

Panasonic CT-2 Series Bedienungsanleitung

Panasonic

Panasonic HMe Series Bedienungsanleitung

Panasonic

Panasonic S-LINK SL-TPR4 Bedienungsanleitung

Panasonic

Panasonic HMe Series Bedienungsanleitung

Beliebte Touch-Terminal Handbücher anderer Marken

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Bedienungsanleitung

Ingenico

Ingenico AXIUM EX4000 Bedienungsanleitung

Heisei Electronics

Heisei Electronics Q-POS 815 Bedienungsanleitung

Amano

Amano MTX-15 Bedienungsanleitung

FLOWBIRD

FLOWBIRD CWT Compact Touch Bedienungsanleitung

Demco

Demco SP7 Bedienungsanleitung

Lathem

Lathem PC600 Series Bedienungsanleitung

Partner

Partner MF-2352 Bedienungsanleitung

NCR

NCR RealPOS 7460-2 Handbuch

Simrad

Simrad MS50 Montageanleitung

Unitech

Unitech MR350 MKII Kurzanleitung

Jungheinrich

Jungheinrich WMT 210 Bedienungsanleitung

Motorola

Motorola MTP850 Bedienungsanleitung

YASKAWA

YASKAWA 62H-MDC0 Bedienungsanleitung

MVG industries

MVG industries NeptuLink Bedienungsanleitung

Price Industries Limited

Price Industries Limited FDC Gebrauchsanweisung

Honeywell

Honeywell TemaKey Bedienungsanleitung

EBN

EBN BPC65-B-A16G Bedienungsanleitung